http://www.VideoJoeKnows.com Mounting a tv to a wall bracket: measure twice....bolt once, for the proper height you were wanting. It's easy to make a mistake on the mounting height of your tv, if you don't measure properly. Look at the tv wall mounting bracket directions, to see exactly how the bracket assembly will be mounted to the backside of the tv. Then you will be able to determine the exact height to mount the tv to the wall, on the mounting bracket. You may not like to read directions but it's important that you do.....don't worry...."joe" won't tell anyone. Measure twice & bolt once, when mounting a tv to a wall bracket. http://www.VideoJoeKnows.com
AI Generated·May contain errors
Video Summary
AI Generated
This guide explains how to properly measure and install a TV wall bracket. The speaker emphasizes the importance of reading instructions and calculating the exact distance between the desired TV height and the actual bracket position to avoid installation errors.
Just so you know, I mean each TV bracket assembly is different. You've got to get
the bracket assembly directions out. This one had two different bracket assemblies to put back here
because it's modified to accept pretty much any TV. The whole pattern may not be the same
for your TV, so you may not need this bracket. You may have a different bracket, but they're
pretty much universal. Okay, so I don't want you to think this was just something I kind of
threw together because I did a little bit of planning on this, and I kind of pulled out
everything, and I have not installed this type of bracket assembly before. That's why I'm going
and reading the directions like I should. Don't think you can figure it out without going through
the directions, okay? And that way I can see where everything's at and all that, okay? You can do it.
So like I say, spend some time on this. Read your directions. Make sure your bracket assembly
is going up right and that you understand everything how it works before figuring out
what to do next. Because see, once this bracket is on here, I get it hooked on,
and I figure out which way it goes and lift it up and all that. I know that's right,
and that's the bottom. Remember I wanted five feet, two inches to the bottom edge of the TV,
so I know this is the bottom. I know this is up tight, so I've got to measure five feet,
two inches from this edge. Then I have to measure up to the bottom of this bracket that's going to
be bolted to the wall. So the easiest way to do it is just hold your tape out. I've got five feet,
two inches right to this edge where this the bottom edge is, and then I can look up here to
the edge of the bottom of this bracket assembly, okay? I've got 69 and three-eighths, so I know
this is where the bottom of the bracket has to be bolted up to the wall, right?
Then that will allow this room here. I couldn't just bolt that at five foot two and say, okay,
that's fine. Put the TV up there. Uh-oh, you forgot about that. Uh-oh, you measured from the
top down, and you thought that was the bottom of the TV, so you measured five feet, two from here
to there, and now you're wrong. So see, that's why you just spend a little bit of time, get your
bearings, understand your project before you start bolting anything up to the wall and making holes
because you want to do this right the first time, okay? So things along the way, you've got to
remember these measurements. Write them down, you know, 69 and three-eighths to the bottom of there,
and we've got to figure out where the center was. We marked over three and three-quarters,
and so this is the same type of processes you're going to have to go through for your TV. Don't
remember my exact measurements because your TV is going to be different, but follow the steps and
you'll do it.