10 Essential Cross Hatching Exercises

Art painting
22 followers
290 Video Views·Jun 23, 2026
AI Generated·May contain errors
Welcome to my messy studio, everyone. My name is Mark, and I'm an artist and an art professor,
and in this video I'm going to show you the 10 most important exercises you can do to improve
your ability with crosshatching in pen and ink. These are things that I recommend for the complete
beginner and to those who already crosshatch pretty well but wish to hone their skills.
This is going to be a condensed primer of sorts, where I talk about these exercises
in a very concise way. However, if you'd like to see a more detailed explanation,
my class called The Fundamentals of Crosshatching, The Six Basic Strokes,
is available for purchase through Vimeo. Let's get started.
The first exercise is to learn how to put down consistent hatch marks, meaning that the distance
between your lines should be the same throughout. Now, those lines could be more widely spaced
or more closely spaced, but whatever setting you have, you want to keep it the same all the way
through. So, that's something that takes a little bit of practice. You want to learn how to put down
consistent strokes in every direction. You can practice short strokes. If you want to practice
longer strokes, you can move your hand a little bit farther back on the barrel. That's going to
your strokes a little bit longer, like so. And you should also practice curving your strokes,
so putting down strokes that are more C-shaped, like this. Going this way, going the other
direction, different curvatures, different lengths. Again, the most important thing is to set your
gauge and keep it the same all the way through. If you're not comfortable doing this, fill a
and I guarantee that by the end of page three, you'll be doing this. The second skill is a little
bit more complicated. You want to learn how to create soft and hard strokes, meaning that
when you create soft strokes, those strokes are thin at the beginning. They thicken towards the
center and thin out again, which creates a soft edge in your hatch area, allowing a transition
from one value to the next. This is called a soft stroke. The way it's created is by putting
down the stroke on the move. I'm hovering my pen over the paper, and I start moving the pen.
I place the pen on the paper, and then I lift off like this. That's a soft stroke. Hard strokes
look like this. I put the pen down on the paper, I make a mark, and I lift off, which creates an
start and an abrupt finish to the line, creating a hard transition from the hatch to the paper.
Soft strokes are used when you want a soft transition from the hatch
into another value. Hard strokes are when you want a hard edge to your hatching area.
You need to learn how to create both. These are two very important stroke types. Again,
if you're not comfortable doing this, fill a couple of pages with soft and hard strokes,
and again, by the end of page three, you'll be doing this no problem. Again, practice different
lengths, different directions. You can also practice C strokes, curved strokes.
Exercise number three is to practice creating gradients, value scales. So this requires you
to put down several layers of hatching to go from light to dark. You want to make sure that
every time you put down a layer of hatching, number one, you keep the gauge consistent all
the way through, and that you change the angle at least 15 degrees. Now, as you go darker,
don't change the gauge, don't narrow the line distance, but you can darken the line. So here,
I can make a lighter line, and then here, I can put down a darker line. That's going to allow me
to go darker without making the hatch marks more dense. So the next angle might be this.
Next hatch angle might be this. Next hatch angle might be, let's put down one a little more
diagonal going this way. And ideally, you should be able to go all the way light, all the way dark
with no more than four or five layers. Again, we can keep the lines lighter here, thinner here,
darker towards the darker side, but don't start changing the gauge. This is a very,
very important principle. Whenever you're hatching, regardless of whether you're drawing
something far away, light, or something close and really dark, the gauge, the distance between the
hatch marks, needs to stay even all the way through. This is an important element in creating
the illusion of value. Once you start varying the gauge, then you start focusing the viewer. It's
going to start focusing on the hatching itself, and you're going to lose that sense of illusion.
Exercise number four is to create an even field of hatching. One of the problems with hatching is
that your lines are going to be relatively short. So if you need to fill a large area with hatching,
you need to learn how to connect your hatching areas together. So we put down one layer,
and then we need to fluidly transition from one area to the next. The key here is
to have the hatch marks overlap just a little bit. I'm using the soft stroke here,
and they're kind of intertwined and connecting into each other. So even if they don't exactly
line up, you still get a relatively even field of hatching. Practice straight strokes,
and also practice connecting curved strokes together. So we can create a little wave
texture going this way. Again, a little bit of a tricky skill, because you want to make sure that
the hatch marks don't overlap too much, creating a darker pattern, or separate out, creating a lighter
gap in your hatching. That's skill number four. Once you're comfortable with these four basic
skills, you've filled a couple of pages with hatching of a consistent gauge, your soft and
hard hatching, a page filled with gradients, a page perhaps filled with connected areas of hatch,
then we can start working on rendering your three basic shapes, your cube, your cylinder,
and your sphere. The reason why it's important to render those three basic shapes is because
just about everything that you see in nature, whether it's trees, the human form, of course,
architecture, interiors, is composed, can be broken down into those three basic shapes.
So once you have a little bit of skill in rendering cubes, rendering cylinders, rendering spheres,
you can extend those skills to just about anything you draw. So let's start off with a cube first.
I'm going to pull up a reference here. And by the way, if you need a little bit of assistance in
drawing cubes, I have some tutorials there for you. There's a few things you need to know about
the differences in the angles of the cube. You can also indicate a little bit of the cast shadow.
Okay, that looks pretty decent. Let's start sketching it in. One thing you can practice
in the cube is varying your line quality if you have a pen that's capable of it. So the lines
here are going to be a little bit lighter. And then as I'm working towards the front corner,
you can thicken the lines just a little bit. That's also an important skill.
You can lighten the lines going this way. Okay, now let's hatch this cube. The great thing about
hatching a cube is that you don't really have to think about the hatch angles. They're kind of
given to you. So for example, we have a shadow on this side. We can start off with a hatch mark
that runs from this corner to the other, like this. So let's start with that hatch angle. So
it's going to run this way first. Again, keep the hatching consistent. And then part of the
difficulty of hatching this cube is that we need to practice both hard and soft stroke types.
So here I'm going to start off with a hard beginning, and then it's going to end soft.
Why? Because we need to connect this hatch mark with the first layer we put down, like so.
Next hatch angle is already suggested for us. We can start with a vertical hatch.
Okay, I'm going to try to keep my hatching consistent. Not always succeeding. Next hatch
angle could be diagonal going the other direction. So we can run a diagonal running this way.
Let's do it here. And I can see that the cube is a little bit darker towards the top
front corner. So I'm going to make the lines here a little bit thicker,
keep this area a little bit lighter, and then it's getting a little bit darker here as well.
And the next hatch angle is, again, already suggested to us because we have a plane
going this way. Now one thing to recognize is that the angle here and the angle here are not
quite the same. The bottom angle is a little bit steeper. Why? Because the cube is receding,
shrinking as it's going back in space, so that eventually these two lines converge. However,
that's not something I need to respond to in my hatch angle. So I'm not going to start hatching
and shifting the angle as I go down. That's going to make the hatching messy. So choose one of
these. It's either this one or this one, and stay with it all the way through. We can apply a hatch
angle this way a little bit, and hatch angle going this way. Okay, something like that.
And then for the top plane, we can choose an angle that runs this way, more horizontal.
Let's say like this. We can also render the cast shadow. Since the cast shadow sits on a top-facing
plane, we want to put down strokes that are a little more horizontal. Once you render one cube,
then you can practice a few different rotations. So rotations where you see more one side than the
other. That's really helpful. Different tilts, different light directions. So I recommend
getting very comfortable with drawing cubes of different tilts. So more downward facing,
more upward facing. And then, again, you can extend that skill to just about any cuboid
rectilinear shape. All right, let's talk about skill number six. After you've rendered the cube,
then we can try a slightly more complicated shape, a cylinder. Again, one of those other shapes that
is often seen in nature, in trees, in the human form. So I've got a little cylinder reference
here that I've pulled up. We can also draw a little bit of the cast shadow here. And then
I'm also going to indicate where the shadow is. That's very, very important. Okay, one of the
difficulties with rendering a cylinder as opposed to a cube is that in a cube, the hatching angles
are suggested to us by the clarity of the plane. So we can go this way, clearly. We can run a
diagonal from corner to corner. We can go this direction if we want. Whereas in the cylinder,
we have lots of curving shapes. And really, the only hatch angle that's clear and suggested to us
is the one that runs across like this. So we can follow the curvature here and run curved strokes
all the way across. But what if we want to change angles? Well, here is the most important thing to
keep in mind with cylinders. If you run a line across the cylinder, then that line is going to
contour the shape on top or the bottom. So we have a curve here, and any line across is going to have
the same curvature. If we start running lines at more diagonal angles, the curve starts to flatten
out. So you can see that the curve is a little bit flatter. The more diagonal the stroke,
the more diagonal the hatch mark, the straighter the line is going to be. So here the line is just
gently curving a little bit straight. And then obviously, if we have a line that's perfectly
vertical, like so, then it's going to be straight. So we can start off with a 45 degree angle.
So that's going to be something that looks like this. And put a gentle curve to it. So that's
going to be a curve that runs this way slightly. And I always start off with something approximating
45 degrees because that allows me to put down hatching in both directions. So from there,
I can go more horizontal and more vertical. It gives me options to go both directions.
Though in this case, really, it doesn't matter what hatch angle you start with. It really doesn't.
This is not something that you need to obsess over. What is the correct starting hatch angle?
It could be anything you want. And really, the reason why I start with 45 degrees,
other than it's sort of in the middle of all the different hatching directions,
is because it's easiest. It's the one that's more natural for my hand to do. Why do I go this way?
Well, because my figures are more naturally inclined to hatch this way than the other direction,
which is a little more awkward. So let's put down hatch marks that are more or less diagonal and
gently curving. The next hatch angle can be a little more vertical. So those lines are going
to run a little bit straighter. The next hatch angle could be more horizontal. Those are going
to curve around my cylinder. Those are going to be very curved this way. If I want to shade the
top plane, really, I can choose anything. But again, for top planes, you want to choose angles
that are close to horizontal. That's going to give a stronger impression of flatness,
of top-facing-ness. If we put down vertical strokes on a top-facing plane, they're going
to turn into something that looks like it's upward tilting, or like grass. And of course,
we can also render the cast shadow. That's a top-facing plane. So we're going to choose
angles that are more horizontal for that. Once you've rendered your first cylinder,
I recommend doing a few more with different light directions and different tilts before
moving on to the next exercise, which is to render a sphere. So I have a sphere reference
in front of me here. Let's pencil it in, draw in the cast shadow, maybe even find the light
direction, and render it. Applying crosshatching to the sphere can be a little bit complicated
because, really, if you want the hatching to be form-following, we need to constantly keep
changing the curvature of our strokes. So the strokes here need to be curvier than the strokes
here. The problem with that, the problem with changing the curvature of the strokes,
is that it can make your crosshatching very, very messy. So, really, the key is to pick a curve
and to stay with it all the way through the drawing. So I'm going to apply form-following
sort of. Then I'm going to change my angle and apply strokes in the same curve. Again,
this is not entirely correct because if the strokes were fully form-following, then the
curvatures are going to be different, whether they're laying at the center or at the edges of
the sphere. However, again, for the sake of hatch consistency, so that we don't break the illusion
of hatching being value, we're going to keep the strokes the same. So now we can start going a
different direction. Again, keep the curves the same. It'll be close enough. Now we can extend
a little bit of halftone to get a little bit of a softer transition from the shadow to the light.
We can put down a few different angles, of course. So let's see, what angle haven't we done yet?
We haven't done this angle. Again, the key and the trick is not to repeat angles. Not that that's
always illegal to do. You can do it sometimes, but it will make your hatching messier. Once you've
rendered your first sphere, then I recommend doing a bunch of spheres with different light
directions. So backlit, toplit, so you're comfortable rendering spheres from different
light angles. Then we can move on to exercise number eight. Once you're comfortable rendering
the three basic forms, we can start combining them together, because most things in nature
are combinations of different forms. So for example, the forearm. The upper half is more
egg-shaped, and then it turns more blocky towards the wrist. So practicing combinations of different
shapes is also very, very useful. So let me bring up the reference here. So here I have a combination,
two different forms, a sphere and a cube. Let's work a little bit smaller to get everything to
fit on the paper. These angles need to be a little bit flatter. Again, I have plenty of tutorials for
you on rendering these basic forms. By the way, also on how to render a cylinder, how to render spheres.
They're all in my beginning drawing playlist for you guys to access. Okay, let's indicate the light
break here. There's a little cast shadow here, there's a cast shadow running this way, and I am
ready to render. The lines here should be a little bit lighter, and then as things get closer, thicker
line quality. Okay, and ready to go. Which form do you start with? Completely up to you. Again, for the
curvature, the same all the way through, even though that's not exactly form following. Trying to
change the curvature to correspond with the curves on the sphere is a recipe for disaster. You're
going to make a giant mess of things. Don't do it. Okay, so again on the sphere, the direction of the
hatch has already been indicated by the angles on the plane. So we can go this way, we can go this
way. Again, I usually start off with the most comfortable angle for me, which is the diagonal
running this way. The trick here, again, is to keep the gauge of the hatch consistent all the
way through, which is tricky. We have different kinds of hatching, curved hatching, straight
hatching, and yet we want these objects to feel like they belong to the same hatching universe.
We want them to speak the same language, and the most important part of that is consistency of
hatch angle. I think one of the keys with rendering multiple objects is to hatch a little
bit everywhere all at once. So develop the image all together, as opposed to working on one object
and then moving on to the next object. This is a principle that applies to lots of different
kinds of media, to oil painting, to watercolor. Working on objects in isolation is usually
a recipe for some kind of big mistake, which you only realize once you have all the objects
rendered. So again, we have a top-facing plane here and the cast shadow. The angles here should
be closer to vertical. Don't forget about the cast shadow. So once again, once you have your first
drawing, then try a few different light angles, different rotations, playing with light direction.
This is an important exercise where you're building up the complexity. You're starting
off with simple shapes, and now you're combining them together. By the way, another combination
could be a combination of the cube and the cylinder, or the cylinder and the sphere.
Let's move on to exercise number one. Again, we're always increasing the difficulty of the exercises,
and the next shape I'm going to do is what I call the snowman, which are two spheres,
one sitting on top of the other. The reason why it's really important is because, particularly in
the human form, you often have one shape sitting on top of another shape, one muscle sitting on
top of another muscle, the neck sitting on top of the chest, the head sitting on top of the neck.
Things kind of stacked one on top of the other, and that interaction between simple forms needs
to be practiced, because in a situation like this, you have a very, very commonly found shadow pattern.
We have a shadow on the sphere itself, which is called a body shadow, which you can tell it is
because it has a soft transition, and then the sphere casts a shadow here, and that cast shadow
flows into a body shadow. So this alternation between soft edges in the body shadow, sharp edges
in the cast shadow, transitioning into the soft edges of body shadow, is something that's very,
very commonly found and needs to be practiced. Again, we're dealing with round objects here.
Keep the hatch marks the same. But again, the tricky thing here is to make sure that you're
maintaining the transition between the sharp-edged cast shadow here and the soft-edged body shadow
here. We need to maintain that because if you treat all shadows as soft, you lose the sense of
form, and obviously if you treat all the shadow edges as hard, then that's going to prevent this
object from looking like it's round, like it's spherical. Again, always helpful to put in the cast
shadow of the object as you're drawing the object itself. Don't let your cast shadows be afterthought,
something you put in towards the end of the drawing. Do it maybe not quite at the beginning,
but definitely not towards the end. Okay, now we need to put in the cast shadow here.
We're using hard strokes here to make sure that the edge is sharp. The tricky thing with spheres
is that we're applying curved strokes in a bunch of different directions and trying to make sure
that the angles are different with every single stroke you put down. That can be a very, very
tricky thing. Okay, let's put down one more value for the cast shadow. Okay, cast shadows, top-facing
planes, that means we put down hatch marks at a more diagonal, more horizontal angle. Okay, now we
can extend a little bit of the halftone. Let's go a little bit darker here. Okay, really important
shape. So once again, once you've rendered your first one, then I recommend trying this shape with
a bunch of different directions. And by the way, I made this shape out of a little bit of modeling
clay. So once you have one, two, three, four, five. So I recommend getting some modeling clay, making
the shape, and then drawing it from a bunch of different light directions. Side light, top light,
back light. Again, because this form occurs so frequently on the human body, where you have
muscles sitting on top of other muscles, one form on top of another form, which creates this distinct
shadow pattern. Body shadow, cast shadow, body shadow, cast shadow. This happens a lot and can be
practiced using this simple form. Now let's talk about the last exercise, which is to take the
plasticine, the modeling clay, and form it into increasingly complex shapes. In this case, I've
taken a sphere and I've added some bumps to it. This is particularly useful if the plan is to apply
crosshatching to portraits, to the human form, to figure drawing. Again, often these kinds of shapes
occur on the human body, where you have a larger form and then some kind of smaller form sitting
on top of it. This kind of exercise is incredibly useful in becoming comfortable rendering those
very complicated overlapping forms. Let's indicate the cast shadow, and then we need to find the
light break. So it runs this way, runs like this, runs across, runs across this bump, and runs across
the bottom. Then we have a little sliver of light here. Now we can start shading it. By the way, one
thing I can do to give the stronger effect that we're dealing with something that has a rough
texture is to shorten my strokes. Long strokes give the suggestion of smooth texture, even texture.
Short, broken strokes give the effect of roughness. So by shortening the strokes, it gives the fact that
this is a handmade object made of modeling clay. It's not something that was manufactured in some
kind of press. So in this case, that's something we can practice as well. Use shorter strokes.
We still need to keep the gauge distance the same, though. Again, the idea is that the hatching should
disappear into the drawing. It shouldn't be the most important thing. I think often artists try
to make the hatching decorative, and that's going to draw too much attention to itself and create a
distraction. That's not something you want. You want the hatching to be there. Part of the appeal of
cross-hatching is that tension between the image and the way it was made. In the same way, a painting
with very thick paint has that tension between the image and the way it's made with thick brush
strokes. That's part of the appeal, of course. But I think if the hatching gauge is too varied or the
lines are too decorative, then it overwhelms the image, which is not something you want.
You want the hatching to be there. You want it to be appreciated, definitely. You don't want it to
become the image. Let's put in the cast shadow. I'm just trying to introduce a little bit of
additional texture here. Again, short strokes gives the effect of rougher texture. Here we
have longer strokes because we're dealing with a flat, smoother surface. This is just one
suggestion of a form you can practice drawing. It doesn't have to be this. It could be a number of
different things. It could be a sphere with some kind of depressions in it or some kind of
completely irregularly shaped object. The key is to increase the difficulty little by little and,
as always, practice drawing these forms from different light directions. Here are the 10
exercises I recommend you do to build your cross-hatching skills. While some of these are
quite basic, I think they'll be of benefit even to advanced artists looking to hone or maintain
their skills. I think one of the advantages of doing exercises like this is that there are no
stakes, nothing to make you nervous or frustrated. They're also confidence building, making you less
anxious to take on more ambitious pieces. These are exercises that can be done whenever you have
a little bit of time or as a warm-up before working on your larger projects. Give them a shot
and, while you shouldn't expect a miracle, I think over the course of weeks you should see
significant progress. I hope you found this tutorial useful and if you did,
please subscribe and stay tuned to more tutorials like it.
Thanks for watching and hope to see you back in my messy studio very soon. Bye for now.
