I Built A Bed On Rocks!

Design & DIY
11 followers
38 Video Views·May 11, 2026
I used granite boulders weighing about 200-300lbs and walnut to make a bed for my new house. The bed is attached to the wall with a steel ledge so that it appears to float with the wood frame resting on 2 granite stones. I cut the stones with an angle grinder and lined them with cork to keep the stone from scratching the wood.
AI Generated·May contain errors
Today I'm making a bed out of walnut and rocks. This bed is for my new house and this video is
sponsored by Helix. This is a design idea I've been thinking about for a while and I wanted to
execute it with just basic handheld power tools. I've been making projects with rocks for a couple
of years and that led to other rock guys reaching out and wanting to collaborate. My buddy James
Lawston has a real good collection of rocks from his property and he gave me a couple 250 to 300
pound boulders. I believe these are a type of granite and while I was tempted to go bigger
I tried to stick with the rocks that I can move by myself. Most of my rock fabrication is done
with an angle grinder. This is an inexpensive pretty basic power tool and I just use tile
cutting blades or these diamond grinding wheels. The first step is to flatten out one side of the
stone so that the base of the bed is nice and stable. I don't think it's perfectly flat because
I'm going to use some epoxy later so I just grind a little bit and then hold a board up to it to see
how wobbly it is. I picked two rocks that were about the same height and now I'm going to make
a jig that will inform me how much to cut into them so that I have a level base on both sides
of the bed. I used a sharpie to draw a line at the height of the bottom of the bed frame. Now I can
use my tile cutting blade and just cut along that line and then slowly chip out pieces. I make cuts
about every three quarters of an inch which results in pieces of stone that are easy to chip
out with a hammer and chisel. I'm trying to make a flat ledge in each one of the rocks that the bed
frame can sit on and it only took me about an hour to process each rock. None of these attachments
for the angle grinder are particularly expensive and I'll put links to them in the description
section below. I carved the bottoms of the rock to be mostly flat but I found this trick works
really well to get them perfectly flat. What I do is I lay out a sheet of silicone and I try
to find the flattest surface possible to do this on. Now I can just spray this anchoring epoxy
all over the silicone and then just plop the rock right on top of it. This anchoring epoxy
is incredibly strong and bonds really well to stone and concrete but it doesn't stick to the
silicone and the little imperfections on the underside of the rock that I tried to flatten
get filled in by this epoxy resulting in a nice flat surface that doesn't scratch up my floors.
This is also a lot less time consuming than trying to grind a rock perfectly flat.
I got a good deal on a bunch of walnut that ranged in thickness from one and three quarters
to one inch in thickness. The boards weren't fully kiln dried and they had a bit of warp to them.
I need two rails that are one and three quarters inch thick for the outside frame of the bed.
I ripped these with my Ryobi circular saw and since the wood was trying to close up and squeeze
the blade I just used a putty knife shoved into the cut to keep the pressure off. Now I have the
two main side rails that will serve as a structure for the bed platform. I made angle cuts at either
ends just by drawing a line and then following it with the circular saw. I used a palm router
to put a radius on the outside edges just to make sure that the corners and edges aren't too sharp.
This is pretty basic woodworking. It doesn't require a lot of skills. I didn't need a full
wood shop. Just a handful of battery powered tools and a little bit of willingness to tolerate some
imperfections here and there. For the deck of the bed I need boards that are long and have
two parallel edges. A jointer and a table saw would be the ideal way to achieve this,
but you can get pretty close with a circular saw as long as you have a nice long straight edge.
For my cross cuts I just use a speed square and I'm able to get nice 90 degree cuts.
This is one of the first pieces I made for my new house in Joshua Tree and I'm really enjoying
having five acres which gives me very scenic places to do a whole lot of sanding. The structural
integrity of the bed frame comes by connecting flat pieces which will make the deck to these
more vertically oriented pieces that range from about three to four inches in height. I'm connecting
them with pocket holes just using my kreg jig so I have the security of both glue and screws
for these connections. Pocket holes are a great low cost option for connecting pieces of wood
as long as you have a design strategy that will conceal these angled holes. I'll take having a
lot of open space over a lot of tools any day when it comes to building stuff. High ceilings,
concrete floors and good light made the fabrication of the pieces quite enjoyable. This piece is going
to go at the head of the bed and rest on a steel ledge that will be attached to the wall itself.
I used to have a lot of anxiety about assembling wood structures without perfectly straight or
flat boards but here's how I get around it. Okay so this end's a little off the ground
because our cut isn't perfectly straight. Now I want to attach that board. This board's flat on
the ground. This board's a little up in air just at this end. So I could just fasten this to there
but then I'd have a lot of sanding in between there. So what I'm going to do is pick this up
and put a couple of these which are just sliding freely in. Let's try just to bring
this board a little closer to the top. I'll do one there as well.
So I think we'll start by driving the screws on this side. I don't really care if there's
only about an eighth of an inch of warping to the entire surface of the bed. I just want to
get the edges aligned to reduce the amount of sanding that I'm going to have to do later.
So I have a little gap between this board and this board. Now one because this board's a little bit
warped but two because this board wasn't cut perfectly straight. There's probably a little
bit of a probably a sixteenth of an inch of variation. But because this board can bend
I can pull these two together. Woodworkers like to say that you can never have too many clamps
but you don't actually need that many if you're using pocket holes in combination with your glue
up. Now with this side I'm a little bowed in the middle so I'm actually touching the ground on
either side so it's probably a little less than a sixteenth of an inch right under here in the
middle. So it's a different challenge but I think I'll be okay just placing this one flat. I might
put a popsicle stick under there just to bridge that up but should be fine either way.
So this board is bowed a little bit up so I probably won't put the popsicle stick under
there. I'll probably just have to do a little extra sanding in this particular middle zone.
And that's not so bad that's actually fitting pretty straight. My concrete floors are pretty
flat so I can use my body weight to push the wood down flat to the concrete and get alignment that
way. So these pieces are coming together pretty good. I do need to push down on that. This is a
little bowed so I think what I'll do is first I'm snugged up against this side so I can go down here.
Pocket screws are really good at pulling the pieces together to minimize the cracks but you
do have to pay attention to sequence. I make sure that a good fit is possible first and then I start
driving in the screws. Now that the perimeter of the frame is assembled I can measure the length
for these walnut cross supports, cut them and then screw them in place with a combination of pocket
screws and some cabinet screws. All right now I can flip the frame over and see how well my edges
are aligned and how much sanding I need to do. And now I'm confronted with my not so perfect cuts.
I need to sand these pieces where they meet together not so that they're all perfectly flat
but just so it's a continuous surface even if that means it's a little bit curved.
All right so after about five to eight minutes of sanding I have a surface that's not flat but that
is smooth. Now it's pretty flat between these two pieces. It definitely dips down to this not so
straight rail but all I need is to be able to have my hand go smoothly across. And if I put a marble
right here would it roll? Yeah but not the end of the world. And to be fair I think it's one of the
little when you see those little wavy imperfections kind of proves that it's not veneer. For the slats
themselves I'm using a combination of half inch and three quarter inch plywood. The deck pieces
of the bed frame are about an inch and a quarter so this combination will get the slats flush to
the walnut. I'm screwing the plywood together just so that these two sets of flats are easy to move
and won't slide around too much. I'm gonna use a heavy piece of angle steel to connect the bed to
the wall. I just pulled a piece out of my scrap pile cut off some of the weird ends and then
ground away all the rust with my angle grinder. I used a stud finder to locate the studs through
the drywall then drilled holes through the steel so that I can secure it to the structure of the
wall itself. I've been using Rubio Monocoat quite a bit. It's expensive but it doesn't require a
sprayer or a spray booth. It looks great, easy to apply and I found the finish to be quite durable.
I added in some steel corner brackets and mending plates just to reinforce everything. I have a
feeling that this wood's going to move a little bit over time so I may need to add a few more
pieces of steel in the future. This is the first headboard assembly that I made. I later switched
it out because I, well, I just didn't like the way it looked but I just used the same combination
of tools and it wasn't that hard. I did like the idea however of having a little bit of storage
at the head of the bed. All right, it's finally time to haul the rocks into place and start
assembling the entire bed but first let's hear a word from the sponsor of this video, Helix. They
made the mattress that I'm going to sleep on. Sleep is really important but when it comes to
picking a mattress it's hard to know what features and specifications are going to work well for your
specific sleep preferences and this conundrum is why I chose Helix. It starts with a sleep quiz
that helps you pick your mattress. You start with the basics like age, height and weight
and then you start selecting different sleep preferences. I selected a queen size mattress
for a stomach sleeper, picked a medium feel in terms of firmness and indicated that I rarely
have back pain or snore. I was recommended the Helix Dusk and I've been sleeping on it for almost
two months now and it's great. My Helix mattress arrived promptly and unboxing, unrolling and
removing the protective plastic was a dream. I saved the plastic to use as a drop cloth in a
future painting project and it was really cool to see the mattress expand once I cut the airtight
packaging. I've built a lot of beds and I've tried a lot of mattresses both for my houses
and for the hotel but this was the first one that felt like it was designed for me. Comfort means
different things to different people so it's nice to have a bunch of prompts that guide you
in the right direction. Descriptions like firm or soft are pretty vague so now that I've slept on
this and know what I like, I was curious to see what comfort means to me like how much does a
mattress compress when I drop a 40 pound weight on it. I recommend taking the Helix sleep quiz so
that you can see what comfort looks like for you. In addition to the mattress, I also got a couple
of pillows from Helix because it's nice to start with fresh pillows if you're getting a new mattress.
So here's to fresh starts and good sleep. Now, you might be wondering how do I get one of these
Helixes? Well, it's pretty easy. Just go to helixsleep.com slash homemade modern to get 25%
off sitewide or you can just scan the QR code here on screen. That's helixsleep.com slash homemade
modern. Thank you Helix Sleep for sponsoring this video and let's get back to the project.
I wanted to create a buffer between the hard surfaces like stone and steel and the walnut so
I just used some steel and stick cork to create a firm but not so scratchy lining. I like cork for
applications like this because it's natural and it doesn't trap moisture. I used scrap 2x4s to make
a block that would hold the bed frame up at the right height so I could kind of slide the rocks
around and figure out where exactly I wanted them to go. I slid the rocks in place, added in the
headboard assembly, checked to make sure that that little storage compartment that the hinges on it
would still open and close so I couldn't get it all the way up to the wall. One of the things I'm
doing with projects for my new house is pushing really fast to get them mostly complete. This way
I can live with them for a while, test everything out, and then see what adjustments need to be made.
There's always problems or challenges that I didn't anticipate and some of the ones that I did
anticipate turned out not to be a big deal. I've been sleeping on the bed for a few weeks. I really
like it. Everything's super stable, rock solid if you may say so, but I think the headboard is a little
too high aesthetically. It just feels a little too much like it's looking like a sled. So we're going
to switch this out and there's a couple other things I want to adjust. I anticipated the wood
sliding on the rock a little bit more which is why I put in this cork buffer to kind of create
some cushion but the bed really doesn't move at all when it's anchored to that steel ledge so
I'm going to remove this just because you can see that edge and I want it to just look a little
cleaner. I'm also going to slide the rock back just a bit. I made sure not to glue the headboard to the
bed platform because I wasn't entirely sure about it. That made it quite easy to switch it out with
a smaller and simpler version. I only removed the cork on the side wall of the rocks. I kept the
cork underneath the wood where gravity is bringing the walnut right to the stone. As a design this
piece definitely stands out and makes a statement for the room. So let's talk a little bit about
some of the design choices. The thing I'm second guessing the most is those tapered ends. Here's
what it looks like with just a straight end and I think this is an improvement. If I wanted the
mattress to be less visually dominant I could have gone thicker in the wood with the mattress
recessed below the surface of the deck. I like the proportions of this but I don't like the idea of
what it would mean for tucking in the blankets and sheets. Now I don't hate the taper, it's fine.
I just think the straight edge probably would have been the better choice and I think I even
could have gone longer with the wood platform itself. There's something really peaceful and
solid about combining wood with stone. I know a lot of people are gonna have opinions about bumping
shins and stubbing toes but honestly this is not an issue for me. What I'm most proud about is how
few tools were needed to build this. What I find interesting about this project is how unique and
substantial it looks relative to the few amount of tools that are needed to build it. All of the
stone fabrication is done with an angle grinder. This is the grinding wheels that I get off of
Amazon. They're really good for just removing material. Got a little curve to it but you can
still get a relatively flat surface if you're careful. For cutting and chipping out the pieces
I just go to Home Depot and get these segmented tile cutting blades. If they can cut porcelain
tile they can cut stone. They're about 20 bucks and you can get a lot of use out of one of them.
When you're going with a battery-powered angle grinder, batteries become the key component
because these use a lot of power. I'm really happy with the upgraded edge batteries and that really
gives me a lot more use out of that. When it comes to connecting the wood, I'm just using drill and
driver powered by this pocket hole Kreg jig. This is the most minimal one, really inexpensive. You
can get the whole little package for 20 something bucks. When it comes to cutting the wood,
I'm doing all the cuts with the circular saw. I recommend at least a seven and a quarter inch
blade because, you know, some of this walnut is pretty thick. For straight cuts I use my
squeezy clamps. These are 99 cents each and I just got a piece of MDF trim to guide that along.
Then I go through one of those trim boards every six months or so. But again, you can just pick
one up from Home Depot. A little longer than eight feet is perfect for ripping down the plywood.
Finishing the wood components, this is basically all I'm using. An orbital sander and a little
battery-powered router. These aren't exactly fine woodworking tools but also, well, the amount of
sanding I do would probably defeat that classification in the first place. So this collection
of tools I think is great if you're an intermediary DIYer that's looking to get into the beginnings of
substantial woodworking projects. When it comes to glue-ups and clamps, I really like these Kreg
clamps. I have like five of them in total. They're different lengths. They're quite strong. I use them
for gripping things like the headboard and just holding that quickly in place to clamping up the
glue-ups themselves. I also like that these are reversible so you can even use them as a spreader
or in some cases even for lifting things if they're not too heavy. This is a good example of
how I'm building out the furniture and millwork pieces for my new house. I know I haven't been
that active on this channel. I've been so busy building the house and then building the hotel
that YouTube has been kind of, well, it's been getting neglected. My plan is to keep showcasing
these major build projects for the interior of the house and once everything is furnished,
then I'll edit together the entire construction sequence with tours so you can kind of see how
the idea evolves and gets completed. As for the hotel itself, well, it's getting close to
completion and if you check out on Instagram, Hotel Reset, you'll see the progress. Honestly,
it's been a total grind and I'm feeling a little exhausted but I'm looking forward to opening it
up in May and then getting back to building stuff with my own two hands. So what I'm trying to say is
thank you for sticking with this channel. I know there hasn't been a lot of content but
more is coming soon and I appreciate this long-term relationship that we find ourselves in.
Oh, and if you are new to the channel, don't forget to subscribe. Thanks. Bye.
