Condo home renovation ideas made easy Part 79 is what this DIY howto video is about. VideoJoe is getting ready to do some Condo renovation work at the Condo & he wants you to see what he will be talking about & showing you giving YOU ideas for what you can do around your place too. In this video you will see a few different things hat VideoJoe was & is installing in the condo & I say these are some good ideas too. Everything VideoJoe will be showing you are things you can do on your own so you can save more of that hard earned money of yours! Watch & learn as VideoJoeShows you what VideoJoeKnows...condo home renovation ideas made easy Part 79. Nice!
AI Generated·May contain errors
Video Summary
AI Generated
The speaker provides a detailed guide on two home improvement projects: installing heavy-duty wire shelving in a small under-stair closet and upgrading condo track lighting. He emphasizes the importance of material quality, structural integrity, and thoughtful design to maximize functionality and aesthetic appeal while saving on professional labor costs.
Well, what is our project today? Well, it doesn't really have anything to do
with this garage door, but if you want to ever think about putting insulation
on your garage door, you might want to check out one of the previous videos I made.
Yeah, but that's not what this video is about. What is it about anyway, Joe?
Well, I'm going to use some of this stuff here, and I've got some closet shelves. These aren't
any particular closet shelves, the standard closet shelves. I'll show you in a minute.
I'm going to make a pantry, pantry shelves out of this, out of this. Have you ever seen this
for pantry shelves, you know, for food and stuff like that in a hallway closet or anything like
that? I've only ever seen these installed in closets. Well, today I'm going to be doing
something a little bit different. I'll show you here what I'm, what I'm up to here. Let's see
here in the little condo still, and here's the, here's the little closet underneath the stairs.
See there? Look, it goes up at an angle, goes on down that way, and that's where I want to
put the shelves. Boom, boom, boom, boom, boom. I want to put like five shelves in there, so obviously
each shelf's got to be cut, and I got to be careful. There's a fire sprinkler up in there
and stuff, and I want to, I want to make the shelves kind of like the pantry shelves. Here,
this is our only pantry in this little condo. Kaboom, and see there's five shelves in here. One,
two, three, four, five. Okay, I'm going to kind of mimic the height of all those, and this is just
particle board shelving that was painted, and initially I was thinking about
putting wood shelves in here, but I'd have to, I'd have to build cleats in here. I'd still have to
figure out how to support it, and I, and I was thinking, you know, I could have, I could have
supported it just the same way I'm doing now with these types of supports. I could put those
types of supports up there, and then put the shelf brackets like this, and then, and then put the,
put the melamine shelving on top of that. I thought, do I want to do that, and then I,
I ultimately decided against that. I was gonna, I was gonna screw the shelves up to there. There's
one, there's one hole right there, but then I've got all this other stuff that's gonna,
that's gonna show to a certain extent, so I thought I would do this type of shelf. Okay,
so that's my, that's my project today. If you want to check that out, stick around.
Now remember I told you these were not any old standard closet shelving. Now regular closet
shelving, these support, these little pieces are further apart than this. See this? These are only
about, oh I don't know, half, maybe half inch, five-eighths of an inch apart. Okay, and this,
this shelf here is called a heavy duty shelf, not a standard shelf, and of course they sell these.
These are heavy duty brackets because the regular standard duty ones aren't as wide as this,
and that gives it a little bit more strength apparently. And then the shelf brackets,
these are, these are actually heavy duty shelf brackets too. The standard shelf brackets are
built slightly different. You go to the store, check it out, that doesn't have this, it doesn't
have this little notch where I think the shelf is, is going to fit, it's going to fit up in there
like that, and the other ones just go straight out from underneath. So they're slight, slightly
different things, and I thought, I thought since I'm going to make these for, for pantry shelves
where you're going to have food on it, you're going to have all kinds of other stuff on there
that's going to make it heavy. Maybe you're going to have a mixing container there, and a, a blender,
and who knows what all kinds of stuff you're going to have up there, a sack of potatoes,
who knows, well the potatoes you probably put down on the ground, huh? But in any case, I thought
I'll do the extra duty shelving brackets, and the shelves, and the shelving
support brackets here, and that, that's making the cost of this whole little project a little bit more
than had I used the standard shelves. Well, if I were to use the standard shelves,
then these shelf supports going across this way would be further apart, and then if you,
if you want to stack some food jars or something like that on there, they might have a tendency
to want to teeter-totter on you, and plus they're not going to be as strong. I think this metal is
probably just a hair thicker too than the other to give it a little bit more strength, and I
thought, I also thought to give it even more strength, I want to hit, I want to hit the studs,
I want to hit the studs, and every 16 inches I should be able to hit a stud, so that means I'm
going to have a support every 16 inches. I mean, jeez, I could have put these supports every two
feet or so, but then I would have had to put plastic anchors in the wall and screws like that.
I, I want to use longer screws, and I want to actually get it into the, the studs. That's going
to help hold the whole weight of this whole thing, and I, and, and you know, if the, if the, if the
studs in the wall are every 16 inches, depending where it starts out, and then 16, 16, 16, whatever,
I didn't want to skip one, because then that, that would be 32 inches in between shelf brackets,
and you know, this would probably span that, but once you get food on there and stuff, it could
have a slight tendency to bow, and I thought, hey, you know, it's just one little shelving area. I
think it, I think it's going to go good this way, and I'm going to just beef it up, so I'm going to
put the supports every 16 inches, and that's, that's going to be plenty. Now at the store,
they also had some plastic runner that you could put on top of, on top of this after you get this
installed. It was the same width as this, you know, for pantries and stuff, and I opted not to do that.
One little row was like, I don't, I forget what it was, six or seven dollars, and it wasn't even going
to cover one shelf. Might have been, it might have been 14 or 15 dollars, and I thought, no, I don't
really need that. This is going to be fine. There's plenty of bracket, you know, wired pieces here,
and I think it's going to be fine. Worst case scenario, later on down the road, I could always
add that stuff on onto here, and it's plastic, and it kind of fits on heavy, you know, really
heavy plastic, so you can, so you can install it right over the top of these metal shelves. Yeah,
they had that at the store too, and the thing I was bummed about at the store, they only gave me
two different, two different sizes. I think that was six foot, and this was four foot, and some
shelves are going to be over eight feet long, and I thought, man, I wish they had this in eight foot
lengths, but they didn't. They had just the standard shelving in eight foot lengths, and so some of
these shelves, I'm going to have to join together and stuff, and you know, I'll show you different
things, what I'm going to do along the way, because here's, here's the other thing too. These, these
vertical supports didn't have that many screws in them either, as I was seeing in some other ones,
yet, you know, one, two, three, four screws. I guess, I guess that's all right, four screws for each one,
and the screws that I got, you know, sometimes at the store, they don't have what you need. Now see
here, they have some, some flat, like a flat head, and these were called sheet metal screws, but they
were only two inches long. I thought that should be good enough. I really need like two and a half,
because by the time you go through three quarters of an inch of metal, and then you're five, half
inch sheet rock on the wall, that's an inch and a quarter. These are only going in three quarters
of an inch, so, so I don't, I don't really think I'm going to use these. I ended up getting some other
screws, and these were two and a half, see, two and a half inch screws, but they didn't have a flat.
These are, these are called flat head. They didn't have the other type of head, so, so see, these are,
these are concave, and what's going to happen is, if this hole, if this hole is not big enough,
lots of this head is going to stick out, so I may, I may make these holes just a hair bigger,
so that when I install this, I still have some of the head showing, but maybe it'll still look just
like a flat, you know, a flat head without sticking out of the wall, and yeah, sometimes you just have
to get what you can get at the store, you know what I mean, and so, so these, man, again, I wish they had,
they had the two and a halves. I found some other ones. They were three inches long, and I don't
really need three inch, and, and they were, they were twice as expensive as the two inch.
They were like 13, 13, 14 dollars per little container like this, and these, these are like five,
five bucks. I think this was six, maybe six dollars, because these are a little bit longer,
and with the 50 count, they have, they have a little bit more metal to make all these
in a two and a half inch, so see, sometimes if you get a 50 pack, it's going to be more,
but if you get a smaller pack, it might be the same price as your, as your other ones. That's how
you do it in little plastic, you know, plastic bag containers. Maybe you get five or six screws,
and then other times you'll get four screws, but it's the same cost. You see what I'm saying,
but in any case, hey, I'm going to go in there and start measuring in a minute. Now see,
I've got my sawzall, and I've got some metal cutting blades in here to cut, to cut these
shelves, to cut these shelves off wherever I need to cut them off, and if you don't have that,
if you've got a hacksaw, I may end up using this hacksaw too. I'm not quite sure if I'm going to
use that hacksaw or not, but I'll show you if you want to get a good hacksaw. That's probably
the best one you can get, this one right here, because you, you tighten it, you tighten it with
this, with this right here, and then that, that, that pushes up, and I'm not sure if you can extend
this further than 12 inches or not, and then you can pull this out here, and you can store different
extra blades in there, and then if you want to use a saw, this one here came with the,
with this as a bonus. See how it comes out with one blade like that? You can use that
handle. Well, if you didn't have that, and you had a blade in the, in the top of this,
you can pop out this here, and this screw right here clamps down on your blade, so you could
extend your blade. If you wanted your blade to come out this far, you could extend it that far,
and then, and then tighten it down right there, and you can use this as a little saw
that way, or you, you just
loosen that up a little bit more, and then you can store your blades in there, and just clamp
that down, that way you don't hear them and stuff, and then you've got extra blades in there.
An important thing on your, on your, your hacksaw, when you get hacksaws at the store, did you know
not all of them are created equal? You've got to measure the length of your hacksaw blade. If you
don't, you might get the wrong ones, because this one is 12 inches long. I measured it before I went
to the store, because I wanted to get some extra blades, and I wanted to get the 12 inch, because
they also sell these in 10 inch. See, this one's 12 inches long, and I like to use the 32 teeth,
and see, 32 teeth per inch is what that is. This one, it just happens to say it's three times
sharper, lasts 15 times longer than DeWalt, and you know, they have these 24 teeth per inch, 18,
or 20, 20 per inch, but the more teeth you have, the longer this can stay sharp, and the easier it
is, believe it or not, to cut most metals with more teeth. Okay, so I got those. It didn't really cost
me that much more than the other. Okay, so yeah, I'll show you a few tips along the way, and we'll get
going here in a minute. I think I told you wrong, too. Remember I told you that it would probably
cost you, oh, maybe $300 to have somebody install this for you, and I had to cut a lot of stuff,
and there was a lot that had to be done, hitting all the studs, cutting stuff, putting things
together, and all that kind of stuff, and you know, it took me at least eight hours
to install this, and then it took about a half hour to make a material list. It took me an hour
and a half or more, a couple hours, to pick up the materials at the store and see what kind of stuff
they had, see what pieces, and all that kind of stuff, and now I've got to take back the extra, so I've
got over 10 hours into this labor-wise, and have you checked contractor prices lately or handyman
prices lately? You're going to pay, oh, probably, I'm guessing most handymen are $45, $50 an hour
nowadays, you know, unless you're lucky enough to find one for $25 an hour. I kind of doubt you're
going to find anybody for $25 an hour, $50 an hour, and I've got over 10 hours. That's like $500
for labor to install this? Are you joking me? Well, you just check out prices
next time you need something done around your house, and think about the savings you can get
if you do it yourself. Merry Christmas to you, Merry Christmas to you, Merry, Merry Christmas
to you, Merry Christmas to you. Oh, look what Santa brought us. Oh, hey, Pippas. Well, she didn't really
come this Christmas. She's been around for a while, but hey, that's not what I wanted to show you.
What did I want to show you, as a matter of fact? Yes, I got my nail bag on. Yes, I'm ready to work.
Got my knee pad out. Got some other stuff here, and what do you suppose we're going to do here? Look at
this, a directional track fixture. This is something different than a track light. You see this here?
This is like a track light. It's got a head on there that you can swivel into place, but it goes
right over the box, so there's no track light needed, and that's what I kind of wanted to do
here. As you know, we're still at the condo. I'm still making how-to videos for my video series
for the condo, and in this area right there and right there, okay, there used to be a track light
there. A little square box was right there, and the track went out this way, and then there was
one little swivel head on there, and it was the same type of deal over there, okay, but after I
took them down, I thought, oh, we'll put them back up, and then afterwards, I thought, well, what could
we do something slightly different, and we were sitting back trying to decide what to do with that,
and we were thinking, at first, we were thinking maybe hanging some pendant lights like a cobalt
blue or something like that because we found this, and we hung this in the window. This was just a
regular window, and this was a stained glass thing of a peacock. Isn't that kind of cool?
And then we tied that up to the header using just some wire and some of those swag hooks
for the top, and so we thought, how else could we bring some more blue in here?
And I thought, okay, that might be kind of nice, but the only problem with that is we watch the
TV right here. Here's where we've got the couch and stuff. Do we really want a pendant light
turned on at night while we're watching TV over here, have this light kind of come down on you,
have the light kind of come down? It's almost in line with the TV. See where the edge of the TV is?
Look, and so if the pendant light was there, are we ever going to turn that on? Probably never turn
the pendant light on. If we had something like that, maybe it's just something there for looks,
we never turn it on. Now here's the switch for that, the paddle switch, and
what we decided to do was put these, instead of doing regular track lights, just doing something
like this, and you know, they're just white and stuff, and I kind of wanted them to kind of blend
up into the ceiling, and you know, when you come into the condo, it's not going to be overpowering
or anything, it's just safe, it's just there, and so on those, I'm going to decide later on,
and I'll make a video of it too, I'm going to take this paddle switch out, and I'll probably
put a dimmer light switch in there for these, and I'm not even quite sure if these lights will dim.
Nowadays everything is LED, see this LED, and I was also looking to see if this came with the bulb,
and see right here, you always got to look at stuff, see here, no bulbs required, that means
the bulb that comes with it, or I don't even know if there's a bulb, it might be a self-contained
thing, and a little down along the edges, that might be where the light is, I'm not quite sure,
okay, but I have a feeling I can dim it. Now sometimes it'll say on here, if I wanted to
read this enough, it'll probably say whether or not it's dimmable or not, look at the light,
it says manufactured free, light shines brighter, and lasts up to 46 years, are you kidding me?
No bulbs required, oh look at that, right there, dimmable, now sometimes you've got to look at
light fixtures, because some LEDs you can dim, some other ones you cannot dim, believe it or not,
okay, so I think I'm set, I think I'm set to put those two up there, I don't think it's gonna,
it's gonna look that bad, it's not gonna be overbearing, and see, I'm not even quite sure
why they put track lights there, other than the fact that this one, you can kind of shine it over,
kind of towards the corner, granted we can't really put a picture there, Momi bought this
on our travels, she liked that, and she's from Hawaii, and her son said, hey mom, that kind of
looks like you, and that's a queen, I forget her name, and anyway, she decided she wanted to hang
it there, so wasn't that, isn't that going to be perfect for this, for this light, to angle down
on it, and then if I don't want it as bright, then I can dim it, and that's why I want to put the
dimmable light dimmer switch in right over there, okay, so if you want to watch that,
that's going to be my project coming up, okay, how does that look, nice, huh, now I got to clean up
all my mess and stuff, and those little nuts up there, I tried to, I tried to tighten them just
hand tight, you know, but they, they can be tightened a little bit more, I'm going to take a,
I took a little crescent wrench and just snugged them up, just a hair, and I'm going to have to
do the same thing to that one before I get done, so now I can pull this out, I can clean all this
stuff up, I'm going to keep the mounting screws that I had extras, I've got four mounting screws
here that wouldn't work, but I'll save them for next time, keep the directions, and it has a phone
number on there in case these lights ever burned out, now if you weren't with me at the very first
of this video, I showed you those were, those were LED lights, and most days now everything's
gone to LED, see it says no, no bulbs required, lots of times you get a light fixture like this,
and then you'd have to go buy bulbs for it too, no bulbs required, and it's dimmable,
and I think this one is going to last, oh I forget how long, oh it says five year
limited warranty, but I read on here somewhere where it's supposed to last 40,
47 years or something, some ridiculous amount, it'd last up to 46 years, can you believe that?
Chances are that's never going to burn out, but if I hit it, or if the electricity goes out,
or something, or if a circuit snaps, or who knows what, if that ever burns out,
I don't want to have to buy another one, I can just call the manufacturer, save your receipt,
and everything like that, and you might have to take the SKU, take a picture of the SKU number,
put it on your computer, all that kind of stuff, if you don't want to save the box,
save your receipt and stuff, and I don't know if they're going to need all that,
if you just call them, and you send them a picture of the light fixture that's installed,
there's a number on here, so that's why I'm going to save that, okay, then chances are they'll give
you, they'll either send you a whole new one, or I'm not quite sure how those bulbs unscrew,
I'm not even going to touch them, I'm not going to mess with it, it might unscrew and pull out,
and then a little clip in there, or a prong, who knows, I wasn't even going to mess with those,
right, because they say they're supposed to last 46 years, but on the off chance they don't,
then you'll be prepared, okay, so that's pretty close to the center of there, and this is,
you know, it's just giving some light there, and like I say, once I get a standard
dimmable light switch, and I'll take a look at the existing ones, I want to get this very same
kind, if I can, with the fat paddle here, and the little paddle on the bottom for on off, this
this happens, this happens to be where the light's up here, and those were leds I installed, and
and they were dimmable, look at that, and yeah, I got a three-way dimmer switch that was
three-way, you can, you generally hook those up for single, single pull, or for three-way,
years ago they used to have them where you had to buy one that said three-way, you had to buy
one that said just a regular standard single pull dimmable, but now most of them will do either or,
depending how you hook it up, okay, so I'm going to have to get a dimmable switch, and it's white,
I'll take a picture of this, so that when I go to the store, I try to match up, I don't like to just
go to the store and get, what's the difference, well they got four or five different kinds of
dimmable ones, they got one where you turn on off here, and you have a little slide over here,
or maybe it's just this, and not the paddle at the bottom, you push this all the way down,
and it clicks off, and then you push it up, and it's on, you think what's the difference, well
not much, other than I like to match existing conditions, that way it'll look like I was never
there, and so when I get a dimmable light switch, and I'll make a video of that, and worst case
scenario, if you can't find the very same dimmable style light switch, what could you do, if you got
two fairly close to each other, you could you could take one up in your bathroom, way on the
other side of the house, you can take that one out, if it's, if you have a dimmable switch in
there, or in the closet, or wherever you can find one, maybe take that one, put it down here so it
matches, right, and then you can get a different one that doesn't match, and it's all by itself
somewhere else in your condo, in your house, okay, and that's all I have to say about that,
that's all I got for this time, but I'll be back with more videos, well I'm glad that project's
done, that's not done until I get the dimmer, and then once I get the dimmer and install the dimmer,
then when it's really pitch black outside, I'll put the dimmers on, and then I'll have Momi
will dim it, and we'll see, because this light, when you dim it, maybe there's more light that's
on the bottom instead of the top, or instead of the center, and then it might make a difference
where that is, okay, so that's a good way to do it before you call it good, all right, see you next
time.