How to Draw the BEST Hyper Realistic Eye Easy Step by Step For All Artists YouTube

Art painting
22 followers
2 Video Views·May 10, 2026
AI Generated·May contain errors
How to draw a hyper-realistic eye. Welcome back. If you're new here, I'm a 23-year-old
charcoal and graphite artist that specializes in hyper-realism with a little bit of surrealism.
Basically, I try to make things look like photographs. I'm literally teaching you guys
everything that I know, so if you want to learn how to draw like this, subscribe.
Here it is, the video you have literally all been waiting for. I kid you not, under every single one
of my videos, eye tutorial, eye tutorial. How do you draw an eye? Eye tutorial next. Eyeball,
eyeball. Literally driving me insane, but that's okay because I know it's like hyper-realism 101.
Everyone loves drawing eyes. The reason that I've put it off until now is because it's such a
hard thing to teach because there's so many moving parts, so let's waste no time.
I'm going to break it down to you into five super easy steps that literally anyone can follow,
but first, you need to know what tools you're using. I'm going to go over every single tool
that I personally use that's over on my workbench right behind me, and then we'll get into it.
Ready? Let's begin. For graphite, we just want typical graphite pencils.
I use the Faber-Castell 9000 series. You'll want three of them to make it easy, a light,
medium, and dark. I like to use 2H as my light, HB as my mid, and 2B as my dark. Any tone lighter
than 2H is unnecessary, and anything darker than 2B should be used with charcoal. For charcoal,
we just want some sort of pencil. I use a General's pencil, preferably the soft variation.
It applies much easier and is the darkest type in my opinion. You also need a charcoal stick
with sandpaper. With this, you'll make charcoal powder by filing down the stick onto a piece of
paper. This is one of, if not the most important tools. Starting off for our erasers, the Tombow
Mono Eraser is used for more prominent highlights with sharper edges, hence the minute tip.
The Faber-Castell Perfection 7056 is used for more subtle highlights with softer edges,
mainly tone and value based. An electric eraser is used for the strongest of highlights.
By pressing the button, the tip spins at a speed that allows almost anything to be erased.
It's a tool that I recommend to anyone, and one that once you have it, you don't really know what
you'd do without it. The kneaded eraser can be shaped to your liking and is great for more abstract,
unpredictable highlighted textures. Finally, the Faber-Castell Dust-Free Eraser is used to
clean up any smeared charcoal. It's not required, but incredibly convenient and I highly, highly
recommend. As you can see, erasers are vital to the detailing process, which is why we have
the most tools in this category. Any sort of makeup or art brush will be used for most of
blending. I personally use the IPC-1 by Dynasty Brushes. I recommend you use some sort of makeup
brush, since they blend the smoothest from my experience. We'll use a blending tortillon for
blending the smaller graphite details. Lastly, a soft tissue, preferably Kleenex, is best when
trying to achieve a very smooth, uniform tone. These three tools will be able to blend anything
we'll ever need. Looking at our miscellaneous items, the Faber-Castell Polychromos Color Pencil
is fantastic at achieving the same dark tones of charcoal in small, hard-to-reach areas where
charcoal cannot get. A white gel pen can be used at the end to strengthen and make the brightest
highlights shine even more. However, it's not necessary. I personally like the Gelly Roll pens.
Lastly, any stiff brush is great for wiping away all those shavings that get in the way.
Again, not necessary, but very convenient. For my sharpeners, I use the KUM Magnesium Sharpener
from my graphite pencils and the Generals All Art from my charcoal pencils. The brand doesn't
really matter though. What matters is that you have separate sharpeners for your graphite and
charcoal pencils because they actually sharpen differently. For my paper, I use the Strathmore
500 Series Plate or Smooth 3-ply. Because of how expensive it is, if you want to use the 400 or
even the 300 series, you can. The most important thing is that you use Bristol paper that is smooth,
not vellum. Vellum does not allow you to achieve the smallest of details like smooth can due to
vellum's tooth. Now that we've gone over every single tool that I use, let's begin. Okay, so as
you can see, we have a four inch by three inch grid here with the eye already sketched out. And
if you want to know how I make my grid and how I get everything perfectly transferred as far as
the sketch goes, I already made a tutorial on that. So I'll put that up here somewhere if you
want to check that out. Now, normally in one of my drawings, whenever I fill in an eye, I do the
entire detail section, which includes the eyebrow. However, I already did a tutorial on how I do
eyebrows, which I'll put up here as well. So if you haven't checked that out already, I highly
recommend it because that is the first piece of the puzzle. This is the rest of the puzzle. Now,
normally if you've seen any of my other tutorials, you know where we start with the base. However,
for eyes, because there's a lot more detail going on here, we're going to start with a little bit
of the shadows. Basically, we're going to fill in just the parts that are pitch black so that
whenever we go in and do the base, we don't lose those parts of the sketch. We're going to be doing
that with the Polychromos colored pencil. So what I'm going to do is I'm going to squint my eyes,
I'm going to look at the reference, and all the parts that are pitch black, I'm going to just
fill them in with this pencil. That's mainly the top eyelid crease right here, the pupil,
and then some over here on the eyelashes. However, do not fill in the eyelashes yet. The eyelashes
are really small, they're subtle, but they have to be the topmost layer for them to be effective.
So hold off on those. That's the only black part that we're not going to be filling in right now.
You can see I'm making a thick bold line. Don't worry about any of the shading right now that has
to do with the dark parts. Just the pitch black, basically, outlines. Now you might not be able to
see it because of some of the eyelashes, but this grid mark right here has a little bit of black.
Make sure you're consistently sharpening your pencil. Make sure you have a very, very fine tip.
These details, especially the details in an eye, are incredibly tedious and small.
So that line right there is way too thick, but we'll even it out later. Now this is important.
Hopefully you didn't start on the pupil or the iris because you don't want to use the polychromos
there just yet. So obviously the iris of the eye is what makes it look so good in a hyper-realistic
drawing. Everyone, your eyes immediately go right here. So that is top priority for the tutorial.
To make sure that we have enough room to add detail and get rid of stuff and put as many
layers as we need to, we don't want to be using a colored pencil because that's really hard to
layer on top of with other different mediums. And once you place it on the paper, it's kind of set
in stone. So we're going to be using just the General's charcoal pencil for all of the darks
in the pupil and the iris. So I recommend just outlining the iris. Now if you want to bring it
in a tad bit, you can. Make sure you go all the way around. Bring that dark line in sporadically.
Now make sure you do not fill in the glares from the lights. Those parts are incredibly important.
And I know I say we can always just go back with like an electric eraser or a white gel pen and
that's kind of worst case scenario in this instance. So if you already did it, it's fine. But just like
that's good enough. Now this whole area over here is basically just pitch black from the eyelashes
that are bunched up on the end over here. So I'm just going to fill them in, but I'm not going to
be doing any of the detailed eyelashes that are kind of coming up and standing out. I'll be part
of the detailing process, which we will work on later. So kind of just stop when you get to the
point where you're going to be, you know, pulling and making the eyelashes. We're just filling in
like the bulky area of it. Okay, there we go. We got the blacks in place. Okay, now we can go back
to the base. So what this is, we're just going to be focusing on getting the tones in place where
they need to be. No detailing whatsoever. We're literally just going to be using our brushes that
are dipped in charcoal powder. So I'm going to grab my smaller brush. I'm going to go over here,
dip it in the charcoal powder, and we're just going to match the tones, fill in all the blank
space. Let's start with the upper eyelid. You can see the shadow that's kind of coming
up off of the dark line that we already made. Go over top, color in. If you accidentally go
out of lines or you make it a little scratchy, that's okay. We're kind of just getting like a
To avoid streaks, I highly recommend going in a small circular motion.
Now one thing you're going to see me do a lot is use the dark spots that we already have in place
almost as like a deposit of charcoal. So like right here, I'm going to take this. I'm going to
pull it to get some of these darker tones around. I know it kind of just sets us back a little bit,
but honestly we did this step so that we wouldn't lose where our grid and our sketch lines are.
So it's pretty inevitable that we have to go back and fill those back in.
So honestly, don't be afraid to use them as your charcoal powder.
If you're ever unsure of how dark to make something, I always say do the squint test.
So basically just squint your eyes and look really quick back and forth between your drawing and the
reference, and you will immediately see what needs to be darker, what needs to be lighter.
Super simple trick. Everything should be blended to some degree. Even if something looks like it's
just a sharp line. Just to be safe, go ahead and blend it anyway. Now we're going to lighten this
whenever we get to the highlighted details area. In super detailed areas like right here, just do
your best. If anything, just fill it with one uniform tone and move on. Anything that's like
mistone, we can just fix in the detail stage. Swipe over to my bigger brush because this is
the big section that's pretty uniform. Remember, don't try to be super streaky with it. Go back
and forth. It looks so much better when you go in a circular motion instead. Now just preference,
I like to get everything around the eye shaded in first and then move on into the eyeball.
This is by far the most important step. If you don't get the tones right, no matter how good
your detailing is, the whole thing is going to turn out a little wonky. So if you need to spend
the most amount of time on a certain step, make sure it's this one. Now I know it's super bright
on this lower eyelid down here, but you still need to coat it with some sort of tone. So just
slightly go over it. Okay, now we're going to move on to the white of the eye. This is going to be a
little different as far as the steps we're going to take to get it done. However, it does start out
with just the same normal shading for the base. So just continue what you're doing, but if you can
be a little lighter, really, really cautious about your streaks, do it here. One of the biggest things
that people have issues with or when they look at their eye drawing when they're done and they're
not happy with it because it looks a little too unrealistic, it's mainly because they leave the
white of the eye white. Now I guess that makes sense. You would think to do that because it's
called the white of the eye, but it's technically not white and you don't want to just leave it the
white of the paper. That's literally the worst thing you could do for it. So if you're hesitating
to add anything to this or you're thinking to yourself, well my reference is fine as it is,
please for everyone's sake tone it down just a little bit. You will 100% thank me later.
Now here is the one thing that makes your eye stand out amongst the others and it is shading
outward on the iris. A lot of people like to have this distinct line that separates the white of
the eye to the iris. Now you do want a sharper line there, but first you need to fade it out.
What I mean by that is I'm literally with the brush I'm fading it outwards into the white of
the eye, just ever so blending it. Pretend you're drawing the outline for the iris again,
but with the brush. See I went out a little too much right there. That's fine. Now for the iris
itself you really want to pack in some charcoal in there to make sure it's darker. So I applied
some charcoal to the tip of my brush and I'm really going to fill that in. Make sure to avoid
the glare. You want to keep that in there. So try to just work around it if possible. Now if you
overlap a little bit, that's okay. No big worries at all. Really get that almost outer glow on the
iris going. Dab along the line. Now I made that a little too dark right there, but we'll fix it.
Now like I said earlier, the white of the eye is a little different. It's a different texture than
everything else. It's glossy, it's slick, it's shiny. So we don't want to just leave it like
that because right now it just looks like an extension of the skin. They have the same exact
texture. So what we do is we grab our smoothest blending tool, which is a tissue, and we're going
to just wrap our finger up. We're going to smoothen out the white of the eye. Now this does pull
charcoal off of the surface, so if it makes it too light, you're going to have to go back in again
with the brush and then go back in with the tissue and vice versa, back and forth, back and forth,
until you get the right tone. But this is one of those textures that we have to nail. Now I'm also
going to be going back in with the charcoal pencil and filling those back in as we go. As you can see
over here, we lost a lot of those darks and not only that, but it helps put some charcoal on the
paper that we can then use for everything else. So now we're kind of just combining the last two
steps. We're going to be darkening the darkest areas and then blending out, getting those tones
correct. You can see I had some charcoal up here along the upper eyelid. That's just because I
really want to get that darker kind of fading out, and the polychromos doesn't really give that
effect. So if you need to go add that, you can. Now this is kind of a judgment call. When you feel
like you're done and you want to move on, you can. If you accidentally mess up pretty bad like I just
did right there, just grab your Perfection 7056 and you get right back into it. Okay that's good
enough for now. Now we're going to move on to the shadow details. Basically all the detail work that
involves making things darker. You can use a lot of different tools here, but primarily, at least
for now, we're going to just be using the graphite pencils. The darkest I'm going to be using is a 2B
and the lightest a 2H. So what this includes is all the cracks, crevices, sharpening of edges, all
the detail that goes on top of the base. So for now, let's start with some of the skin detailing. Down
here we have some cracks. You see I drew in that crevice there. Then you can mess around with the
tones as well. So now that I drew this in, I know exactly where it is. I can then do a little
darkening along the edge, toppling that darker tone up forward. Now I forgot the last step, the base.
100% perfect. I wouldn't need to do any of that, but I'm assuming that both me and you did not do
that. So you're going to be doing a lot of little detail work and then helping them blend in with
the base a little bit. Now the good thing about this is that skin is an organic texture, meaning
that it is different for everyone, everywhere. So you don't have to get this 100% perfect. You don't
have to count every single crease. You don't have to be that tedious with it. So areas like this, where
I'm filling in all these little cracks, I'm really just making up as I go. I'm having fun with it.
Just get into a good rhythm and run with it. Do not stress yourself out on making it perfect.
So down here, I'm using just an HB pencil. You want to make sure that you're using a tone of
graphite pencil that corresponds to the tone of the part that you're working on that you already
fill in with the base. If I'm going to be working in a darker area, like up here, I really don't
want to be using graphite to begin with. But if you want to try it, you should be using a darker
tone like a 2B, 4B. And then when you're working in a very light area like right here, you want to
be using a lighter tone like a 2H. This is all entirely new to you and you want to make it as
easy as possible. You can just use an HB. That is the middle ground. That is the basic number two
pencil. It will work. It just won't look as three-dimensional as you might hope it would.
It's gotten to the point where I am full-on just freestyling it down here.
You can also use the graphite to soften edges like I just did right here on this little
out-of-focus corner back here. And then obviously when you want to go as dark as you can, pull out
the polychromos. Make sure to darken your lines that you made earlier. I know this one didn't
look like it got lighter, but it does. I promise. So I'm going to make this darker and I'm going to
also pull out a little bit. I'm just lightening how hard I'm pushing. To add some blemishes or
some softer spots, you can use the tortillon to go in and just make sure you get some charcoal on
the tip. And then just go in and you know add some blemishes, some off spots. If you want to learn a
couple different techniques on how I do that, you can check out my last tutorial. I'll also put it
up here. Now you can see there are some creasing detail on the upper eyelid right here. And a lot
of it is whiter, meaning that we're going to be using the highlight details to finish that part.
But if you want to just kind of mark your area, you can do what like what we did down here. Make
sure you grab a darker pencil. Create some grooves for those highlights to sit in. Let's take a break
from the skin detailing for now and move on to the iris. We're just going to do all of the dark
details in it. So first obviously I want to fill this back in with the black. Now let's sharpen
some of those edges, primarily around the glare. I'm going to take the polychromos. Now a lot of the
detailing in the iris and the pupil is eraser work, so we're going to have to hold off to do all the
really fun detailing until then. I know, I know. And then once again to make it a little softer,
blend out some of this. Now you want the iris outline to have a sharp edge but also fade in a
tab. So what I'm going to do is I'm going to take the polychromos and just blend it ever so slightly
and then go back over with a sharp crisp line. So we kind of get the best of both worlds.
If you need to make that edge a little softer you can take the tortillon. The tortillon is great at
getting the soft feel to it. Now normally for these videos I like to make it as easy as I can,
break it down step by step, but when you're working on these in real time, to be completely honest,
it's not really like this. Especially for me whenever you kind of have this down subconsciously
by memory at this point. So whenever I say break it down by the base, shadow detail, highlight
details, reinforce, I do follow that but I do it in its own little sections. So I'll do like this
little section right here. I'll do all four of them and sometimes I do like two steps over here
and then I find a spot over here and I get sidetracked and I work over here and do all
four steps and then I come back. It's a little disorganized when I do it off camera by myself.
So if some things don't really make sense I really try my best to break it down and do all the base,
all the shadows, you know everything for each step. So if I'm bouncing around I'm sorry that's
just how my everyday drawing cycle is. But we've reached a point right now where it's really tough
to do anything without adding some highlighted details. So we're going to stick inside the iris
and get that completely done for you guys because I know that's what we're all been waiting for.
So let's switch over to the next step which is the highlights and then we'll just have to return to
some of the shadow details. The shadows and the highlights bounce back and forth, back and forth.
What we want for this step is the mono eraser, the perfection 7056, and then the electric eraser.
So let's start with the mono. Make sure you have a very fine tip cut and then we're going to add
all of those little lines and highlighted areas that are in the iris. So you can see like around
here we have those dotted areas. Again the great part about this step is that every iris is different
so if you don't get it one-to-one no one's ever going to know. Unless you're doing a commission
then you kind of have to get it perfect. Adding those and if you can't get them as bright as you
want we're going to go back in with the electric eraser that's what that's for. But honestly I'm
just going to add some of these really thin lines making them more apparent here closer to the pupil
and then I'm just kind of fading them out as I get to the edge. While this is really tedious I'm going
to grab the electric eraser sharpen it so I have a really sharp edge. I'm going to go in and add
that highlighted ring that's almost like it's around the pupil. Now to get a soft pull from
the iris and get some just in general lighter areas a lighter background you can use the
perfections what I'm doing here. This tool is used for a lot of these softer highlights that you kind
of just don't really have defined edges. Much much more forgiving. The mono is for the sharper edges
the more tedious sharper edge highlights and then the electric eraser is for the brightest of the
bright highlights. And speaking of it let's get these glares ready. I'm just giving them distinct
lines. I'm going to go back and this is really just going back and forth until you like it.
Adding in all these random lines pulling random spots. I can't really guide you too much through
this because everyone's is different. Just make sure you leave a nice black ring around the iris.
Don't make it too sharp make sure it kind of fades in and out. See like this is way too sharp right
here it's almost like it stops. So what you do is you grab the polychromos bring it in up against
certain lines almost if it's like breaking through and even breaking through in the opposite manner
by taking some of the highlights and pulling from the edge. Now we're not done with it but we're
going to move on to some other highlights because like I said I want to try to do all the steps at
once. So we're going to go back and go back and forth between the shadows and the highlights in
the reinforce stage. So let's just go from there from the iris and move outward. Sticking with the
white of the eye there's this little water like really tiny lake that goes along the bottom eyelid.
You never want to forget that. I'm just going to add it in right now with the electric eraser. You
have to have a really steady hand for this part. That is just not that good but it's okay we can
enhance that later with the white gel pen. Now you can see we very much need to brighten some parts
of the white of the eye especially just around in here. So we're going to take the smooth eraser
the perfection and really small circles just pulling as softly as I can and then to hide any
streaks that I left with that pencil which I tried to be as soft as I could but let's face it
there are definitely some streaks on there. Just flush them out with the tissue. Sticking within
the eye I'm going to grab my electric again and we're just looking for any places that need erased
basically any details that you could do with an eraser and immediately I see in the corner over
here those really strong highlights. We're going to add those and we're just going to keep on going.
So let's go over here you can see that there are some in this little crease. I'm just going to dab
with the electric eraser and work my way up. There are a couple lines over here. Now like I said the
electric eraser you really only want to use it whenever you are working with the strongest of
highlights. Ones that have a clear cut edge. Stuff like what we just did right here but working up
on the eyelid these are stronger highlights but they're not strong enough to be using an electric
eraser. So we're going back to the mono which is just one step down from the electric eraser
because it still produces sharp edges. We're going to go in between these little craters that
we left with the shadows and just erase. Now everything I'm saying is subjective to whatever
reference you're using. I'll link the reference that I'm using down below. I found it on unsplash.com.
It's a website where you can get copyright free photos that are 100% free. So shout out to the
artist that I got this from. I will link you down in the description. Really appreciate it. So if you
want to look for copyrighted images you can check there but I highly recommend to every new artist to
use your own references. It's a great habit to get into. One that you definitely need to at some point
probably sooner rather than later. Okay now that we got these lines done we don't want to just
leave them like that. I also want to just bring this area up a little brighter. And I know you
can't see them because they're going to be covered by the eyelashes but you still want to add just a
little bit of texture back here. Even if it's just little squiggles like I'm doing right now.
And the same up here to add the skin texture up here. It's just eraser work. It's very subtle.
So I'm just going to very lightly kind of do like a flicking upward motion. It's going to add a
unique skin pattern that kind of looks like some peach fuzz. Kind of looks like some cracks. Just
work our way down to an area like right here. I'm going to lighten it base wise and I'm going to go
with the electric. Add the little squiggly highlights. Then I'm going to keep going
under. We have more right here. So just fill those in. Then moving under we have another
bright spot right here. Now I know we don't have the eyelashes in place yet but you can see all
those white circles that kind of start and then finish right around here. I'm going to add those
in now. You can do them before after eyelashes. It doesn't really matter. Now those are a little
abrupt so again I'm going to go in with the perfection. So one of the first things I see when
I look at this eyelid is that it has a nice light line with soft edges that goes from here up to
here. So I'm just going to add that in. It helps distinguish between the white of the eye and the
eyelid. Might be a little too bright. We'll fix it later. If you're ever stuck and you don't know
what texture to put on just grab the perfection and just do little squiggles very lightly barely
touching the paper. It's what I'm doing right now. It works 10 out of 10 times. So now we're
going to do all the little highlights down here. It's basically filling in the spots in between
those creases that we did with the shadows. So you don't even really need your reference for this
part. Just grab your mono. Sharper edge. Also it's really important that you go in between all the
ones that you already made but you also want to make new ones as well. So like this I'm just going
to create some squiggly lines adding just like a rough texture to it. Make sure to snip the tip
of your mono every so often. If you're not getting the sharper edges if you're working with really
lighter skin like I am right now you can use the electric eraser and go in and get some of those
highlights. Make sure you don't overdo it though. It's really easy to overdo it with the electric
and when you do overdo it it doesn't really look that good. That looks a lot better. So yeah it just
depends on your reference which eraser tool you want to use a more defining one or a more subtle
one. Now if you want to get really in depth with this skin texture that's down here I actually do
have multiple skin tutorials that really hone in on how to get this type of skin texture. So if you
feel like I'm barely going over it and you want to learn more about how I texture skin really quickly
and as easily as I do and it kind of look as good as it does you can check out any of those tutorials.
I know I keep referring you to other videos but I do a tutorial like every other week. So instead
of trying to just keep explaining myself over and over it's kind of easier to let you go pick what
you want. Now let's pull out a tool we haven't really used yet which is the kneaded eraser.
This eraser is only used for the most abstract of textures that you don't care what it looks like
and a lot of that is out of focus work. So you can see down here we have a lot of out of focus
skin texture. Honestly we're just going to shape this into a finer point and then go in and just
dab move it all around. You can see it creates a texture that I can't predict but it looks good
and it looks out of focus. I'm going to do it a little over here and why not we're going to go
over here a little bit. Okay let's switch over to the shadows again and let's finally get the
eyelashes out of the way. You want to be using the polychromos because it is the darkest and
sharpest tool that we can use. Please unless you have like blonde eyelashes you do not want to be
using a graphite pencil. It's just not dark enough. Make sure you sharpen it to as sharp as you can
and then honestly you're just going to go to the root or the base and move outwards while you
soften how strong you're holding it. As far as looking at the reference the only part you really
should care about is how long they are. Sometimes you get carried away and you make them way too
long. Sometimes you make them way too short. Don't count them and try to make every single one perfect.
You can kind of make them up as you go. Just make sure that they are at the appropriate length.
That's really all you have to worry about. And then actually to make some of the skinnier more
faint ones you actually want to grab the graphite pencil because it can actually get sharper than
the polychromos and add some of those filler ones in there just to kind of fill in the space.
You can also use it to get some of the out of focus ones back there by just kind of coloring
them in pretty softly. Also if you need to extend any of them make sure you use a graphite pencil
for that. Moving up top you want to make sure you're paying attention to if any curls. So like
right here there's one that curls down below and then goes up. Or there are some that just go up.
And same rules apply. Just make sure you know how long they are. Just one at a time.
Okay we are going to return to those but when we go back to the highlights. For now let's add some
of those veins in the white. We're going to be using the absolute lightest shade possible which
is the 2H and I'm going to start with some of the ones that are coming out. You can't see them that
well but some of them do come out of the iris. Again we're just drawing little squigglies. You
want to change the weight of the lines or just how hard you're pressing down. You can make them
as bloodshot as you want. You can add one vein. You can add none if you want. Make sure you have
a super sharp tip for this and then make sure you draw a distinct line above that little river that
we made. It just helps it stand out more. To get some of the veins in this really dark area here
you can use the polychromos. Make sure you just don't press down too hard. Now I see some spots
over here that I missed as far as just shadow detail goes. Okay I'm going to grab the polychromos.
We're going to add more detail in the iris creating some dark lines going up against
some of the highlighted lines and then one thing people always forget the reflection in the glare
of the eyelashes. Now you want these to be as dark as possible but it's such a tiny detail
that I am going to switch over to graphite just because I can get the tip sharper.
Some of those little details in there. I'm just going to use a tortillon and boom. Okay now
switching back over we are now in the reinforce stage. I probably should have said that earlier
but now it's basically we work on either a shadow or highlight and then we switch over to the other
one to reinforce that and go back and forth so that they complement each other to the best of
their ability. So like for instance now we're going to switch over we're going to go back to
the erasers and we have the eyelashes already but we want to add the little tips that are on
them. I don't know if you notice those but a good bit of them have a little bit of like blonde tips
to them or some highlighted roots or something like that. I'm just going to use the electric
eraser because it is the sharpest. Swap back over. I think I actually like the mono more.
For the out of focus eyelashes make sure you're using a softer end like the perfection.
Also make some eyelashes that are just only eraser. Adds a cool little texture to it.
You can also use the mono to add some peach fuzz up top. Now honestly the last step is touch-ups.
If you want to be done right here you can be. If you're happy with it good for you we're done.
I'm going to look back and forth between my reference and my drawing because there's
definitely spots I could touch up make better. Basically just look really quickly between the
reference and the drawing. See what you think needs improved. Tinker with stuff. Spend a little
more time on a skin texture that you're not familiar with. Now's the time now that we have
pretty much 99% of it done. Now you can really try to practice on some of these skills that I've been
teaching. Once we're done with that we'll move on to the final final step. I forgot to do these over
here wow. Oh a detail I forgot to note for the eyelashes. You can see at the root it looks like
they're just floating there. You really don't want that so I recommend grabbing a graphite pencil
and just doing a little faded dot at the base or the root of every one of these. It just makes
it look like it's going into the skin rather than just kind of floating there. I don't know
it's optional. Okay the very last step is adding the white highlights with the white gel pen. You
don't have to do this if you're one of those people that think if it's going to be a graphite
drawing and a charcoal drawing or a charcoal drawing it should just be that. Don't mix any
other medium that's fine. I always think that if there's a way to make a drawing look better
why put those restrictions and rules on yourself. There's no point. So basically we're just going to
dab the white acrylic paint on the strongest of highlights to make them pop a little more.
Now it's going to be just places like around here maybe a little in here. Definitely some up here.
Those work left to right. So over here there's some spots. Now this is a very subtle texture.
It's a step you really don't want to overdo because it looks really bad if you add too much.
So like spots up here you just want to put the white gel pen on the very tip top the crest of
the area. You don't want to just fill this whole thing in with the white because then it doesn't
really make it stand out. It just doesn't look that good. Definitely this little river we made.
Like down here you don't want to fill in every single one. Just here and there. Make sure you
add just some dots along the lower eyelids. And there you have it. How I draw hyperrealistic eyes.
Hopefully that was somewhat easy to follow. The main things you really need to just remember
and put in the back of your brain is that the white of the eye is not actually white. You want
to shade it softer than everything else. Preferably with a tissue. You want to have the edge around
the iris both soft and hard at the same time by fading it out and then coloring over it again.
Eyelashes go towards the end instead of the very beginning. People get really excited and want to
put them in really quickly at the very beginning. Don't do that because they need to kind of go over
top of them and it makes them look muddy. But definitely like a final step. This is definitely
not one of my better eyes I've drawn so I apologize. But I think you get the gist of it.
That is my thought process and how I draw hyperrealistic eyes. There you have it. How I
draw my hyperrealistic eyes. I hope you enjoyed the tutorial. Hope you found it useful. Let me
know down in the comments what you want to see next. If you want to see daily content from me
and just keep up to date with my original drawings you can head over to my TikTok and my Instagram.
If you want to purchase limited edition prints of my drawings or even the originals of my drawings
head over to my website. If you want to take things one step further and get these tutorials
one week early and also get one-on-one feedback from me about your art head over to my Patreon.
Last but not least please consider subscribing and liking the video. It means the absolute world
to me. I want to keep making these videos for you and I need all support I can get.
I think that's it. I appreciate you being here and hopefully I see you soon.
