THE SIMPLEST TABLE - GLUE TWO BOARDS WITH RESIN AND THAT'S IT!

Design & DIY
11 followers
90 Video Views·Mar 4, 2026
A budget-friendly, stylish black acacia and epoxy table with no workshop or heavy machinery required.
Have a great day friends and a good mood.
And most importantly health to you and your loved ones.
In this video we will together make a wonderful
dining table from acacia and epoxy resin
from the Artline brand
without a special workshop without special tools.
You already know the backstory of how I made these acacia slabs for myself
from previous videos.
Well let's refresh our memory a bit on how I found acacia
and made slabs out of it for future projects.
Hello dear friends we are currently in the Kursk
region and it seems that some technical work is being carried out along the roads
and a lot of
acacia trees were uprooted.
There are work along the roads and twisted out a lot of opportunities there.
Quite old thick acacia trunks.
It is a very
beautiful tree with a beautiful internal texture.
It is quite difficult to find and you simply cannot cut such a tree.
The tree is considered decorative but it has an incredibly beautiful
internal structure.
My heart bleeds in fact the workers were simply burning acacia trunks along the roads.
In fact the workers simply burned down the acacia trees along the roads.
In large bonfires choosing
the most attractive trunks up to
140 centimeters in size so that I could physically
lift and position them for sawing I proceeded
to saw the slabs.
Detailed videos are available on the channel on how
I saw these slabs with my
chainsaw.
The saw is not professional of course
plus I don't have much experience sawing
such slabs so the cuts turned out to be simply
huge.
The task was to proceed with their leveling after drying
the slabs not far
from the dacha there is a sawmill where I arranged with the workers
to remove the top layer
so-called veneer using a bandsaw
on a machine literally one centimeter when I
made the slabs I made them six to seven centimeters thick so that
during atmospheric drying for a year the slabs
would not deform and it was possible
to remove literally
one centimeter from each side making two identical boards 45
millimeters thick that is we got a 45
millimeter thick blank for the
table the texture of acacia
is here is my future project
the slabs have completely dried
to about seven to eight percent woodworking dryness in its time
to start creating
the table I am leveling it using the old
school method and performing end trimming for this I
bought a Bosch circular saw a review of this saw is on the channel
and is quite detailed if you are interested you can watch it
in general I decided to review every power tool
that I will purchase in various stores so that
you know how it works whether it's good or not whether it's worth buying
as I said earlier I am absolutely not a woodworker
buy it as I said earlier I am absolutely not a carpenter
or a carpenter I don't have a special workshop and not a single
serious heavy machine everything will be produced
in ordinary dacha conditions that each of you has
this means that any one of you can make such a table
there is nothing complicated about it friends after finishing
there's nothing complicated about it friends after finishing
the end trimming I proceed to remove the bark
due to the fact that the wood has completely dried the bark is removed quite
of the fact that the wood is completely dry the bark is sufficiently
easily with an ordinary chisel under the bark I observe
small holes of various sizes and it is immediately clear why
the workers decided to uproot the acacia trees
the bark beetle ate them yes the trees are affected by the bark beetle
the bark beetle ate them and the trees are affected by the bark beetle
once I have completely cleaned everything of bark I will need to thoroughly
sand the sides these acacia ones and prime them
with epoxy resin to seal these holes
they are quite small not all are visible to the naked
to minimize bubbles I want to
achieve a completely transparent river of epoxy resin
without bubbles next the most
beautiful part of the slab I sand
up to 500 grit in increments of 4080 120 and
so on at 500 grit look
how the pattern has been revealed
of the entire acacia texture the left side
is unsanded and the right side
is already sanded the back
side of the table on these slabs there are still saw marks
to avoid reducing the thickness of the slabs too much on the sawmill
where I went in for the front part one shows the most beautiful
sides without saw marks of course from the chainsaw
I tried sanding the sides while lying down which
turned out to be quite inconvenient I came up with a solution
I clamped two blocks with clamps and
positioned the slab vertically
and quite quickly and easily using an angle grinder at low
rpm so the wood doesn't burn I quickly sanded
the sides the ends were also
sanded here is the completely prepared
wood for pouring epoxy resin as such
I won't create a mold it will just be a base
for the sides of this table I want to keep the natural
live edge weld up
sides that block the resin from flowing out
we just made we will use
artline wood pro resin a very interesting new resin
with a long pot life
and excellent degassing but first
we need to seal everything thoroughly to
prevent resin leakage so let's start friends I am using
regular silicone
sanitary sealant for bathrooms the base
is plastic film and on the film an old silicone
tablecloth I've worked with such a tablecloth
before you can see my previous video black
epoxy kitchen table I put the
film underneath because I wanted to try making waves
what if there are waves on the transparent
river due to the polyethylene film
what will come of it we will seal the back of
the slab so the resin doesn't spread
too much underneath is a plywood sheet
all of this is leveled with a spirit level
so the pour is even and everything is thoroughly
sealed with sealant to prevent any
resin leakage I carefully
screw on the side pieces sealed with sealant
underneath and the remaining dust and shavings
are removed with an ancient vacuum cleaner that is older than me
a classic immortal Soviet
vacuum cleaner I will use it for
priming one kilogram of crystal brand artline
resin this resin cures at over one
and a half centimeters per layer but I am not going
to pour it in layers now we will be
priming so that during subsequent pouring
we have minimal bubbles emerging from the wood course
or none at all so this is a very important
step friends pay
close attention
interestingly with this resin I patiently poured one and a half
centimeter layers for a computer desk a very
interesting art object if you haven't watched this video
I recommend it now
will be my favorite part
will be my favorite will be
to reveal
itself just like with a transparent varnish
the texture of the wood just like when coating
with oil will reveal the entire
pattern and show all its beauty there are many
flaws on the resulting slab so I will be
forced to completely cover the wood with epoxy
resin I want to achieve 100% loss
and a completely transparent river
the task is quite difficult but I will
try to complete it look at the beautiful
texture of the Acacia pattern
this is ordinary yellow Acacia there is also
pink Acacia which is found in the Moscow
region in more southern regions
it has such a rich yellow
color the Acacia wood itself if you
buy it already calibrated dry slabs
is quite expensive in Moscow
it's a great stroke of luck that I managed to prepare
it entirely myself which significantly
reduces the cost of my
product I've wanted for a long time
to create a stylish table for myself
a river table that is a dining table in the
lock style next friends we will take the
resin this ProArtline resin is mixed
3 to 1 we will pour
4 kilograms for the first layer
with dye I am making it a bit darker
a surprise awaited me here
after interacting with the hardener the dye acquired a
non-standard color I worked with
this dye for the first time but it's worth
understanding that the pot life of ProArtline
resin is quite long according to the
specifications it's 20 hours for full curing
3 days for a gel-like state and 8 hours pot life
the layer is poured no more than 4 cm
which suits me perfectly
I plan to pour in 3 layers
to convey the color and to
control and avoid resin leakage
avoiding resin leakage
after all I am not a millionaire's daughter
resin like any material costs money so I want to avoid
leaks which is why I pour in layers so I have time
to control the leak and
lock it with sealant if it appears
so we poured the first layer about 2 cm
a little resin went into the layer because there were notches
but this will level the back
for the second layer I used less dye
we pour 4 kg again
the dye continued to work in the resin throughout its pot life
meaning the color eventually turned into the rich
blue declared by the manufacturer
I use a hairdryer to try to remove
bubbles but there are practically none due to the
long pot life of the resin
the art object degases completely, all
bubbles escape since there is no special room
pesky mosquitoes get in and somehow drown themselves in the resin
I don't know why they do it
but I patiently remove them with a stick
not calculating the edges perfectly I built them up with
wooden blocks and a reserve
of silicone film, this is the final layer I want
to note friends that the resin must be
thoroughly mixed
then poured into a clean container and mixed again so that no
hardener remains on the walls, this is practically
the final layer which I pour
almost flush with the edges of the wood but without allowing the
resin with dye to spill
onto the front of the table
I carefully pour from a small jar
the front of the table
I carefully pour from the small jar
ill pour another kg of resin
just clear and completely level the
resin with the wood, next everything will be leveled by
sanding, just in case well use a hairdryer in case there are any
microscopic bubbles in case I missed them
magnificent wood pro resin
complete absence of bubbles and good transparency
with full stabilization
and here our art object is completely set, I arrived a week later
full resin stabilization
occurs in 3 days, plus or minus 1 day maybe
depending on the ambient temperature and humidity
well I let the table stand for a week
just in case
we disassemble the conditional form in essence
just 2 edges and a plywood base film and
silicone tablecloth epoxy resin is completely
stabilized
I want to see how the
waves and folds created with the help of
polyethylene film look
see how easily the silicone tablecloth
comes off the hardened resin
and now let's see how the folds look
by the way it looks cool
depending on what kind of art object you want to create
something very ancient and windy but I have
a modern loft style so I still decide
to remove these waves and folds
they are removed quite easily with mechanical sanding
using an angle grinder or sander
the river is completely transparent easily
remove silicone residue which
blocked the stylish part of the resin flow well
then friends let's remove all these folds
and completely level the stylish
part to achieve a perfectly clear
smooth river, a little effort and
patience and all the folds are removed
but you got the idea, it turns out really great
with the help of film I got a computer desk
and its edges were like chopped ice
by the way very beautiful
the back part is completely leveled
next we perform full sanding of the table up to 500
grid this is enough because I will
now pour one kilogram of resin
on the front part for complete leveling and
elimination of all flaws
I notice a slight orange peel but I see
absolutely no bubbles when pouring resin
I recommend working in a serious
respirator which is used for painting
when sanding you can use a regular dust mask
respirator this is essential
to protect your respiratory organs
a little patience and thorough sanding is complete
final leveling with epoxy resin
is also done with wood pro
one kilogram I level the table with a level
so that everything thoroughly spread out
completely evenly after three days you can
perform final sanding for coating
with varnish everything spread out
perfectly and evenly I don't have any
special room I poured it in the garage
I will apply varnish on the veranda
I sand outdoors for coating with varnish
I will sand up to a thousand grid
this is quite enough you can even get
by with 600 or 800 but I decided to go
up to a thousand considering that I
already have a spray gun I first used it
in the previous video black epoxy table
for a spray gun a sufficiently
inexpensive ordinary Bosch spray gun
for 4,000 and a bit I bought it at Leroy
I decided to sand it to a thousand grit
through a long process of trial and error
I found that automotive lacquer with a
high solid content adheres best to epoxy
resin this lacquer is great resistant to
chip scratches and most importantly UV
rays which will prevent the dye in the
epoxy resin from fading that is a
sufficiently strong resistant automotive
lacquer we will use German MIPA lacquer
already tested lacquer on another product
we used 15 kilograms of resin friends
for our river in total along with the
primer kilogram not Woot Pro but crystal
and we had 14 kilograms a total of Woot
Pro resin hardener ready mix was used
the table size is 130 centimeters by 70
to 75 at its widest point we have a live
edge so there is no exact width about 70
to 75 the thickness turned out to be
almost 5 centimeters two component
automotive lacquer thoroughly weighed it
is absolutely crystal clear
it will only emphasize the beauty of our
table absolutely not changing the color
and the resulting rivers of epoxy resin
would die do you see the round table in
the background a very interesting art
object see this in the next video to not
miss interesting stories turn on
notifications and subscribe to the
channel friends I thoroughly coated the
backside after a day the lacquer dries
for a day I also coated the front part
and we proceed to intermediate sanding
again to a thousand grit after the first
coat there was a slight orange peel some
bumps that are impossible to avoid after
all I don't have a paint shop here's the
front of the table after the first coat
of lacquer and intermediate sanding to a
thousand grit with a Makita sander now
we will apply the second coat with a
spray gun MIP automotive lacquer I
applied the coat quite thickly perhaps
it's not necessary but I want the table
to be reliably protected the lacquer has
fully set look at the effect there are
practically no flaws on it anymore
however small bumps still occur
therefore before the third coat we also
perform intermediate sanding to a
thousand grit I start with six hundred
six hundred thousand eight hundred and
then one thousand that is it's quick it
doesn't take much time
note how this lacquer it stood for a
week and gained hardness is quite
difficult to sand that is it's a really
very strong lacquer resistant to wear
chips and scratches this is the final
third coat I want the table to look
ideal exactly like this this will be the
first art object friends that I will
polish to a mirror shine therefore in
the next video watch the step-by-step
polishing of automotive lacquer mobile
lacquer to a mirror shine applied the
epoxy resin it's very simple friends and
by the way not expensive at all resin
it's very simple friends and by the way
not expensive at all practically no
defects can in principle even especially
if for a dacha and in an apartment in
the kitchen you can leave the table as
is that is unscrew the base and use the
table freely but nevertheless I wanted
to master polishing which I will show
you and I will master polishing
together with you here is the epoxy
all detailed information on where to
buy the resin can be found by the links
in the video description and in the
first pin comment and I would like to
add friends why I coated the epoxy
resin with varnish this is all based on
my experience working with epoxy resin
I have already made art objects and even
well polished the epoxy resin scratches
instantly and becomes mad and unsightly
for this it is imperative to cover the
resin with some serious final coating for
example automotive varnish also what can
be noted is that simply polish resin
with dies often the die fades under
sunlight this means that the final
coating in this case automotive varnish
must have excellent ultraviolet
protection friends who would have
thought but this acacia the workers
simply would have burned it on the
roadside at this point friends we say
goodbye I wish you a great day health to
you and your loved ones and watch the
next video on the channel for a detailed
step-by-step polishing of our epoxy
table coated with MIPO automotive
varnish in three layers have a great
mood thank you very much for your views
have a great mood thank you very much
for your views
