Ground Wire Explained

Terrific Physics
43 followers
So the hot wires carry the electrical current
from the supply and over to the load,
and the neutral wires carry the electrical current
from the load and back to the supply.
So what does the ground wire do?
The ground wire, under normal operating conditions,
will not carry any electrical current.
This wire will only carry electrical current
in the event of a ground fault.
Hopefully, this wire will otherwise never ever be used
at all in its entire life.
It's just there for an emergency path
for the electricity to get back to the power source
instead of it passing through you.
The ground wire, in most cases, is a bare copper wire.
It's uninsulated, but in some cases,
it is covered with a green insulation.
This wire provides a very low resistance path
directly back to the source,
so electricity will prefer to travel along it
because it's easier and can get back quicker.
Connected to the main panel,
we will find a thick copper wire
which leads out to a ground rod.
A ground rod is buried into the ground
outside near the property.
This rod is not used for ground faults.
Its purpose is to dissipate static electricity
and external high voltages like lightning strikes.
There is also a ground rod connected to the neutral
at the transformer.
Many people think that during a ground fault,
electricity flows through their ground rod
and into the earth.
But remember, electricity tries to get back to its source.
It doesn't just go into the earth.
And as there is a ground rod at the transformer,
then there is a potential path for the electricity
to get back to the source.
But this path will have a very high resistance or impedance.
And as we know, electricity will take preference
over the path with the least resistance.
So as we already have a very low resistance ground wire
which provides a path directly back to the source,
the ground fault is going to take this route instead.
The electricity flows through the hot wire
and into the light and then back through the neutral.
But if the hot touches the metal casing,
then it will instead flow through the ground wire,
back to the panel, through the buzz bar,
and then back to the transformer via the neutral wire.
The ground wire has a very low resistance
which causes a huge and instantaneous increase in current
which will trip the breaker.
We therefore connect the ground wires to anything
that could potentially become a potential path
for electricity to leave its circuit
such as the metal pipes, the metal plates
and the light switches and the outlets of their boxes.
We also need to run one to the outlets
because often our appliances are made of metal
or they're covered with a metal casing
for things like washing machines and microwaves.
When you look at a receptacle and plug,
you'll see that there is a hot terminal,
a neutral terminal and a ground terminal.
The casing of something like a washing machine
is connected to a ground wire in the lead
which goes to the plug, through the receptacle
and back to the panel to save you from an electric shock.
Now, let's say you're outside with no shoes on
and the ground or the soil is moist.
If you touch a hot wire, you could complete the circuit
and the current may pass through you
to get back to the supply.
In this case, the resistance is going to be very high
so the current might not be high enough
to automatically flip the breaker and cut the power.
This will likely lead to the person's death.
Okay guys, that's it for this video
but to continue your learning,
then click on one of the videos on screen now
and I'll catch you there for the next lesson.
Don't forget to follow us on Facebook, Twitter, Instagram
as well as TheEngineeringMindset.com.
