Installing Toilet Fill Valve Made Easy

VideoJoeKnows
63 followers
2 Video Views·May 24, 2026
Installing toilet fill valve made easy is what this DIY howto video is about. VideoJoe is right in the middle of installing a new Fluidmaster toilet fill valve & he want sot show you what he will be doing next in order to have the toilet fill valve installed properly. How long does it take to install a new toilet fill valve from scratch? Maybe an hour or less but take your time & do it right even if it takes you more than an hour of your time to remove an old toilet fill valve & install a new toilet fill valve. I know you can do it! Watch & learn as VideoJoeShows you what VideoJoeKnows...installing toilet fill valve made easy. Nice!
Okay, ready for the next step.
Now, I gotta put this on here.
And actually, I think before, let's see.
Yeah, before I do that,
I'm gonna put my rubber tube on that.
And I like to put a little water in there
or some spit or something,
just to make this tube easier to put on here.
And, you know, I could've put that on first
before I put this in the tank, right?
But there it is, okay?
Now, I've gotta look at this and see.
You see how this rod is here?
Well, that's where the water's gonna shoot down
into the tank, but I want it down into that hole.
So I have to kinda put this in such a fashion
where it's not gonna be in the way
of my metal toilet handle.
And so that is gonna shoot in there.
See, I think, yeah, if I put it over here,
then the water's not shooting down this hole.
I like to have it shooting down in the hole, okay?
And there, okay, like that.
See, all right, just like that.
And I could position this, I could position it over there.
I could swivel it over here.
You know, I could swivel it further off that way,
however I want, you know,
as long as it's not hitting that.
I think that's fine there, don't you?
I think that's good.
Man, that's pretty close, but you know,
that's just how it is.
And now I'm gonna kinda mimic this.
I'm gonna kinda hold it up about how I think
so that this pipe is long enough, but short enough
so it's not gonna hit the top of the tank lid, okay?
And what I could do is I could cut it long if I wanted.
Let's just cut it a little long, okay?
I think it should be about there,
but I'm gonna cut a little long.
I just have some electrical cutters for wire, okay?
And I'm gonna kinda hold it down at an angle
where I think it could go, okay?
Am I out of the way far enough?
I think I am.
And see, I think that's fine.
I don't think I'm gonna cut it any shorter,
but if you were to cut it shorter, it would fit.
See, it'll fit all the way down to there.
I could cut a lot more off.
In fact, let's just cut off,
just for the sake of argument, just a little more.
I'm trying to do it without it going down in the toilet
or pinching my fingers or anything.
Now I've gotta push that in there.
And if it doesn't go, you can wet it,
or we can take this off, right?
Take this off, take that off, and we can put that on
and just walk it back and forth, back and forth,
back and forth, back and forth, like that.
I used to twist it, but I found walking it back and forth
works just as well, if not easier.
Okay, now, let's see where the thing is.
Oh, there it is.
You just have to have to kind of look at it
and hold your mouth just right to get it going in there.
You see, like that.
And we'll just, and we'll kind of look at that.
That looks fine.
The water's gonna shoot in there, okay?
I think we're done with all that.
Are we ready to turn the water on?
Hope your answer's yes.
