2013 FORD C-MAX HYBRID FUEL TANK REMOVAL at Arizona automotive institute.

Charley’s Garage
78 followers
I work with some Arizona Automotive Institute students to remove the fuel tank from a 2013 Ford C-Max #Hybrid. This car was donated to AAI for a training aid but has been sitting unused in a lot for 4 years. The fuel is not good by this point so we are removing the tank to drain and purge the fuel system before we attemt to start it.
#arizona automotive institute, #hybrid donation, #oldgas
https://youtube.com/@charleysgarage
Hello, welcome back to Charlie's Garage. So what we're looking up here on the left is a Ford
Hybrid C-Max. So this C-Max was donated to us to use as a training aid here at AAI from a Ford
dealership. And one of the things that we have to do to it is it has been sitting for a very long
time. And what we need to do is we need to pull the fuel tank out of this guy and clean it and
flush the fuel line because it's been sitting for about four years without being run. So gasoline
sits for that long without being run. Some bad stuff happens to it and it's better to just get
it out of the car. It's not healthy for it. So if we take a quick look up underneath here,
you'll see what I'm going to be having our students do tonight. So the fuel tank is inside
this protective guy right here. Got a couple of straps that hold this guy on. But the more
important thing is that we're going to have to drain it. So what I'm going to be having the
students do is disconnect the hose that feeds that from the fuel tank feed into there. And then we
can use a fuel tank suction tube, stick it there and drain the tank before we drop it. Makes it a
little safer and less heavy. So that's going to be the student's project for tonight. We're going to
drain and drop this tank. Then we're going to clean it up, blow out some of the lines,
get some of the nasty fuel out of them and then reinstall this fuel tank. So the students
aren't here yet. I just wanted to give you guys a preview of what the rest of this video is going to
be about. So when the students get here, we're going to do a quick safety topic on how to do
this the right way without getting hurt. And then we'll proceed with filming the actual job when
they get here. All right, so we're out here back on the C-Max. We got Alex is working on pulling
this tank for us. Right now he's removing the heat shield that's going to be in the way.
All right, so this heat shield wraps around this guy pretty well. It almost looks like if we were
going to want to be able to fully take that off, we would have to pull that guy off. So what I'm
thinking is that now that we have it loose, when we drop this, we should have room to drop it a little
bit and then come to the side and drop it down around it. We got room now to kind of move it to this support hole.
So what we were seeing is that this heat shield kind of goes right here. It goes up around the
top of this. We're hoping that we have enough room right here to drop it without pulling the heat
shield out completely. Don't take that all the way out because we don't want it to drop.
So what our goal is going to be first is to get the back of this to drop enough for us to access
this tube, this fill tube. And if we can come down just a little bit, we can get to it better and get it flush to go.
So let's go ahead and back these backings out and I'll kind of support it so it doesn't fall.
Drop that one. We got support there. We're now working on the front of the straps.
Just got to keep it from falling on our heads while we get the fronts off.
Yeah. And hopefully we can drop it just a few inches enough to kind of get better access to
the stuff up top that we got to disconnect. So that's kind of the next step is to kind of lower
that a little bit. All right. So I couldn't really hold the camera and help those guys take this tank
out. So this video is going to be heavily edited, but we did get the tank out. We got the two straps
off, which let us drop the tank enough to get to the two fuel lines, the one coming from the fill
port and the one coming from the return here. Basically, we were able to get those two off.
And then once we got those two off, we were able to drop it enough to pull the fuel pump
off and disconnect the line, which is the only thing that was really holding the tank on
or up in the air after that. And so we used this scientific tool to hold it up called a trash can.
The trash can did the job perfectly well, held the fuel tank up while we got that guy off.
So looking at it basically, since it's been set for four years, the fuel in there, it's kind of
hard to see on video, but it has a pretty distinct smell to it. Not something you probably want to
keep in there, so we're going to drain that out, clean it. And since we already have the tank
dropped and we have this pump out, based on some of the discoloration I've seen on it and the fact
that it's had nasty fuel sitting in it so long, we're probably just going to go ahead and replace
this pump and the small line here. The other thing that we're going to look for, and I need to go
online and check, is this is the fuel line leaving the tank from the fuel pump. I'm not 100%
sure, so I'm going to have to get online and search for it. If this has an external fuel filter,
we're going to replace it too. And once we trace where this line goes, maybe blow some air through
it from the other end to clean out any of the nasty fuel that might still be in the line.
So basically, at this point, it's just cleaning the tank out, replacing any filters,
blowing out the lines, replacing this fuel pump, and then putting it all back together.
It seems like the easiest thing to do once we figured it out was just simply to
take the two straps underneath it all the way off with some help supporting it with the
little jack stand right there. And then we were able to lower it enough to get everything off of
it. So that's pretty much it. This is easier to come out than I thought it would be,
but there were some parts of it that were harder because of dry rotted connections and stuff. So
anyway, that's how you get the fuel tank out of the C-Max.
