Tuning a Hoo-dini Hybrid Longbow | Great Plains Traditional Bow |

Crossbows Legacy
11 followers
4 Video Views·Jun 6, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedThis video provides a professional guide to tuning a 54-inch Houdini hybrid longbow. The process covers managing aggressive limb profiles, correcting twists, and utilizing \"trapping\" and sanding techniques to reduce draw weight and optimize the tiller for a smoother, more stable, and marketable performance.
Hello guys. So we thought today I would show you how I tune a Houdini.
And I'm feeling a little bit wacky and smacky today. I just showed my daughter
the different hockey shots, slap shot, slapper, wrist shot, snap shot. It was fun. I dented the
wall a little bit. But the Houdinis are an interesting animal to tune. They're a hybrid
longbow. You can see they're super aggressive. Very, very aggressive longbow. And they are a
challenge to tune. For sure the long ones. The long ones are a mess. Like this one here.
The long ones. This is a 62 inch Houdini. Look at that. Look at the aggressive limb on that
banana bow there. Very difficult to tune correctly if you want to do a good job.
I'm still working out the specs and the design and layout of the long Houdinis.
They perform absolutely unbelievably awesome in the longer lengths. But
they're tough. They're tough to tune. So I think I'm going to try a few different things. One of
those I think is what I'm going to do is simply widen the limb and give it more stability. They
have that 20 thousandths carbon core which helps tremendously. This bow in a longer length would
not even be possible without carbon. It would squirrel all over the place. So the carbon makes
it possible with a profile like this. But what I'm going to do is make that limb wider and I
think I'll have better luck. But today I'm going to show you how I tune a 54 inch Houdini. This
happens to be a black and white ebony Houdini with an FR4 cap. Gorgeous bow. So I'm going to
just get started and show you how I go about tuning these things. Okay. So first thing I do is string
it up. That's the first time that a Houdini is strung. On our recurves, on my recurves, I string
them up beforehand to mark the profile because that's the way you have to do it. On a Houdini
it's really difficult. You can string them before the tips are done but it's a mess so I don't
generally do it. And that is the correct string length. So we can look here and I can just glance
at this and I don't even check the tiller at this stage because I can look and I can tell you right
off that tiller is about even. And even if it's off a little bit I just don't care because it
doesn't matter at this point. So here we go. The next thing I do is I check the weight. So I grab
my arrow go ahead knock it and I'll go ahead and when I'm when I'm a new bow it's sort of like you
break it in just kind of gradually. It's not if it's going to fail on you it doesn't matter what
you do here. It doesn't matter if you break it in gradually or anything it's going to fail.
However, sometimes if you've got a splinter fixing to lift because the edge is a little
bit too sharp or something if you do it gradually like I'm fixing to show you you can catch that
you can send that splinter off and you can save it from lifting up on the limb
because you can hear it creak or you can see it. So what I'll do this is what I do I just
kind of go incrementally I feel I look I listen and I see where I'm at keep going down until I
hit my 28. Okay so this feels really good it looks good there's nothing lifting so I'm here at 28
and I've got 67 pounds so it's a little heavier than what I like to start with but that's okay
it'll be a really good candidate to show you what I do. So then after I have my weight I'll look at
the serial number 17910. I got my book here my record book and I'll just mark that 67 pounds
rough because we keep records of all that and that helps us get super accurate. This is an
in-stock bow but if it wasn't I would be trying to hit a weight. This particular bow started out
as a custom build but certain things happened the customer decided to keep his bow that he has
well it was the same bow he just wanted a different weight so now this one goes to in-stock. So I got
17910 57 pounds so I'll mark in here 67 pounds rough and because this bow doesn't have to be
any sort of weight I'm not going to write too heavy or too light or anything I'm just going
to write 67 pounds rough. That gives us knowledge about what's in the bow. I put this so and so much
core in here carbon glass and that layup gave me 67 pounds with black and white ebony. Species are
very very different. You can put the same the same layup in here same thickness but if you use
something like let's say pacific yew or bamboo or walnut. Walnut's a good one. It'd be a lot
different. With walnut it'd be way way lighter. You probably put the same layup in with walnut
and you're probably looking at 55 or 57 pounds. A lot different. So because we know we have a
lot of weight and we know that a 67 pound bow does not sell well we're going to go ahead and
be fairly aggressive with it. Next thing I do is I check the straightness. So I'm going to put this
on here and before I do that I'll just go ahead sight down here make sure that string is coming
off that point that tip perfectly in the center and then I'll sight down here and see where I'm
at. Okay so I have a slight deviation on the top limb just a little bit to the to my right. That
will need to be addressed. It has to be perfect before I start to trap. I cannot allow any
deviations. Okay on this one I have exactly the same thing. It's just very very slight but the
way we'll fix that is we'll mark here. I'll just mark on this limb. That's the side it's leaning
towards and on this one it's this side. Now whenever you're straightening a limb it doesn't
matter what bow whether it be a self bow, recurve, long bow, horse bow, the side that is out, the
side that is out away from the string that is twisting towards, that's the side you remove
material from because it's stronger and it's overpowering the other side and making it twist
slightly. Where in the case of this one I mean it's just very very slight but I know from experience
if I leave that at this point that can magnify intensely whenever I put the trap on and do my
other steps and I do not want that. So we have to address that now and so we'll go ahead and
unstring it real quick. The way I'll just go ahead and count my strokes on this machine here
and I'll just go ahead and take 10 swipes off both of these here limbs.
Not a very big angle just a slight angle. Now when you're tuning a bow it's incredibly important to
have very steady hands and very steady strokes. Whenever you touch down you want that pressure
to be exactly the same and you want that speed to be exactly the same as you go across there
because if you don't if there's even a slight variation you'll get ripples in your limb and
that looks terrible when you're done. So we don't want that. So now that we've done that we'll go
ahead string it back up and we'll check it. And I kind of took the little crumbs and the splinters
off the edge after I took those 10 strokes off so that I could see what I was doing. If I had
forgot to do that I can just do that with a piece of sandpaper. So once again I'll center my string
coming straight down off the tip. Center my string and now I'll see what I did. Okay okay so
on the bottom limb I got it almost perfect. Extremely close to perfect. On the top limb
I lack just a little bit. So I'm happy with the bottom limb. This time I'm not going to
unstring it because I'm so close and I'm going to do it real carefully with it strung.
Would not recommend that right there if you're just starting out
with a string on there. I have in the past when I've done that not paying attention what I'm
doing. I've touched that string down on the sandpaper and that's 40 grit paper. It doesn't
mess around and it went through that string like pow and that whole bow just sprung out of my hand.
I've done that twice. It's not fun every time you do it. It's no more fun than the last time.
Okay let's see what I did. Okay so it's not moving. It's not moving like I would like it to.
So I don't want to keep doing that because if I do, if you go too much doing that regardless of
how even you you go, you will start to make ripples. So we're going to move over to the
flat sander and we're going to clean that edge up on there and see if we can take that out.
Okay that is perfect. So now I'm going to re-look at my tiller. It stayed basically the same.
I'm ready to trap it. So now I'm going to put a trap on it. Now a trap does a couple things.
When you put a trap on it, basically what's happening is I'm going to come in here
and I'm going to take about a 30 degree cut on the edge here and I'm going to take that material off
but I'm not going to take it off the back. I'm going to leave the full width on the back of
the bow. This is the belly of the bow. Now what that does, it does a couple things. Number one,
it is going to remove the weight that I want. I want to take the weight off that way
and because I can't, like I said, I'm not going to, it's really hard to move a 65 pound bow.
It's just hard to sell something like that. We got to reduce that weight. But on a longbow
especially, on a longbow you have a thicker, narrower limb. On a recurve you have a wider,
thinner limb. So on a longbow, whenever you're drawing it, when you're pulling it towards
yourself, the belly is compressing. All the material on the belly of the bow is compressing.
Compressing, it's under compression. So when you put a taper or a trap on there and remove material
essentially off the face, a lot more material off the face of the belly than the back,
you are reducing the amount of material that you have to compress.
So what does that do? That makes a longbow draw much, much smoother because you're not
compressing all that material and so you get a far more pleasant feeling bow. You get a far
more pleasant drawing bow because you're removing a lot of the material on the compression side of
the bow. But you still retain all your speed and performance because you're not touching
the back of the bow. So when it springs back and clear after the draw, you've still got a lot of
power there, a good cast. So what we're going to do is we're going to put a trap on this,
reduce the compression of the bow so it draws smooth, but also reduce the weight.
And because I know I want to take it down quite a ways, I'm going to go 30 strokes
with the same angle holding the same way. So I'll hold it at one angle and I'll do 30 strokes and
then I'll do five to kind of clean it up and bring it back to true so it looks right. So here we go.
There you have it. You see what I did there. I put that trap on there and I did 30 strokes at
the same angle holding at the same place. And then the last five, I rotated it for each stroke
up until nothing, until I hit that edge. And that's how you have a good trap.
Over here, all I'm going to do with this machine, I've got my trap on here and you can see,
now I was kind of strategic with how I put my trap on. You'll notice it's not exactly the same
and that's because I know if I straighten one side, it kind of has a tendency to pull back over
there. So I took just a teeny bit more off of this side and also on this side off of this side.
It might look just a hair different, but I know from experience that I need to do that to keep
everything coming down. If you were doing this for the first time, you wouldn't have to do that.
But all I'm doing here is I'm just going to blend. So you can see where I stopped here.
I just need to blend that into the tip. So I need to do that and then, you know,
this doesn't look good. I couldn't leave that. So I've got to blend that into here.
That's all I'm doing here. You see, I've blended all that in. I blended it up to the tip. It
doesn't take a lot, but if you skip this step, you will be very sorry. So I blended that in,
blended that all in. So now we'll head over to the pneumatics and we're going to clean up those
deep scratches that I put in with the 4D grid. Okay, so I got 80 grid on this pneumatic and I've
inflated the drum to where there's pretty good squish in it because I want to kind of conform
around my limb. And I'm going to be pretty aggressive on it because I still want to
reduce the weight pretty significantly. So I'm not going to worry about that. Same thing with
this though. I've got to be super careful because if I were, this thing's spinning at 1,725 RPMs
really fast. So if I was going along here and I catch an edge or catch that cord
or anything, it's going to dig an eighth inch hole, bam, like that. So I have to be pretty
precise. But also if I don't have exactly the same pressure on my hands and on the machine,
I'm going to get ripples in the edge of my limb. We cannot have that. We simply can't,
that's not good enough for my bows. So here we go. Once again, I'm going to count my strokes
and I'm going to do five and six on the top side. Now I'm going to blow this off and we just take a
look at this. I'm going to look at it and I'm going to see if that's even. Does it look even
to me on what I did? Now if I'm looking at this, I can see that I could benefit from just a one
really light stroke on this side. So I'll just do that. It won't affect nothing. Just to clean
that up a little bit more. Okay. That's perfect. Okay. So here we got it. We've got the limb
trapped. It's beautiful. It looks perfectly even on both limbs. The trap is really nice.
When I look down the edge of it, I don't see any ripples or wobbles. It's nice and straight.
So we're going to go ahead and string it and see what kind of results that we have. And then we'll
move to the next step. No birds out there. They're just gone. They're taking the day off.
Get the birds! Get the birds! Whoops, that's not the right string. Not even close. Must have been
this one. Okay. Get the birds! Get the birds! Get the birds! Get the birds! They're making fun of
you. They say you have very dull teeth. You cannot bite hard. They say you can't run fast. I heard
them say that. They said you cannot bite hard. You have to get them. Okay.
Oh, that is so straight. That is so perfect for the lower limb. Oh, the top limb is so perfect
too. Okay. We're still not looking at the tiller because it's the in-stock bow. We don't have to
look at it yet. All right. Where are we at? All right. So we're still at 55 pounds. That's not
going to work. I know there's a lot of guys that like 55 pounds, but it's a very small percentage.
So I can't. This bow will sit on the rack for probably a while. Well, probably not. Being
this is a Houdini, it probably would move fairly fast. It's a hard call. Sometimes I'll just leave
it that heavy. I think I'm, on this particular one, I'm not going to, just so that I can show you
what I would do to bring the weight down for a customer. We're going to go ahead and take it
down because I want to show you how I do that. So here again, because I can just look at it,
the Houdini is really tiller specific. So you have to be careful with a tiller. And if it's
at a tiller, it's going to tell you. For instance, well, it'll go like, it'll go like that pretty
quick if it's at a tiller. But it's not because the carbon doesn't allow that. So I'm still not
going to worry about the tiller, but I want to lose, I could, I could easily lose up to 10 pounds
yet. The weight comes off this thing beautifully. So that's what we're going to do. We're going to
take the weight off of it, get it back down into the mid forties. And it's going to hit a broad
audience of people that want to shoot it. But like I said, I'm sure there's guys out there that want
a 55 pounder. There will be in stock bows coming along that I leave at 55 pounds for you guys.
All turned up, don't I? So to take the weight off, what I'm going to do, we're going to take it off
in this machine. And, and if you know what you're doing, even if you don't know what you're doing,
the weight comes off fast. Probably, probably even faster if you don't know what you're doing.
But we're going to go 120 and 180. The 120 is going to take our weight off right over here.
The 180 is going to clean up the scratches that the 120 put in.
We want these pretty tight. I want this one super tight. And this one here,
I want just a little bit, but I want it, I want it fairly, fairly stiff also. Okay, we're ready.
Now I have taken three strokes on a Houdini. This is a 54 inch. Before and in the past,
I've taken three strokes off of this guy right here on one limb and three strokes off this one,
went and cleaned it up and it lost five pounds. So we're going to take a little bit more than that,
but we're going to be cautious because this thing is a beast. And spinning at 1,725 rpms,
this drum is going, the actual feet per minute, the distance traveled on a larger drum is way more.
I'd have to do the math on that, but it's really going on this side.
So we've got to square up, get it real nice and even before we put any pressure on. So I'm just
going to touch it down and I'm going to look at where it's hitting. And see, I want that,
I want it to be hitting all the way across before I touch down and go. So I'm going to square up
and go. When you're taking weight off like that, you want to go on a brand new spot on the belt.
Now I'm going to go ahead and look at my glass thickness and see how even a job I did.
So that looks really good. So that I'm happy with that. Now we're going to just take the
stratches off. Not near as precise on this one. So we're just going to do five strokes
and that'll get deep enough to remove the 120 stratches. If we didn't do that,
we would absolutely be caught spending a lot of time sanding by hand to get those scratches out.
It up now, remember it was 55 pounds. So with five strokes on the 120 on each limb,
let's see what it took off. I'm going to guess this is just a ballpark, but I'm going to guess
it's sitting around 48 pounds right now. Once again, I'll look at it. The tiller is still
really good. Nothing to worry about. That tells me I had the exact, almost exact same pressure
on both drums. Well, I was close, 47 pounds. So I'm really happy with that.
And I'm going to leave it 47 pounds. It's a really good weight. So we're going to address
the tiller now. Now it's time for the tiller on a stock bow. So we'll go ahead and we'll mark up
from the tips, making sure we're really close to the fade out of the riser, but not on the fade
out. And we want to be at exactly the same point. Now it's critical to be the exact same place on
the pull point of the bow. I know that my tips are exactly one inch down. I don't have to measure,
but if I was doing a rework or something and the tip length was different beyond the string,
then I would have to measure from where the string attaches from the pull point.
But because I know it's the same on my particular bow, I can just hook it on the end of the limb
and we can go from there. So we're going to measure up the tilt. The Houdini requires an
eighth-inch tiller. So all right. So we have a quarter-inch tiller. So we're super, super
close and I knew we were, so we're a quarter-inch positive. So we're just an eighth at a tiller.
So what we need to do is we need to weaken that lower limb and it's not going to take much.
So we're just going to touch it on the 180 grit here and go ahead and weaken that lower limb.
Um, but look at that gorgeous, gorgeous black and white ebony, how the grain is on top of
itself overlapping.
Look at that, one, two, and that's all I'm going to do.
Now I'm going to check it, seven and a sixteenth, okay, that's perfect, dead on an eighth of
an inch.
It doesn't take much.
So now we have a perfectly tuned, fifty-four inch black and white ebony Houdini, but we
have one more step, and that is I shoot every single one of my bows, whether it be a rework
or a brand new bow, because if there's something that's going to happen in the bowyer's world,
in the bowyer's shop, it's going to happen when you shoot it.
Well, not necessarily.
If you string it the first time, it definitely could happen then, but when you put the force
of a true shot on it, that's when you really know if everything is correct.
So let me grab my arrows, and I'll meet you over there and we'll see what this thing does.
Here we are, we're going to shoot this, and the fifty-four inch Houdini, it likes a brace
height of eight to eight and a half inches, just gets that string up off the limb.
Any hybrid longbow, you'll benefit from a little higher brace because you just, you
get that string up off the limb a little bit.
So, we've got a mix of arrows here, some really bad, some great.
So there's a Carbon Express Legacy, really good arrow, and let's see what she does.
I don't know where the doggo went, but it'll be okay because, yeah, feels good.
That's nice.
That is nice.
That's good.
So, I'm kind of aiming at the can, but I'm not hitting the can.
You can see here, I've been aiming at the can, but I don't have my aim dialed in on
this particular bow.
So, you can see that's a tight group over there, but it's down and to the right.
So that tells me it's pretty consistent.
There we go.
That was right in there, right to the left of the can there.
That was a bad shot, but that was a really heavy arrow.
So, that's the thing with this whole variety here.
There's so many different weights and spines.
The thing about the Houdini, it is able to shoot a huge variety of spines successfully,
and that's not my own feedback.
That is what my customers are telling me.
Guys are calling me and telling me and texting me and saying, hey, these things will shoot
almost any spine successfully, which I haven't quite figured out why it can do that yet,
but it is able to do that successfully.
So, oh man, bullseye, wow.
So this little baby here is a shooting machine.
Very, very happy with it.
I'm going to show you after this shot, one thing I look for on a tuned bow after it's
tuned.
Okay, no, that's not it.
We're not going to end on that one because I don't like that shot.
That's not a good shot.
Let me get one more shot and see if we can get closer to the can.
That's pretty good, but now I want to get another one.
These are Chinese arrows.
They are junk.
They come with the PMZ longbows that Nick works on, but let's see how close we can get
with this guy.
Almost perfectly dead center where I was aiming.
Okay, that's good.
This thing shoots beautiful.
But what I wanted to show you here, when I tune a longbow, after you tune it and you
know it's straight because you tuned it, you don't necessarily have to look down.
All you got to do is just look at the tip and you see where that string is right there.
If it's centered between here, just looking at it after you shoot it, that limb is straight.
It's going to be perfectly straight.
So I can look at that one and it's perfectly centered.
Let's look at this one.
Same thing.
I can look right here and just center that after you shoot it because the shot tells
the real story.
Everything settles in.
So I can look at that and it's perfectly straight.
So really happy with this bow.
It tuned out perfect.
Now it's going to lose one pound when I edge stand it for final finish.
So you're looking at a 46 pound black and white ebony Houdini that will be available
here.
There it is.
Thank you so much for watching.
That's a complete, all my steps, my process of tuning the new hybrid 54 inch black and
white ebony Houdini.
Thanks for watching.
