The World s Worst E Bike They Didn t Fix It

RockShades
98 followers
#sport #travel #running #marathon #cycling bicycle #training #race #triathlon #swim bike #run adventure #inspire
AI Generated·May contain errors
This is the Revo hubless e-bike, widely considered the worst e-bike ever made.
I owned one.
How do I get it to stop?
The Revo began as an Indiegogo campaign that abandoned most of its backers.
The few who received their bikes discovered the same problems I did.
It has hubless wheels that barely spin.
It weighs 70 pounds.
It requires an app that doesn't work.
And it has a dangerous bug that causes the motor to enter self-destruct mode.
But even still, it looks insane.
It's like something out of a movie.
The Revo is a rare, legendary hubless e-bike that costed thousands new,
and now it's a collector's item.
So how is it that this Revo was $50?
Meet Brian.
He bought this Revo hubless bike a year ago,
and the sale started out exactly how you might expect.
Well, actually, I'd seen the Berm Peak video on the Revo,
and just thought the thing was super cool.
And it wasn't a couple days later, and this thing popped up on Facebook Marketplace.
Met the guy immediately to try to buy it.
It got splashed by a salt truck on the way over.
Everything was covered in salt.
There's pieces of plastic falling off it.
The drive mechanism was exposed.
And I tried to ride it through the parking lot,
but it wasn't really functioning.
It was doing the motor spin thing where it wasn't engaging.
At that point, I think he had it posted for 500 bucks.
And I was about to offer him $100 for it just to see how he would react.
And that's when he said, look, man, if you want this thing, I'll sell it to you for 50 bucks.
But as it turns out, Brian's Revo does work, sort of.
And although I offered to buy it off him, he refused.
Like me, he's sad for all the people who got screwed.
But also, he realizes this is special, a juicy piece of bicycle and internet history.
Brian wants to keep it.
But he did agree to leave us with his Revo,
because today I'm writing up a work order to address all the problems with it.
You hear that?
That's all human power.
Absolutely no motor.
The rolling resistance and the noise of the wheels was always shockingly bad.
But this is actually worse than I remember it.
This Revo has got a few more miles on it than mine did.
We're going to have to put that on the work order.
Service the hubs in the hubless wheels.
I don't even know how we're going to do that.
This is so much cooler than with the body on it.
Look how good it looks.
I agree.
During our teardown video, Pat and I discovered that these wheels
are particularly unserviceable.
There's everything from epoxy to plastic panels,
and really just a whole apparatus that was meant to be put together once
and then ridden into the sunset.
Oh no.
And so if we can just clean them out and add a little bit of lubricant,
I call that a win.
But that's just the beginning of the problems with this bike.
Let's jump right to self-destruct mode.
Now this is a serious safety flaw whereby if you walk the Revo,
it could actually make the cranks move, trigger the motor,
and then start a chain reaction that sends the Revo into oblivion
until it hits a brick wall or a person or something.
Here's why it does that.
So here we have a normal bicycle.
If I roll it forwards, keep your eyes on the cranks over here.
Rolling it forwards, what are the cranks doing?
Nothing.
They're supposed to do nothing.
Except the Revo in the last video did.
If you push the bike forwards, the cranks would move forwards.
And if you know anything about e-bikes,
you know that that causes the pedal assist to engage.
So the motor spins.
That in turn pushes the bike forwards, which turns the cranks more,
and now you have a chain reaction we know as self-destruct mode.
The question is, does this Revo also have self-destruct mode?
Okay, so we're going to push the bike forwards.
The cranks are moving forwards.
That's not a good sign.
But it only engages if you're pushing it briskly,
like if you were crossing a street with the bike
or pushing it through a doorway or something like that.
So let's try it and see what happens.
Okay, I'm going to hold on to the handlebars really tight,
and I'm going to put my finger on the brake lever
so that I can disengage the motor if this happens.
Yes, it has self-destruct mode.
Now, of course, we have to put that on the work order.
We have to prevent self-destruct mode somehow.
But just exploring the workarounds actually reveals more problems.
First of all, if you turn off the pedal assist
by pressing the little minus button a bunch of times,
it does disable self-destruct mode.
But the word workaround,
when you're talking about an e-bike taking off on its own,
it shouldn't even exist.
There's no such thing as an e-bike that needs workarounds
to keep it from riding away from you.
Now, the other way that you might be able to stop it
is to turn off the e-bike.
How do you turn it off?
You can't turn it off.
If the kickstand is down and you're pushing the bike,
the bike is on.
There's no off button.
The bike works with an app,
and I don't even think you can turn it off with the app.
The only way to turn it off
is to remove the freaking battery out of the bike.
That's not an acceptable workaround.
So we've just revealed some other things here.
How about an on-off switch?
Wouldn't it be nice if the bike had an on-off switch?
Maybe we should add that to the work order too.
And there's more.
Let's move on to the catapulting kickstand.
God, it makes this high-pitched whining noise
the entire time it's on.
And then, of course, all right,
the catapulting kickstand.
Check this out.
So in Revo's marketing,
they refer to this as the invisible kickstand.
See, it's invisible.
It's supposed to be invisible.
And actually, there's a lot more to this kickstand
than what meets the eye.
And as some of you pointed out,
it could potentially cause injury.
Check it out.
A normal kickstand moves rearward.
And actually, if you pedal the bike,
the crank will automatically stow it.
But the Revo has a smart kickstand.
See, if we put the kickstand down,
it actually locks the rear wheel
so that the bike can't move.
And then in the app,
it actually flips a little switch inside here
so that you can't put the kickstand up.
Seems like a great feature in theory,
but here's the reality.
See, the reality is,
if this kickstand were to deploy
while the bike is in motion,
which is not such a weird thing to worry about,
it would not only lock the wheel,
but it would bind up against the ground
and actually lift the rear of the bike up.
A catapulting kickstand.
As if a century of bicycle makers all got it wrong,
Revo not only wanted to reinvent the wheel,
but also the kickstand.
And the consequences are clear.
And so the invisible smart kickstand
is actually the catapulting kickstand.
If we're going to fix everything on this bike,
that's definitely got to go on the work order.
But this is not the only thing
that's smart about the Revo.
So the Revo being a smart futuristic e-bike
that literally tries to reinvent the wheel,
of course, it relies on an app.
It doesn't even have a screen up front
to see your speed or assist level or battery level.
It's all in the app.
And of course, that app has been completely discontinued.
But even last time when I was able to download it,
I couldn't even get past the pairing screen.
And so a lot of these features are dead in the water,
like the fingerprint scanner
or that smart locking kickstand.
And so we don't even have access
to the kind of information you would
on a base level AliExpress e-bike.
And God, that freaking whining noise.
As I was saying,
we might be able to get to some kind of data wire in here,
tap into it and use some kind of microcontroller,
maybe with a little help from Claude
and get some kind of screen on this thing.
And so I'm going to put that on the work order,
de-appify the Revo and give it a screen
like a normal e-bike.
Are you ready?
I am ready.
Are you?
I'm so ready.
So this cheap ABS clamshell is held together poorly
by a bunch of steel screws.
And what Pat and I discovered during our teardown
is that they are all hopelessly rusted,
like consistently rusted to an incredible degree.
And I love this audience
because a bunch of people identified the smoking gun,
a galvanic reaction.
The Revo's frame is made completely out of aluminum
and then all these plastic panels are screwed in
with basic steel screws.
So in the presence of water or even humidity,
the pair becomes a sort of battery,
whereby the screw becomes the anode,
a sacrificial part that wears away.
Now it could very well be that the engineers
chose stainless steel
or specified some assembly compound to isolate it.
But I'm willing to bet
that when the time came to cut costs,
someone else said,
why are we using stainless steel screws to hold on panels?
Those engineers are always overdoing it.
Galvanic corrosion.
So let's remove one of these screws
and find out if this Revo has experienced the same thing.
Okay, so I was about to go into one of these panels
and remove a screw.
I can just see that they're rusted already,
but let's take one off anyway.
Yeah, this one's actually not that bad.
It looks like they might've even put
a little bit of Loctite on it here,
but yeah, definitely rusting.
And I don't know how many M4s or whatever these are.
We're going to have to replace if we want to fix this,
but I bet you it's a lot
and we're definitely going to put it on the work order.
Now it is worth noting that many of these screws
aren't actually holding anything on at all.
As Pat and I took that bike apart,
we realized that the panels would just come off
and the screw would still be in there.
And so the underlying plastic broke away.
And so let's take a closer look at this clamshell
because actually there's a lot more to this
than what meets the eye.
Yes, the cheap plastic clamshell.
If you look at the comments from people who got their Revos,
that's the biggest complaint.
They're like the entire thing is covered
in all this cheap crap
and I paid thousands of dollars for it.
Why use a material like this?
I mean, it's as if the bike is molting.
It's shedding its skin,
but there's no fresh skin underneath
like you would find on a snake.
Here you can see this back piece is starting to come off.
It's cracked.
Brian had used black Gorilla Tape
to hold some of the other panels together.
And in all fairness,
it seems to be doing a better job
than what the bike actually came with.
Now this could be another situation like the screws
where the engineers might have specified
like some other polymer that's stable in sunlight
and doesn't degrade like this has.
But when the hatchet came down,
they decided to just make it all out of ABS.
And this stuff is absolutely terrible.
Every Revo I've ever seen has cracks everywhere.
This one is falling apart.
I don't even know what we do about that, honestly,
but I would imagine it's going to involve a lot of epoxy
and maybe some 3D printing.
So we'll put that on the work order,
address the crappy clamshell.
Maybe we could replace some of this.
Maybe we could find a way to fasten it together better.
I really don't know what we're going to do
until we start digging into it.
But actually this clamshell has a salacious Easter egg
right here on the rear.
I want to show it to you.
Right here at the rear of the bike,
they put this color match tape on every Revo
to hide the name of the parent company.
Underneath this, it says Benno,
not to be confused with Benno with two Ns.
This company proudly displayed their name on Revo Marketing,
but quickly pulled back before the bikes were delivered.
They realized it was a disaster and it was too late,
having already paid for the injection molds.
And so they covered it up with a literal Band-Aid.
In my opinion, this is much worse.
Instead of owning it, they half-assed the cover up.
It's the Streisand effect.
Addressing it actually attracts more attention.
And now I'm talking about it on a YouTube video
for the second time.
So the cheap flimsy panels on the Revo
are actually legendary and chock full of lore.
We've got to leave them, but we've got to improve them.
These tires are airless,
meaning they have solid cores like shopping cart wheels,
which is not unique.
Many bicycles, including some rental bikes,
have airless tires, but those feel a lot better.
And the Revo rides particularly badly
because these are just huge aluminum hoops here
with airless tires on them.
There's no compliance like you would get
with wheels that have spokes and rims.
And so it's doubtful we can actually install
pneumatic tires on this bike,
but we're going to add it to the work order and poke around.
Also, the brakes.
Brakes are the most important safety feature
on anything that moves, full stop, pun intended.
These brakes are wildly ineffective,
even when you squeeze them with both your hands.
Oh crap, there's a speed bump.
Oh my God, that took all my might.
As you can see, these are cheap U-brakes
with the pads slammed to the ends,
absolutely minimizing leverage.
And I don't say this to brag,
but a physical therapist recently measured my grip strength
and they thought I was like a gorilla hybrid, okay?
I can grip hard and I can barely stop this bike
to save my life.
So I'll put brakes on the work order
and we'll see what we can do about it.
And speaking of grip, these grips just move.
Grips are solved technology.
Every bicycle comes with grips
and they manage not to move,
but both my Revo and this Revo have whiskey grips.
They just move everywhere that's going on the work order.
And I did mention the motor works.
This bike has electric assist,
but it is so severely underpowered,
which I did complain about in the last video.
And someone in the comments suggested
that I didn't understand e-bike regulations,
but I wasn't referring to speed.
I was referring to its ability to climb hills.
This thing is 750 Watts,
the legal limit for a class one e-bike in the United States.
It doesn't have gears.
It's very difficult to pedal.
So I expect that it can at least make it up a moderate grade,
but this thing just slaps on 3% grades, 2% grades.
It's like it's just whining and complaining at you.
Maybe that's for the better given these brakes,
but we're going to add it to the work order anyhow.
Also that whining sound it makes
when it's just sitting there on,
I don't remember my Revo doing that.
It could be something we can fix
or it could be something we can't fix.
It's probably the brushless motor controller,
almost like the throttle is being pushed a little bit.
Maybe we can fix it with some contact cleaner
or maybe it just makes that noise for all eternity.
God, that freaking whining noise.
And if all that wasn't bad enough,
both of these cranks are loose.
And here's another one you guys pointed out.
This USB port, which I said is kind of nice
because you can charge the phone from it.
It's just facing the sky with no cover.
Now I've spoken to a Revo owner
who probably got one from a different batch.
His has a rubber plug on the USB port.
This one like mine does not.
And thus you're one rainstorm away
from filling it with water.
So we'll add that to the work order
and actually we can fix it right now.
I suspect the rest of this work order
will not go as smoothly as that just did.
So let's review.
Just like my Revo, this one is very, very loud.
It relies on an extinct app to do basic things
like check the battery level.
It rides like an upright piano.
It has a catapulting kickstand,
whiskey grips and guaranteed galvanic corrosion.
The plastic shell is coming apart like they all do.
You can't turn it off.
The brakes barely work
and it features a self-destruct mode.
The company that made the Revo, Benno,
was so embarrassed they tried to cover their name.
It seems like we've got our work cut out for us.
Now look, I try to avoid holding my audience hostage
with cliffhangers.
Most of these videos resolve immediately
but these issues will take me weeks,
maybe months to figure out.
And so this work order will be addressed in a future video.
But why?
Why fix any of this?
Well, interestingly enough,
Brian is a bit of an e-bike enthusiast.
He knows about e-bikes and he knows how to work on them.
In fact, he has a business specializing in e-bikes.
But knowing about e-bikes does not help you with the Revo.
Say what you will about the Revo,
but it's original.
It's derived from nothing.
It doesn't resemble any other bike inside or out.
It's like the people who made it
had no experience with bicycles.
And yes, I get it.
The whole concept was to make a crazy looking bike
with hubless wheels.
But if anything, that reinforces my point.
They should have stopped there.
The fingerprint scanner, the app,
the invisible smart kickstand,
they're of no consolation
when you can't even turn the freaking thing off.
And that's probably the reason Brian wants to keep it.
I want to keep it because it's so unique.
I mean, I've never seen another one.
So it's kind of an engineering design masterpiece.
The fact that this thing goes down the road
under its own power.
So I feel like I need to preserve that.
And if I had to scoop this thing up,
it'd probably be in a dumpster.
And I agree with Brian.
This thing's hilarious.
It's a conversation piece with an incredible story.
And if we can solve even half these problems
for one Revo owner,
perhaps others can learn from the experience
and we can right some of the wrong.
It's going to take some 3D printing,
some poking around with a multimeter
and probably some help from my friend, Claude.
I hope you'll be there for it.
Thanks for riding with me today
and I'll see you next time.
