Learn how to give a clean and classic men's short back and sides haircut using a #3 clipper guard on the back and sides with scissor work on top. This step-by-step tutorial is perfect for beginners, whether you're cutting at home or just starting out as a barber. Simple, clear instructions to help you build confidence and get great results every time.
Paid Links Why I recommend Hims for Mens Hair and Health: 🏠 100% Online:* No in-person doctor visits or pharmacy lines. 🩺 Licensed Providers:* Connect with medical professionals for personalized care. 📦 Discreet Shipping:* Delivered right to your door in plain packaging. 👉 See if Hims is right for you:* https://himsinc.pxf.io/c/7218403/1960...
Join this channel to get access to perks: / @theoneminutebarber
00:00 Introduction 00:12 How to cut mens hair at the sides with clippers 02:14 How to trim round the edges on mens hair 04:14 How to Cut mens hair on top with scissors 08:42 How to blend in mens hair with scissors 14:27 Tip for blowdrying the crown The One Minute Barber explains how to achieve a clean, beginner-friendly look by using a number three guard to blend the back and sides. The tutorial
AI Generated·May contain errors
Are you struggling with complicated haircut tutorials?
Don't worry I've got you covered. In this video
I'm revealing the easiest way to get a clean
professional men's haircut and it's super beginner friendly.
So we're getting rid of the harder numbers and we're going in with an easy
number three on the clipper and this is what we're starting with.
This is quite long so with my number three on I'm going to go in with
the points of the teeth right at the base of the neck and instead of following
the head I'm going to curve up away from the
skull. Okay so we want it to get longer as it
gets towards the top. There's a little ridge there and as I
work my way up the head where the head sticks out the most I'm
just moving up and away from that ridge. I don't want to stop
and just curve out suddenly I'll just carry on
keep the flow going keep moving through the hair.
This is key this is going to take out a lot
of the blending work that you need to do it's going to make your life so much
easier. So points of the teeth in right at the
hairline and as we hit this ridge up and away off that ridge this is the
occipital ridge and this ridge line is caused by
the bone that sticks out at the back the most.
At the sides let's pull the fringe out of the way we want to protect all that
long hair from the clipper work so move that out
of the way and we'll pull the rest down towards the ear.
Now again we're just working up to this line
on the side here we actually call this the parietal
ridge so that's the area it sticks out the most on the side.
Those are the two bones the occipital bone and the parietal bone but it's not
that important what we want to know is where do we glide off the head with the
clipper and these are the ridges it's where the
head sticks out the most. So it's straight up and you can see that
I've not cut into the fringe there because it's
moved out of the way we're only working on the side.
You can see from the back here I'm just gliding up
and away so that's a really good angle you can see how I'm
just moving up and away from the side of the head I'm not rounding over
onto the top of the head. At the sides what we want to do is pull
all the hair onto the face now the points of the comb the ends of
teeth are right on the hairline really close like right
here okay not beyond that or inside
the hairline it's basically right on the hairline okay so you just pull the hair
out there cut along and then you know that no
hair will stick out beyond the hairline so it's not going to
look scruffy. Here I'm lifting the hair up with the
comb and bending the comb out a little bit so
that we kind of graduate up into longer hair.
This hair on the side it's actually sometimes facial hair
so it can be a little bit more wiry and you definitely have to tidy that up.
I'm going to go around the ear but not inside the hairline
it's only the hair that's sticking out outside the hairline
here you can see again just removing that hair
and I'll tease this up with a comb okay and at the back
let's try and make a straight line from the curve of the ear just a straight
line along the hairline okay and this can actually often start
bringing your clipper work together it starts looking quite nice when you do
that. We'll pull this little whorl down this is
where the hair is growing up so I'm going to pull it down
onto the hairline I'm pulling those teeth right to the hairline again
and we'll get rid of the neck hair okay just to the hairline
and tease that hair up a little bit and just neaten up any of these like long
hairs around the edges that's the idea of what I'm trying to do
here the side again same again
neaten up those lines it makes all the difference nice straight line so we've
got a taper at the back and straight lines at the side
very simple you don't need to over egg the pudding here
now we can move on to the top I'm going to apply a little bit of water and we'll
cut this in little comb size segments so look at the width of the comb that
much hair and what we'll do is we'll pull that
follow it with your fingers pin it down and move that hair now get
the teeth right in at the root and we can pick it
up in the fingers there you go so we've got that rectangle
and I'll cut to my client's desired length
now what we need to do is follow that so we cut that little rectangle
let's just work our way forwards doing more rectangles
so width the comb again remember let's move forward a little bit
width the comb follow it with your fingers
pick up and what you'll be able to see is some of the hair from your last
section there it is there so we know that's how
long it was cut to let's cut to the same length and that
keeps it uniform okay so if I comb that forward and I
take another little rectangle on the top lift that up and there's the
short hair again very easy to see and work my way forward
so we're going to work towards the front like this all the way
down to the front now it really helps if you don't have a set
if you have a set of very sharp quality scissors these are six inch and I'll
tell you a little bit more about them later in the video but good scissors
make all the difference so towards the front you can
pull the hair back towards yourself a little bit or you can just lift up to
the same length and keep it a uniform length uniform
meaning just the same so wherever we pick it up on the top
it's the same length or if you pull it back towards yourself it will start
getting longer on the front you'll see in this
video this length I've got is absolutely perfect for when we get to
cutting the bangs or the fringe so last section at the front and then
I'm going to show you how to spread this out
where do we go from there we need to go to the left and the right of this
because what's going to happen is you're going to find that
there's a short strip down the middle and long at the sides and we need to
level all that out and bring those sections forward so
let me show you let's take another rectangle to
my right and your left here and see what it looks like so you see
short hair in the middle and short hair at the side and we've got
this long stuff that's the that's the section because we cut the
strip down the middle we need to do either side of that and cut that down
so if you're just a complete beginner you'll notice what I do is
I pull my section with the comb and then I grab the comb with my thumb
it goes into the thumb and then I cut across
now you might feel like you've got five thumbs when you're trying to do this
but you do it 10-15 times and actually starts to become second nature it's
quite easy so all the way to the front now we've got
the middle and the right hand side now let's do the left hand side
same again pick that up we're looking for the long stuff that's at the side of
the center and work our way towards the front
we're really progressing here we've got the sides cut and
we've almost cut the whole top of the head
and the bit that a lot of people struggle with is the blending in of the
side but I don't want you to worry about that because I'm going to show you
a really easy way to do it let me know as well
what is the hardest part of cutting hair for you is it the
cutting the with the scissors or is it cutting with the clipper
these types of haircuts are very forgiving because when you use the
number three it doesn't reveal many mistakes the
shorter that you go with the clipper the more mistakes that you're going to
see and the good thing here with this hair is
it's very long so we're actually getting to make a difference
cutting a lot off and because it's so long
and I'm probably cutting it in half I've still got room to correct any mistakes
so that last section at the front grab all of that make sure we got it all
now we've got all this hair all the way around so like the sides the fringe
and the back all the way around the crown this is the last area we need to
tie in so what I'm going to do is I'm going to
pick up at the sides okay imagine a rectangle on the side and
what will happen is when I pull this out
there's going to be a little bit of hair sticking out the side it's like an
overhang that we didn't get with the clipper and
we didn't get with the scissor on the top
I call it cutting corners here's a look at it from the side
okay so you can see there's that hair is sticking out
it's overhanging so we can trim that away with confidence
now we need to blend this in and I want to refer to a comment that a channel
member asked Soul Connect Trey said I think
cutting along the spine is where I've been messing up
you make it look so simple but when I try it's overwhelming
lol so this refers to how I move the scissor along the and the
comb together when I move the scissor and the comb
here they move together you'll notice that the comb moves up and
the scissors move up and I keep the bottom blade of the scissor
moving with the comb you see how they move together
moving up together okay the spine of the comb is the area we want to be trimming
and don't remove too much so we've got the other side and this big bouncy crown
to do look at the weight that you can see at
the back of the head there but let's address the side here
so I'll take the corner off you can really see it overhang here
every time I lift out there's hair that's overhanging beyond
the imaginary line the straight up and down line that we made with the
clipper you'll notice that you get to a certain
height with the clipper and it's not cutting anything it just pushes the hair
away that's all right that means that that's
what we need to cut with the scissor so lift it straight out and again
put the comb in the thumb and cut straight up the fingers
and work all the way towards the front here really easy to just deal with that
overhang now here we go again the spine and the
bottom blade moving together up the way and there's not much coming
off this is what you need to practice don't take too much off you don't want
to be chomping in really tight with this method look at how
little you see coming off when I'm doing it
it's just really just dust nothing much and again a good sharp scissor is what
you need okay real quick if you're watching this
and you're just getting into cutting hair
you need a solid pair of scissors and these are seriously a great place to
start they're made with a high quality
japanese steel which basically means they stay sharp longer and they give
you really clean easy cuts no tugging or uneven lines
the blades have this special curved edge called a convex edge
so even if you're still learning your technique it helps make your cuts
smoother and more controlled they are super
beginner friendly they also come with this nice leather zipper case
so you can keep them safe and in top shape when you're not using them
if you're learning to cut hair at home or thinking about going pro these are a
great investment to start with the links in the description if you
want to check them out now back to the video
so I really want to cut this this is driving me crazy it's too long
it's so heavy and again we're just taking those corners off
straight up and down vertical with the fingers
this is going to make such a difference but what you'll notice is I'm not taking
the point of the crown short look how long that is you can see it underneath
my fingers there keeping that long keeping that bounce
because afterwards we need that body to style the haircut
we need that length there you'll see at the end
it creates a shape on the head don't take a crown too short because when you
do you actually change the head shape okay
think about an egg where the point of the chin is the
pointy bit of the egg and the crown is the fat end of the egg
when you're looking at it sideways that's what we want to create for an
overall shape with the hair and the head
so the profile view from the side looks commercial and aesthetically pleasing
again spine and scissor moving together when I was a young novice barber I used
to practice moving the scissor and the comb
along the fascia boards in the house like the
the boards at the side of the door I would just move the two of them as
cutting nothing but trying to keep them flat
and moving them in conjunction with each other
along the boards that's a good way to practice now I got the length quite
correct at the front when I cut the top so I only really need
to trim the ends I'm gonna let it lay on the comb just
around about the eyebrow now the comb is straight
therefore the fringe or the bangs will be straight too
cut straight across there very nice now and it's looking a bit
square on the side but don't worry about that
because the side is dry and the hair on the top is wet
and that sometimes makes it look square because the hair on the top
lies very flat and heavy and the hair on the side is able to stick up
but you'll see once it's dried off that it works
absolutely fine so I'm gonna hit with a hairdryer now
check this little tip out for crowns you can put your finger on the point of
the crown and dry down and that'll stop it from standing on end
I'm gonna throw some chop dust up on this is just like a hair styling
dry powder texturizing powder straight hair takes texture really well
this type of product not that great for curly hair but really
really just perfect for straight hair especially if you want that root lift
now remember the crown had a lot of lift so I'm going to lift the hair around the
crown at the front in front of it so this is what we had before and here
we are afterwards this is the end product of
our haircut we've got the crown nicely balanced with some lift from the rest of
the haircut I think it's all laying quite nicely we've got texture
really simple with a number three on the sides
nothing complicated with the trimming around the edges and a very basic
scissor cut now I hope you've enjoyed this tutorial I'll see you again
in my next video thanks for watching