In this episode of Administrative Results we revisit the the shotty science methods and pit AR500 Steel Armor against Level 4 Ceramic Armor. AR500 reached out and sent me the curved plate with the extra spall protection to help with the frag damage. The the level 4 ceramic body armor was of my personal collection.
00:00 Mind Blowing Intro 01:04 do your part 01:20 thanks SDI 01:50 the science test 03:54 Guns for test 04:11 shooting steel plate 08:33 Arm Poster enjoyer 08:50 ceramic testing 10:53 the results
All magazines used are less than 29 rounds.
AI Generated·May contain errors
Video Summary
AI Generated
This video compares the effectiveness of steel and ceramic armor plates using a ballistic dummy. While steel is more durable against repeated hits, it produces dangerous spall (fragmentation) that can injure the wearer. Ceramic plates offer superior fragmentation control but degrade structurally under heavy fire. Ultimately, ceramic is recommended for real-world use due to its safety profile.
I got it. Gentlemen, has science gone too far? Yet again, welcome back to the channel. I'm your
host. It's Hawking Baklava. Today we are testing, once again, armor. We're doing a little steel
plate action. If you recall on the channel I've done, will steel armor get you killed? Yes,
no, maybe. And the results were kind of exactly what I expected. Got some frag to the face,
but surprisingly, the steel plate stopped everything. Now, so here's a little story for
you. I got doxed by AR500. So when I bought the original piece of steel, they reached out. I
bought it as my personal self, not as my YouTube online persona. And they found that email and they
caught me. They're like, hey, you want some more? And I was like, perhaps. And so they found me. So
I guess why the point of this balaclava anymore? All right. So they sent me some more armor. They
sent me a curved steel plate with a even bigger buildup of like the truck spall liner. It looks
exactly like the spall liner on my truck. So very cool. Thank you, AR500. Gentlemen, I know
you're on the toilet. I know you're watching this, taking a dump, eating your coffee, drinking your
beer, yadda, yadda, yadda. What's most important is that you like and subscribe. Leave a comment
in the comment section down below. Your comments are a sacrifice to the algorithm god, a god of
which who I love greatly. I love to read those comments. So get down there. Gentlemen, if you
like working on firearms and not human skulls, then Sonoran Desert Institute is going to be for
you. Get a degree in gunsmithing. Break into the firearms industry. Help out monkeys such as myself
who aren't that good at working on guns, but are good at banging skulls.
And maybe you can help out someone in need such as myself. So go down and follow the link below.
Check out the Sonoran Desert Institute. Well, what we're going to do, I have essentially a
little smorgasbord of guns. The plan is we'll do a little speed run through them. And then I also
have some level four ceramic plates rated for 30-06 black tip. Faced my first hiccup when the
gel heads got delivered because they were delivered to me in 110 heat. And I'm not sure if
you are familiar with what happens to human-like stuff in that kind of temperature. They essentially
melt. So to add to the nightmare fuel of the gel head, the entirety of the face melted off the
front and it grew mold on my gel dummy. Murphy's law got kicked into full effect. And I was like,
what do I do? Where's all my face skin? And to add even more than nightmare fuel,
we're just going to put the head onto the dummy backwards. Let's jump into it.
I know you guys all remember Dale the dummy. He's our local white supreme.
Dale, you can't do that. This is YouTube. They're going to demonetize me. What are you doing, man?
All right. Thank you, Crossfire. Cool hat. Get out of here. All right. Now we have our dum-dum.
Let's see if we can't fit this in here. The biggest challenge I had in the last...
It's just so terrifying. The biggest challenge I had in the last video was probably getting the
head to stay on. So I invested in more duct tape that we're going to put on here in a second.
The science on this channel is worse than the COVID science, but you got to trust it.
Trust the science. Now there's a lot of strange
copium going on in the comment section on the last video. A lot of you guys saying,
hey, what about this? What about that? What if you wrap the steel plate in duct tape?
Would that help with the spall? What if you had Kevlar liner? Would that help? The duct tape one
is very bubba and redneck, so please don't do that when it comes to life-saving equipment.
Please, for whatever reason, I don't... Why? The Kevlar, I would assume Kevlar would help
with fragmentation. So that's always an option for you. We're going to run the steel armor
through the gambit. We're going to shoot all the rounds first. We'll essentially shoot a few rounds
on the steel plates. Come back, check the damage. Shoot, shoot, shoot. Come back, check the damage.
All right, plate's in there. About up to here, right there. Try and get the head over it.
Kind of cheat like how a normal head would be, right? Not really cheat. That's probably the
wrong term to use for science, but whatever. All right, let's shoot it.
All right, gentlemen, these are the guns we're using for the test. KP9, 9 millimeter. RPK,
7.62 by 39. My American RPK, 20 inch barreled, 5.56. Jim Fuller built AK-74 chambered in 5.45.
Right arm of the free world, FAL, 7.62 by 51. Over under shotgun, double op buck. We're
shooting from about 20 yards. This is to simulate like you turn the alley and there's the bad guy.
Where are you, EOTech optic? There you are. Paid good money for you.
Gave her six just because. Let's let science decide. I feel bad because the gel head is just
so mangled. Welcome to administrative results where we can't do anything right.
Annie Hauser, Bill Nye, the science guy. Bill, Bill, Bill, Bill. Took that steel like a champ.
Looks like I caught them all pretty well or stopped them all, I should say, pretty well.
Don't see any obvious, terrible fragmentation. This is to be expected.
All right, next we're going to do a 20 inch rifle. This is where 5.56 starts to really excel
when you start putting 20 inches onto the gun. I have some 77 grain
OTMs that we're going to shoot the target with. A little extra spicy round for you. No glaring
frag on the backwards head. So looks like it's passing so far. Doing good. Seems like it took
those rounds pretty well. Did a good job. Impressive. Very nice. 7.62 by 39 RPK.
All right. So this is where we start to see this round. Holy crap. So this is where we start to
really see some actual damage to the plate carrier. All right. Definitely already getting
metal coming out. So it's catching it. It's doing a good job of catching it at least,
but it has cracked the plate as you can see. Okay. So there's a small cut on the back of the
head right here. I'm not sure if you guys can see it. We'll have to dissect that later. See
if we see anything come out of it. I can't. I mean, it actually looks, if you get up down in
there, it looks, I don't know if the camera pick it up, but you have to pick it up with a naked
eye maybe. It looks like there's a hole going up into the back of it. So I believe we have our
first hole. There's a hole in the back of the head right here. So I can feel it with my thumb.
All right. We got 5.45. Very common round being used in Eastern Europe. All right. Let's go check
the Spalding damage real quick. That's a lot of damage. Listen, I know my last video, I said
Spalding a lot in place of Spal. Sometimes I just say words, but you got to know what I mean,
not what I say. I was a little unsure of my shots. I was like, I haven't fully zeroed the LPBO on
that 5.45 rifle yet. So it's kind of like when you're this close, are you going to miss? But
you never know. Sometimes you just suck. All right. It seems like it stopped 5.45. No problem.
Not seeing any more fragmentation.
Give it three for fun. My FAL, huh, bro? All righty. 7.62 does not mess around. Definitely
tore up some of that plate carrier. It looks like there's some kind of, oh, no, there's definitely
some Spal. You see that? So it looks like tiny little specks of fragment. And then there's
incision type cuts right there and right here. So definitely catching some more Spal.
It's definitely happening. It's just not as clear and contrasted because my face melted on Dale
over here. I spent a lot of money on these. Definitely stopping any bullets. Nothing coming
on the other side. So as hypothesized so far, we've run the gamut minus the buckshot. Plate
stopped everything. Just minus we have some frag still on our dummy's head.
It's kind of sus. Check it out. A lot of damage to the carrier itself. It's been taking a beating
so far. A bunch of frag coming off the plate carrier from the front. Looks like so. I don't
know if you can see this on the dirt right here, but this is the frag that's like falling out
when I pull the plate out. So it's getting caught between the nylon and the plate.
Plate seems a-okay. Surviving minus the crack from the 7.62x39.
Gentlemen, another sponsor of this particular video is going to be Arms List. For acquiring
your next spicy purchase, go ahead and check out Arms List. We all need a helping hand every once
in a while. And Arms List can get you to where you want to go for fulfilling your inventory's
needs. All right, next up, we got our ceramic armor. This is HICOM level four armor rated for
.6 black tip. It has a shelf life of five years. So the shelf life is pretty much coming to its
expiration date. It said this was essentially manufactured in 2017. Five years later,
here we are. Definitely tearing the plate up off the get-go. Ooh, that's still hot. So you can see
the ceramic on the inside. It caught the bullet. There's asbestos in the ceiling. Maybe I should
wear gloves. Checking the head. No fresh damage that I can see. Seeing no frag yet. Seeing no
damage, no damage to the skull, our moldy skull. Bunch of material coming out. Looks like we got
some damage from the rounds probably impacting. Oh, oh mama. Whoa, whoa. Look at that. So hitting
with the nine mil and then hitting it with that 77 grain out of a 20-inch barrel just absolutely
vibe checked that plate. So I think it's just stacking on where that nine mil was.
Usually the RPK or the 7.62 rounds usually where it's like these things start to meet God. All
right. Interesting. Very interesting. Ceramic definitely stopped the 7.62x39 rounds from
penetrating the plate. I see no additional penetration minus from what we already had.
This is probably only going to get worse from here as the plate keeps going on, but whatever,
let's do it for the sake of entertainment. Did the plate fall out before or after I shot it?
That's a lot of damage. All right. Still looks like it didn't penetrate.
Beaten the ever-living God out of this thing. Neat. Let's do a FAL.
All right. Well, that definitely put the death throws on this thing. That's for sure. All right.
So plate's pretty clapped out now. Impressive. Very nice. Let's talk about it. So I took all
the armor off Dale. He is now naked and afraid. Now we're going to digest what went on. Here is
the steel plate that we shot with a multitude of ammo. Here's our ceramic plate that we shot with
multitude of ammo. Now it looks like the ceramic plate absolutely fell apart, but it did a pretty
decent job considering the test. I'm impressed with how the steel armor essentially stops
everything. It did a good job. Nothing penetrated the steel. It is to be as expected. As you guys
know, I am more a encourager to not rock steel armor. I'd rather rock ceramic. But what went on
the test? Well, in the test, we went down each one of the guns and we fired a multitude of rounds
into the same target. This is like you turn the corner, you got caught by maybe a bunch of guys,
all with guns. I don't know. It's one of those crazy kind of tests and you never know what's
going to happen in real life. But you essentially got lit up by the bad guys. The ceramic armor did
a good job initially of stopping the round, but I think it got very weakened by the nine millimeter
off the get-go. Keep in mind, this armor is five years old. This is fresh steel armor and it has
that Duracoat buildup. What ended up going on? So yes, some rounds went through on the ceramic. That
was after completely kind of giving up the integrity of the armor. These were rated for
30.6 black tip, but what we didn't see is any sort of frag coming off of the actual... We didn't see
any frag hitting the face as what we saw with the steel armor. The steel armor kicked up a bunch
of frag, but nothing really penetrated as crazy as a ceramic armor. So it's kind of like a one
or the other. I personally, I would still rather rock ceramic. You're not going to get as... You're
not going to take as many direct hits, hopefully, as I gave this test. Hopefully, you get like one
hit. You're like, oh no, when you do the whole Call of Duty top off, like you're playing Warzone.
That's how I'm imagining war goes. I could be completely wrong. I don't know. All right, my good
sir. So it looks like we got our hole right here, like a very distinct hole. It's actually kind of
terrifying. Now keep in mind, this style of where the head was isn't going to be like realistic to
where your actual face would have been just due to the fact that there was no gelatin on the face.
I was like, well, I want to have some sort of a gelatin, kind of like where it would catch the
skin. I feel almost like there's like a powdery type burn around it. Am I going crazy? Oh,
it just feels like I'm going to prison for that. I'm trying to see if I can recover any frag. Oh,
I think I see it. Do you see that? Yeah. You see that in there? Well, it looks like we definitely
got some confirmation of steel going into the brain cavity, even though it was on the back of
the head. This is actually pretty nuts. So that was from the steel plate, not from the ceramic.
That's essentially the test in a nutshell. Pretty hard, pretty quick look at science,
fun little example, nothing too crazy. I wanted to streamline this one. I feel like the last one
kind of got bogged down in the mud and I wanted to make this one a little bit more quicker.
So if you enjoyed this video, make sure you like, and subscribe, and comment in the comment
section down below. Your comments are a sacrifice to the algorithm God. And if you want to support
the channel in any way, shape, or form, Patreon is an excellent way to support the channel. We
have a Discord where we talk about girls. I run giveaways, all this fun stuff. What I'll probably
do, maybe even give away this plate or the other plate. Do a little raffle for the Patreon users.
Love those guys. Big thank you to my Patreon. Merchandise, if I haven't said that already.
As always, gentlemen, stay easy, stay breezy. I'll catch you on the flip.
I absolutely took the skin off him. Let's get medieval on this cunt. Props to Ballistic
Dummy Laddies. They make these skulls pretty strong. All right, gentlemen, these are the
guns we're using for the test. All right, gentlemen, these are the guns we're using for
the test.