Installing floor sealer to a stone floor: with a "roller"

VideoJoeKnows
63 followers
1 Video View·Jun 1, 2026
http://www.VideoJoeKnows.com Installing floor sealer to stone floor, with a paint roller, is the way to go. "Joe" uses a "roller" when he installs his sealer, to stone floors, all day long. The sealer directions say you can install sealer, to a stone floor, by using a paint roller, paint brush, or a sponge, but "joe" finds that a roller works the best, when installing floor sealer to a stone floor. "Joe" still uses a paint brush to "cut in" around the edges but for sealing the rest of the stone floors, "joe" uses a paint roller. Watch as "joe" shows you how to use a paint roller while installing sealer to your stone floors.
http://www.VideoJoeKnows.com
AI Generated·May contain errors
Okay, and I just want you to dip that in there. This is our sponge roller
See why I like to use the smaller one. I'll get into the nooks and crannies easier. I
Just want to put a little bit on there
I'm just going to sponge it on
I'm going to force a little pressure on there. I can add a little more and
You'll see what's going to happen here. It starts foaming up. I
Want to make sure I'm just going to do this little section for right now
That's foaming up, but the harder you push more foam comes out
That's all right. I'm getting a good coverage over the tiles. I want to make sure I get the lines here
And everything now, I'm going to go back over
these areas
Lighter with my roller. Okay, and that takes up and and also
floats out
the foam
in other areas
And gets it all in there. Now if you want
After you do that, take your brush
Reach in there. Just go over each one
like that
before moving on to the next tiles
Like I say just keep track of where you've been and where you haven't been
So you can put on some more. I
try to concentrate on
a tile at a time
You know or a tile and a half what wherever you're at
Try to have it try to have a nice sequence
And see along the base where I did it with the brush. I
Want to go over plenty
So I don't have a question of whether or not it was hit because some of that could have already been dry
Okay
So just make sure
Jeez
Just make sure you get a system
Just go around each tile make sure I get everything all in there the nooks and crannies and get a full
Coverage
kind of what I
Like to go back with the paintbrush
So I've saturated this entire area
when I know I'm getting all in the nooks and crannies and
Also in the grooves
That's about as far as I want to go so that I can reach in there with my paintbrush
Now, let's say you didn't want to do that. Okay now I'm going back over. I'm just doing it very lightly
Just do it lightly
Kind of get rid of most of that
Overage see
Pretty much disappearing I
Could probably live with that
but
You know, you can live with it if you can live with that like that. It's probably fine
I'm just gonna finish it off
Now I did it that way this this doesn't take as long either
see I can just
Quickly go over it
Make sure my grooves have been covered
there
like that
That should go a little bit quicker
Just like I say going to sequence I went out to an edge of the tile that way I know the next part I start
I don't have to really go over that that far
Okay
easy breezy
I'm really pleased with how this looks so far
That's my first coat I'm gonna let that dry while I'm letting that dry
I've got a bathroom floor and a shower stall to do
so I'm gonna go in there and start working on that by the time I get that done I can come right back on here and
Put the second coat on because this will be dry by then
