Follow my simple, detailed steps to draw a realistic eye in pencil. My method is aimed to help even the most complete beginner draw something they once thought was impossible.
If you get stuck on the shading part, please refer to my shading tutorials below. If you have any questions, leave them in the comments and I'll get back to you as soon as I can :)
DISCLAIMER This content contains affiliate links. If you decide to make a purchase through the link, I will make a small commission at no additional cost to you. This helps fund free tutorials on the RFA channel and website. Thank you for your support!
AI Generated·May contain errors
Video Summary
AI Generated
Darlene from Rapid Fire Art provides a comprehensive tutorial on drawing a hyper-realistic eye. The guide covers the entire process from initial geometric construction and anatomical shaping to advanced shading, intricate iris detailing, and the application of highlights to achieve a three-dimensional, glassy effect.
Hey! I'm Darlene and you're watching a Rapid Fire Art tutorial.
In this video, I want to show you my unique method for drawing a hyper-realistic eye
from complete scratch. I'll walk you through step-by-step and give you all the details
you'll need so you can follow along. Let's begin.
These are the materials I'll be using. They'll be listed in detail down below.
You don't need all of them. If you only have an HB pencil and a solid eraser,
that's completely fine. Don't let the lack or difference in materials discourage you.
I'm using a mechanical pencil with HB lead to start. If you want to use only one pencil for
the whole thing, I'd recommend a 4B because it's very flexible regarding the range of values it
can easily reach. The first step is to draw a very light circle. I like to hover my hand over
the paper and make circular motions. Once I'm confident with that motion, I'll lower my hand
and draw the best circle that I can. If your first attempt at drawing a circle looks like an oval,
don't even bother to erase it. Just draw additional lines around your oval until it
slowly forms a more circular shape. If you're finding it really hard to get past this,
just trace something circular and move on to the next step.
The next step is to decide on the slope or angle of the eye. It can be angled in this,
this, or this direction to varying degrees based on your liking. Use a straight edge to draw that
line through your circle. It doesn't have to go straight through the center, but do try to keep
it fairly close. The next thing we need to do is form the shape of the eye, starting first with
the inner corner. For this eye, I'm going to draw a large corner on the left, right outside of the
circle. You can kind of draw any unique shape you want, a triangle, a deep bowl shape, a droopy one,
etc. Try to make it unique. Moving on to the top eyelid, it's going to arch all the way across the
circle and end at this intersection here. Just draw a stroke up, across, and then down.
End your stroke at this point here. For the bottom lid, we'll need to draw a more shallow curve.
Just extend this stroke naturally to the right, angle it down slightly, and then back up again
to close the loop. That completes the eye shape. But there's one more thing, and that's the upper
eyelid crease. This crease forms when we open our eyes. Just use the shape of the top eyelid as a
rough guide to follow along. Starting at the edge of the circle, I'm going to draw a crease that
stretches all the way to the right, ending above the straight line. So I'm going to end the crease
above this line here. I'm going to wrap the tail inwards, but you can also flare it out and add
wrinkles if you want. Now that we have a structure drawn out, let's erase all of the initial construction
lines. So that would be the circle and the straight line going through it. I bought this
electric eraser on Amazon a while ago, and I'm just trying it out for the first time.
It's a lot more effective than a kneadable eraser for getting rid of construction lines quickly and
cleanly. Time to draw some details in the eye. Where the inner corner of the eye opens up to the eyeball,
draw a very faint shallow curve to separate the two zones. I'm going to draw the iris next.
For sizing, a good rule of thumb is for the iris to take up about two quarters of the eye
horizontally. For this measurement, I'm not including the inner corner of the eye.
If you want a perfectly shaped iris, draw a full circle and then erase parts that fall outside of
the eyeball. Let me just erase the top part. The next step is to faintly outline our main highlight.
I'm going to draw a reflection from a rectangular light source, such as a light box or a rectangular
window. You can choose any shape you want for this step. A circle, oval, or two rectangles on either
side. You can really get creative here. Since the eyeball is a round surface, don't forget to skew
the shape of the reflection so it wraps around the curvature of the eyeball. This will help give
off the illusion of roundness. You can make your shape more unique by throwing in some obstacles
as well. For example, a photographer's head blocking the bottom left corner of the light source.
Let's draw the reflection now. You can draw yours anywhere, but I prefer to place it inside the iris
for an intense contrast after all the shading is done. For the pupil, let's make a mark in the very
center of the iris. You can find the center by drawing a cross through the iris. The intersection
between the two lines is the middle. Around this dot, I'm going to draw the pupil. The size of the
pupil depends on how much light is entering the eye. There are other factors as well, but let's
keep this simple. The pupil regulates the amount of light entering the eye by changing its size.
It will get wider in the dark and narrower when there's light. With that general bit of information,
choose an appropriate size for your pupil while taking the environment of your drawing into
consideration. Is your subject in a bright, dim, or dark room? I think this is a good size for mine.
Before you shade the pupil, you can add a reflection inside or going through it.
I'm just drawing a random wavy shape, and then I'm going to shade over it about 80%.
So it's barely there, but it's still somewhat noticeable. Next is the iris. We're going to give
it a lot of detail. To make the ring of the iris look less like an outline, let's thicken it slightly
and blend it so the edges look much softer. You can blend using your pencil by slowly working
around the edge, creating lighter and lighter lines until it fades to white. Or you can use
a blending stump to smudge the graphite. Light smudging will result in light marks. Do this all
the way around. Next, we're going to shade the entire iris while keeping the highlight the
lightest. We want to keep it as clean as possible. If you're drawing a light colored iris and the
outline of your highlight is fairly dark, you might want to lighten it up before you start
shading. Since I'm drawing with a mechanical pencil, I need to thicken the lead by holding
it at an angle and scribbling until the strokes become thicker. This will help you shade more
smoothly. When you shade with a pointy or thin edge, it's going to look really scratchy. It'll
be very difficult to shade smoothly. Remember that thick strokes are easier to blend. Also try to keep
your strokes close together for a smoother texture. Just give the iris a light shade of gray for now.
It doesn't have to match the iris ring. Okay, let's think about the lighting for a bit and how that
affects the eye and where we should add shadow. Based on the reflection in the eye, we can tell
that the light comes from the top right. Since the eyelid comes out in front of the eyeball, there's
going to be some light blockage just below the top eyelid. Let's draw that cast shadow on the iris
since we're only focusing on the iris right now. Make sure you lighten those pencil strokes as you
work your way down so that the edge of the shadow is soft. If you want the iris to be a darker color,
you can shade it further. That's totally up to you. Again, if your highlight outline is darker than
the iris color, you can lift a few layers of graphite away using a kneadable eraser so it's
less obvious. Just roll your eraser to a fine tip and dab lightly. If you don't have a kneadable
eraser, try to shade the iris just enough so that the outline is barely visible. Now there's no
visible outline around the highlight. If you want, you can leave the iris like this, but if you want
to give it a lot more detail, please continue. Draw a faint wavy ribbon surrounding the pupil.
Try to give it a random shape, avoiding any obvious patterns. The more random it is, the more realistic.
Alright, now let's add some spokes coming out from the center of the pupil.
Make sure your lines radiate from the very center. It'll help to start your stroke from the center
of the pupil and work your way out towards the ribbon. So instead of doing this, we're gonna do
this. You can vary the darkness and thickness of each line for higher realism. Imagine the lighter
space between each of these spokes as a piece of thread. Some of them are straight, others can be
curved, but what they all have in common is they generally radiate outwards from the very center of
the eye. These threads disappear into the hole, which is the pupil. So where the spokes meet the
convex areas of the ribbon, the curves that jut outwards, we're going to create some shadows that
give this particular part of the iris more depth, making it appear deeper. To create a more realistic
edge to the pupil, round off the end of each thread, ever so slightly. You can do this by
drawing black triangles in between each thread. So we worked on the inside of the ribbon, but there's
also the outside. Just draw tiny threads squiggling outwards and gradually disappearing as it nears
the edge of the iris. While you're doing this, make sure to keep a small distance from the ribbon
and give it an even amount of thickness all the way around. Try to keep everything outside of the
ribbon very subtle. Where your thickest, most prominent threads intersect with the ribbon,
join the two sections together to form a vein-like structure. I'm doing that by rolling my eraser to
a fine tip and erasing graphite along areas that separate the ribbon from the thread.
Here's a clear example of what I mean. Once all the threads are drawn, you can randomly darken
the spaces in between to add depth to your iris. The squiggly threads should fade out as they near
the edge of the iris. If they don't, you can shade over their tails until they do. Start out lightly,
working in layers as you go, just to make sure you're not shading too much, because erasing is
always harder than working slowly. If you're happy with your iris, move on to the next step.
We're going to come back to this later to add more depth, but for now, let's finish the rest
of the eye. The next step is to shade everything else in, starting inside the eye and then later,
the skin. This inner corner has sort of a soft yet bumpy texture to it, so as you shade it,
create a few bumps of different shapes and levels of protrusion. For more info on how to shade,
click on the video above or in the description box below. Try to keep the shading fairly light
for now. Once we have everything else shaded, we can come back here to lighten or darken,
depending on how the rest of the drawing looks. The eyeball looks very flat right now because
it's a single shade of white. To make it appear round, try the contour shading technique by
drawing curves that follow the contour of the round eyeball. I'm just creating shallow curved
strokes along the eyeball. My strokes are darkest where the surface of the eyeball curves away from
the light, so in this case, with the light shining down from the top right, the left bottom side of
the eyeball will appear darkest because it's furthest from the light. Again, if you want to
shade smoothly, always remember to keep your pencil strokes thick and close together. Surfaces
that face the light directly will be the lightest. Overall, the right side of the eyeball will appear
brighter than the left side because the light is coming from the right. I'm also blending the edge
of the iris out more. You'll notice that I'm completely shading in the eyeball, leaving the
rectangular reflection as the only thing that's white. This will make it pop out like crazy.
Always make sure your patterns of light and shadow are consistent by referring to your light source
constantly and seeing if any shadows are missing or if light needs to be added. Remember when we
added a cast shadow right here because the eyelid was blocking light from reaching the eyeball?
Let's shade the white part of the eye in the same way. Just add a slightly darker shade of gray along
the top. Okay, we're done shading inside of the eye for now. I want to draw a few details along the skin
before shading it. Over here, we sometimes have small wrinkles that stretch upward towards the
crease. Just using some branch-like strokes to indicate those wrinkles while keeping my strokes
light. Another detail is a small ledge that runs along each eyelid. In real life, there are no lines
to indicate the edge, just a slight difference in skin color. So when you draw this line, please keep
it as faint as possible. The more the top eyelid comes down or closes, the less we'll see of the
upper ledge. Let's use the contour shading technique to shade the skin. Just follow the
shape of the eyelid or the crease and fill in the skin color slowly. So instead of shading in this
direction, we're simply going to follow the eyelid shape. If the ledge outline starts to disappear,
that's okay. You don't want it to be too obvious but you also still need to see that it's there.
It's going to help us later on when we draw the eyelashes. I like to work in layers. My first pass
is just a flat shade of light gray. On the second pass, I'll add darker shadows along the crease.
The darker the shadow is, the deeper the crease will appear. To stay consistent with patterns
of light, I'm shading the right side lighter than the left because my light source comes from the
top right side. My shading is darkest near the crease and becomes gradually lighter as I work
away from it. Same contour shading technique down here. At the bottom of the eye, it's okay if your
pencil strokes aren't completely smooth because the strokes can conveniently be interpreted as
wrinkles. Directly under the ledge, I'm going to shade the skin a little bit darker. This will make
the bottom of the eye appear less flat. As I'm doing this, I'm trying to make the ledge outline
blend in with the skin. This part is optional but I'm adding a few wrinkles under the eye
using strokes that are sort of disconnected. The darker the stroke, the deeper and more unrealistic
it will appear. Around the wrinkles, you can use the cross hatching technique to create a texture
that resembles skin. Just draw subtle strokes that go in all sorts of directions. Let's shade up here
as well. And then along the crease, I'm darkening the graphite making it gradually lighter as I move
away from the dip. This will make it look like an actual crease instead of just a line on the drawing.
You can skip this next step if you're satisfied with a level of smoothness in the skin.
It will remove a small layer of graphite making your drawing appear a little bit lighter
so beware. I'm just using a soft piece of tissue wrapped around my finger to smudge the graphite.
Getting the graphite bits to fill all those tiny valleys within the paper
which should make the drawing look much smoother. I'm sort of following the direction in which I
shaded and I'm using a different area of the tissue as I move from section to section
so that I don't smear darker graphite into a lighter zone which would create an unwanted
blemish. I'm also avoiding everything inside the iris because I don't want any of those details
to be blurred and to keep that reflection clean. Again as I mentioned, the drawing will appear a
little bit lighter after you've done this. Here's what it looked like before I used the tissue paper
and after. I'm just going to go back in and darken some areas again to bring back the level of depth
that was lost. Again I'm just shading dark areas darker because the tissue made it look lighter
than I prefer. If you want to skip to the next step, navigate to the time stamp displayed on
the screen. Now the eye just doesn't look right without lashes so let's draw those next. So the
way I draw lashes is I draw three on each lid to start, each pointing in a different direction
like so. Once you have the three lashes drawn on each eyelid, the rest should be very simple to
fill in. If you're having a little difficulty picturing the lash in 3D, you can think of each
lash as the letter J. As you draw each one working from the outside in, pinch the J until the space
in between becomes so narrow that it turns into a straight line. Now if you want to be safe and
plan out the shape and position of each and every lash, you can do so by drawing them in very lightly
so they'll be easy to erase. This step is best done with the pointiest edge of a thin mechanical
pencil. Mine is a 0.5 millimeter. Each of these lashes are rooted near the perimeter of the
eyelid's ledge. Try to keep your lashes close to that but avoid drawing them like a row of perfectly
planted crops because these hairs grow in a more random fashion. Here's a clear example of what I
mean. I'm going to go ahead and draw them in fairly dark using a 4B lead. This will allow me to create
darker strokes that don't require much downward pressure. If you want to draw lighter hairs, stick
to an HB or harder pencil. When drawing lashes close together, you can make the ends meet, forming
a triangle or a tent. Keep in mind that some randomness will look a lot more natural. Some
lashes do grow in random directions so it's good to toss in a few that deviate from the majority.
So instead of drawing all the lashes in a boring predictable pattern, create some randomness like
this example. Here are a few more things I want to mention. The bottom lashes are usually much shorter
and thinner than the top and lashes closer to the inner corner of the eye, whether they're on the top
or bottom, are the shortest and thinnest of them all. When you're drawing lashes on females, don't forget
that you can give her mascara. For anyone who isn't familiar with mascara, it's a thick black liquid
that you can apply to your lashes to make them appear thicker and fuller. Now I know some of you
like to watch the whole process so I'm not going to cut this part short. If you want to go to the
next step, please forward the video to the time indicated on the screen. If some lashes are too
long, you can easily shorten them by rolling your kneadable eraser to a very fine tip and dabbing
the graphite away little by little. Okay, I'm done with that. Now since I added a new element to the
drawing, lashes, I will need to include a few small details resulting from that addition. With these new
lashes growing out of the skin, the skin texture may look slightly different than before. What do I
mean by that? Sometimes a bump may form at the root of a hair. Here's a really exaggerated example of
what I mean. Some people may have larger bumps than others and some not at all from my observation.
So if you want, you can follow me with this step or skip it completely. It's up to you. Such bumps
will create shadows no matter the size. Let's shade the bumps along the root of each eyelash.
I'm doing a very light circular motion like so. I'm being really sloppy because the skin here is
almost hidden behind the thick wall of lashes but I still want some of that skin texture to show
through. It's just a small added detail. Alright, when we move on to the bottom lashes, the skin is
much more visible because there are so few lashes. So we can't really be as sloppy. Let me draw
another diagram, zooming in on the hair and skin bump. The light comes from above so the shadow
will be located at the base and underside of the bump. I'm shading in tiny circular motions for
added texture. This diagram is also exaggerated. Let's draw more subtle shadows than that.
Just deepening these wrinkles by making them darker. Here's a little test for you. Do the
lashes affect anything else in the drawing? If so, what is it? If you said that they block light,
creating cast shadows, you're correct. Although they are very thin, they do block a small amount
of light. It's most noticeable under the top lid. It adds another layer of shadow along the eyeball.
Just add a very light layer of graphite. Since we're working around this area already, let's add
a bunch of lash reflections at the top of the rectangular highlight. It's just a mirror reflection
of what's above. I'm drawing short lines and very deep hue shapes. Hold on, let me add some darker
shadows here. These are singled out cast shadows from the eyelashes above. The next and very last
step is to make the drawing pop out of the page. Take a step back or a few steps from your
sketchbook and look at where you could darken or lighten the eye. This step is super fun but you
have to make sure that your eye is fully or almost fully shaded in order for this step to really make
a difference. Especially if your paper is white. There shouldn't be too much paper color showing
through. If there is, try to shade a light layer of graphite over the area. I'm still using the 4B lead.
Just gonna go over the darkest areas and deepen those values further to create a higher contrast.
In other words, I want to create a bigger difference between dark and light. Just going in and making
dark areas darker than they were before. This gives the drawing more depth. If you're using an
HB pencil for this, it might be difficult to create these dark values because the pencil is meant for
lighter work. If your paper starts to become wrinkly due to all the friction, it's probably a good idea
to leave it at that. I'm not going to narrate this because I'm just amplifying dark values.
So if you want to skip to the next step, navigate to the time stamp displayed on the screen.
Once you're satisfied, use a white gel pen or correction fluid to add a bright white inside the
eye to create that glassy look where the light is intensely reflected. Aim for areas that are
especially wet. Here I'm going along the edge of where the bottom eyelid touches the eyeball.
There's always an extra bit of fluid around here. Smooth wet surfaces reflect a lot more light than
dry matte ones. This area near the tear duct is also very moist. Just add little bits of white
in the lightest zones. Just going to use this gel to increase the size of the main highlight
and clean up some of those eyelash reflections. I'm not going to color the whole thing white
because it's good to have some slight variation in value. It's very rare for a large area to be
completely white or on the other hand completely black. If you want to tone back some of the white
gel or white out, you can always use your pencil to shade over it after it has dried. If you don't
have a white gel pen, pencil, crayon, or correction fluid, just use your eraser to lighten these zones
as much as you possibly can. Just doing a final check. I might as well darken some of that detail
in the iris, amplifying those darkest zones for a more dramatic look. Let me show you the difference.
Here's the iris before and after. It looks a little deeper. Now if your eyeball doesn't look
round enough, you can always darken the value some more until it takes on the right shape.
Just remember to keep the value transition very gradual. A hard edge such as this may break the
illusion of a round surface. For more info on how to shade, click on the video above or in the
description box below. Alright, I hope you guys enjoyed that and found it easy to follow. If you
did, please give the video a thumbs up and let me know how it went for you in the comments.
Also, if you have any questions, I'd be happy to answer them. Thanks for watching and don't forget
to subscribe to my channel and hit the bell icon to get notified every time I post a new video.