Installing a ceiling fan "housing"

VideoJoeKnows
61 followers
1 Video View·Jun 7, 2026
http://www.VideoJoeKnows.com Any ceiling fan will have a housing unit that gets connected to "this". Does it make a difference which "direction" the ceiling fan housing is installed?.........yes! Watch this video for installing a ceiling fan housing.
http://www.VideoJoeKnows.com
AI Generated·May contain errors
Okay, here's our ceiling fan box up in the ceiling.
I've got wire nuts on the individual wires,
so I'm gonna take those off.
Before I do that, I'm gonna make sure
that my switch that I installed in the wall is off,
and I'm gonna take these wire nuts off,
and I'm gonna test the wires with a little wire tester,
just to make sure that we got all the power off.
Do not hook this up hot.
Okay, I've taken the wire nuts off,
and I tested this with my little wire tester from before.
I just pushed it on the white wire and the black wire.
Nothing happens.
I tried the fan, and I turned it on.
Now I've turned it off, so what you wanna make sure is,
you wanna make sure that your power's off.
You wanna double-check it,
even triple-check it if you feel like it.
Main thing is, this wire needs to be off, okay?
So now I'm ready to go.
I'm just gonna take this wire, and I'm gonna unroll it,
and I'm gonna take off this outside sheathing.
I'm gonna use a sheetrock knife.
Make sure you got a sharp blade.
I'm just gonna score the outside of this plastic,
or this rubber sheathing, just gently,
hardly anything at all.
I'm just scoring it,
maybe cutting a little bit more than that,
and then I can pull this out like that.
I can take the outside paper off up to there.
I can hold that, pull on it a little bit.
Just take your knife, just kind of saw it off,
okay, like that, and then I'm gonna do this paper
that's wrapped around the ground, okay?
So that's what you want for that right now.
Okay, this mounting box is gonna fit up in here.
There's notches on here,
so there's quite a few different notches,
so I'm gonna line it up with the screws up there.
Before I do that, I'm gonna take my little mounting screws.
These were left in when it was painted,
so I'm gonna clean off these screws a little bit,
and I'm gonna dry fit this up,
make sure everything's ready to go.
I'm gonna slip this up in here,
and I'm just gonna look and see
which notches I wanna utilize.
Now, this is a flat ceiling,
so it really doesn't matter where this notch fits.
It just matters where I feel comfortable off of my ladder,
how I'm gonna lift the fan up
and fit it down into this notch.
Now, if you were on a cathedral ceiling,
this would be at an angle,
so there's a little notch in here
where the knuckle fits in.
You would want that angled downward,
but here, it's not gonna matter, okay?
So however you feel comfortable fitting that up.
I'm gonna make this notch fit towards me
so that you guys can see what I'm doing,
and I'm gonna screw this up in here now.
Okay, I'm gonna screw this up here,
but before I do that, remember,
on this housing here has a green wire attached to it,
so this ground wire needs to be connected
to this ground wire.
Well, I've got a metal box up here,
so just for convenience sake,
before I screw this up in here,
I'm gonna wrap this around one of my mounting screws,
and I'm gonna leave the pigtail,
and I'm gonna hook this up later.
That way, this ground is kinda connected
to the metal box, too, just for safety purposes.
Okay, I've attached my ground wire up to a mounting screw.
I've got them down like that.
Now, I'm ready to slide the mounting housing
up there for the fan.
Okay, I've got the screws up in here.
Now, there's a little bit of play in this mounting bracket,
and I've previously centered the mounting box
before we did the sheetrock exactly where I want it,
so what I'm gonna do is I'm just gonna center this.
Even though there's only a slight play,
I'm still gonna center it.
On your project, if you have to slide it over
to cover something up, you know,
a mark on the wall or something, you can do that,
but you've got just a little bit of a flex here,
but I'm centering mine.
Okay, after I center it, I'm just gonna hold it up there
and tighten up my screws.
Now, as I told you, on mine,
the knuckle around this is on the far side.
You can't really see it, but where these wires are,
I'm gonna reroute these wires through this,
because once I lift the ceiling fan up in here,
I've gotta reach around and fit the knuckle,
lift the knuckle up on this side over here,
and slip it into this slot,
so I've gotta get these wires out of the way.
Okay, I've rerouted the wires over on this side,
so now I'm clean and free over on this side here,
so I'm ready to bring the ceiling fan over here.
Now, make sure you read your directions and everything.
This particular ceiling fan has a light switch
that's a manual light switch.
Some have an automatic free-holding unit
that you can turn on and off.
Obviously, if you have something like that,
then you'll wire it a different way.
I'm basically doing it the way the directions say for this.
If your ceiling fan is slightly different,
follow the directions.
