Bigger Better Big Arch Burger

Health Food
429 followers
AI Generated·May contain errors
Hello, this is Chef John from foodwishes.com with a Bigger Better Big Arch Burger.
That's right, not only will I show you a larger and I think far superior version of
McDonald's offering, I'm also going to show you an easier and better way to do smash burgers.
And as if that wasn't enough, I'm also going to remind everybody about the world's most underrated
crunchy snack food. And to get started, we'll begin by building our Bigger Better Big Arch
which starts with some mayonnaise, to which we will add some ketchup, some yellow mustard,
some sweet pickle relish, and of course go ahead and use dill pickle relish if you want.
But we're actually putting sliced dill pickles on the burger, so I think sweet's the way to go.
Then we'll also want some garlic powder, some smoked paprika, a little splash of cider vinegar,
followed by exactly three shakes of cayenne to make it bigger and better. And that's it. We'll
take a spoon and give it a mix, and then keep it in the fridge until we need it. And yes, this is
even better if you make it ahead. And once that's set, we will move on to one of the world's most
underrated crunchy snacks, Funyuns, which are like onions but more fun. And we'll be using these
instead of what McDonald's uses, which are those little crumbly fried onions that your aunt puts
on the green bean casserole every year. And those are fine, but this is going to taste better and be
crunchier. And then besides the Funyun, the other stuff going on this burger is going to be some
sliced dill pickles, as I mentioned, some thinly sliced fresh red onion, and of course some iceberg
lettuce, which I think should be thinly sliced. And once that stuff's set, we can move on to the
meat. And what we'll do is make two patties, which I'm going to smash flash between plastic,
and with a classic smash burger, we place the ball of beef in the pan, and then we smash it flat.
But for the home cook, instead of trying to do that in the hot pan, I think smashing ahead of
time like this is much easier, and we can get a nice uniform shape and thickness. And as you'll
see, we're going to get the same beautiful crusty crispy surface. And once pressed, if we want
something neater, we can go around and fine-tune the edges with our fingers. And by the way, we're
I'm sure this would be fine with the more standard size, so you decide. I mean, you are,
after all, the Samuel L. Jackson of your protein maxing, but either way, this is going to be a
tasty burger. Speaking of which, before we start frying our burgers, let's take our burger bun
and open it up and spread over a little bit of our sauce, since what we'll do before our pan gets
is toast our bun to warm it up and give that inside surface a little bit of crispy texture.
Plus, by cooking it a little bit, this portion of sauce is going to have a little bit of a
different flavor profile to the copious amounts we're going to spoon over the bun later.
So I think this is a nice little trick that makes any burger better, and I don't think
there's anything more beta than serving a nice burger on an untoasted bun. And once that's been
accomplished, we'll set that aside, and we'll crank up our heat to high and wait for the pan
to get nice and hot, at which point we'll transfer in our pre-smashed mash burgers,
and then we'll take our spatula and we'll give those a nice pressing down to make sure that
meat's stuck to the bottom of the pan, which is kind of the key to create that nice crispy crust.
And once those are nicely adhered, we will generously season the top with some salt and
ground black pepper. And because these patties are nice and thin, we only have to season one side.
And then what we'll do is let these cook for just a couple minutes, or until we see that
meat around the bottom edge lose that raw red color. And once the bottom of the burger looks
like that, we'll take our spatula and we will loosen those front edges, because before we go
in from the back, we always want to loosen the front. And that's it. We'll take our spatula
and loosen the other side, before we forcibly, but very carefully, scrape all the way through.
And I'm going to flip that first one over, breaking off a small piece, so that when I flip the next
one over, it will fly across the pan. And the reason I did that totally intentionally was to
show you that if that happened, and a piece of meat breaks off, push it and poke it underneath
the burger's edge anywhere, and it will magically reattach. And we can all pretend that never
happened. And then as soon as you do flip a smash burger, you want to immediately place over
your cheese, which for a bigger, better Big Arch burger, is going to be some white cheddar.
And once that's on, as soon as it's melted, which is only going to take a minute or so,
our burger is going to be cooked through and ready to serve up. And what we'll do is transfer
that onto a plate, and let it rest for just one minute, while we dress our toasted bun,
which for me starts with quite a bit of our sauce. All right, the trade-off with a smash burger
is that we're sacrificing a little bit of moisture in the burger, and a little bit of juiciness,
for that incredibly flavorful, super beefy, crispy caramelized crust. So do not be shy when
you're spreading that on. And once that's been applied, we will lay down some freshly sliced
red onion, which I think are so much nicer than what you get at McDonald's, which I believe are
those little slivered white onions, that someone cut about seven hours ago, and they're like way
too strong. And that's it, we'll top those with our Funyuns. And I'm going to go with three small
to medium ones, but you put on as many as you can fit. And then over that, we'll go with our third
piece of cheese, which I know is not melted yet, but it's pretty much going to be when we place
over those hot smash burgers. And once those have been placed over, we will lay down our three dill
pickle slices, followed by some more freshly sliced onion, and then our last set of Funyuns.
And then our last step is to top this with iceberg lettuce, which I'm going to pile on the bun,
and then attempt to flip over on top, without everything exploding.
All right, maybe it's easier to pile it on the Funyuns, and then top it with the bun.
But either way, we will place that over and press it down, at which point you'll just start eating.
Okay, I wasn't able to immediately, since I had to fuss around a little bit, and do some food
styling, since I had to place it in front of a side of Funyuns, and then take my contractually
obligated picture. But eventually, I was able to pick that up, and bite in. And that, my friends,
truly was a bigger, and I think much, much, much better, big arch burger. Or so I assume,
since I've never had one. Okay, I did watch a video of one being made in a McDonald's,
as well as more than a few reaction videos. And of course, the famous clip of the CEO trying it.
And based on all those observations, I've concluded, this is way, way better.
Right, those Funyuns really are incredible, and they retain their crunchy texture,
and have a beautiful savory onion flavor. And if you do have a nice big cast iron pan,
and you can do the smash burger method I showed you, it really is shocking how much better your
burger will taste. And besides being more intensely beefy, and super, super savory,
that texture from the crispy crust, really does take the cheeseburger experience up to another
level. So if you're looking to bite into a big burger, I could not recommend this anymore.
And by the way, I wanted to call this the Alpha Arch Burger, but apparently that's the name of a
dental implant. And you know, some people might have got confused, so my corporate overlords
suggested we come up with another name. But no matter what you call this burger,
or whether you've had the original Big Arch Burger or not, this was incredible,
and I really do hope you give it a try soon. So please follow the links below for the ingredient
amounts, a printable written recipe, and much more info, as usual. And as always, enjoy.
