DIY MEGADESK: 12ft long Smart Standing Desk!

LeMaster Tech
183 followers
698 Video Views·May 9, 2026
I have wanted a huge DIY standing desk since I started setting up my garage workshop 2.5 years ago and I finally got around to building it!
Tuya Main Links:
Development board page: https://bit.ly/4ix9ONa
TuyaOpen: http://tuyaopen.ai/
GitHub: https://github.com/tuya/TuyaOpen
Tuya Discord: https://discord.gg/yPPShSTttG
Tuya Additional LINKS:
T5 AI board: https://bit.ly/4ix9ONa
Tuya AI solution: https://bit.ly/4crfJ52
Tuya Expo for hardware: https://bit.ly/4m3y1hg
IPC product: https://amzn.to/4jugmh2
Work with Smart Life on Amazon: https://www.amazon.com/s?me=A1369HHAJXBNH8&marketplaceID=ATVPDKIKX0DER
Tuya Discord community invitation: https://discord.gg/yPPShSTttG
AI Generated·May contain errors
This is Megadesk. I'm an engineer, so I work on projects that sprawl. Sometimes I do CAD modeling,
3D printing, electronics hookup, and filming and editing all in the same day for the same project.
I needed a lot more desk space, and with such a wide range of interests and projects,
I knew it was going to need to be custom built to meet all of my needs.
Today, I'll show you how I designed and built every engineer's dream desk setup,
and even incorporated some advanced electron controls into it using this AI-assisted
development board from Tuya, the sponsor of today's video. More about them later in the video.
I started by coming up with a design to maximize my available space that was about 12 feet long,
and I'd divide the workspaces up into approximately three zones.
To get 12 feet wide and a super sturdy work surface, I got three sheets of three-quarter
inch sanded plywood. I ripped one foot lengths off of each, and then I cut one sheet into two
four-foot sections. I made eight of these L-shaped 2x4 legs about 28 inches high,
and added these threaded insert feet so I could make sure the entire thing was really level.
Then I made the main surface of the desk an 8-foot by 3-foot sheet with a 4-foot by 3-foot
sheet butted up against it. Then I laid my other 8-foot sheet on the opposite side,
and fixed the two layers together with glue and wood screws to make sure the seam between sheets
was in different places for the two layers. The last 4-foot by 3-foot sheet goes into the
remaining spot on the second layer, but I'm going to be using this for my standing desk zone,
so I don't glue that one down or fix it in any way just yet. Now these are some pretty big,
long spans between legs, so I needed to add lateral bracing to the legs in both the x
and y directions to make sure this entire desk is super sturdy. Then I added a 2-foot high
elevated platform over the left third of the desk. The primary purpose of this was to give me a
permanent and sturdy home for my 3D printer that was out of the way but still super accessible.
I used the 1-foot by 8-foot lengths that I ripped off of those plywood sheets as backing for the
leftmost 8 feet of the desk, too, since I want to be able to have these quick-access drawers and
cubbies for electronic components easily available. Then I added these hidden electrical
access boxes to about the 4-foot and 8-foot mark in the desk to make sure no matter where I was
working, I'd have ample plug access when needed. I wrestled with how I wanted to do the standing
desk for a while, like you're probably wrestling with whether or not to like this video and
subscribe to Lemaster Tech right now, but now is the perfect time to stop wrestling and just do it.
Sometimes I know I'm just going to want to stand and use my computer, but sometimes I'll want to
use it for walking on my treadmill, and sometimes I'm actually going to want to raise it as high
as that 3D printer platform and just have a clean, uninterrupted workspace underneath.
I decided to go with linear actuators. They're pretty affordable, super strong, and they only
take 12 volts DC to control. The only real problem with this was I had such a long desired stroke
length that my actuators were guaranteed to stick out above my desk surface when fully retracted,
so I needed to design these simple overhangs to mount my desk surface to. The other super
important thing to keep in mind with linear actuators is they only provide you with support
in one dimension, hence the linear part of their name. They're not able to resist shearing forces
or bending moments, so I needed to modify the design with two features to account for this.
I added a hidden shelf so that I could mount a bracket that would slide along a linear guide rail
when the desk was moving up and down. This would resist the tipping forces. Now, controlling two
linear actuators together is actually frighteningly easy at its core. Because they only need about 12
volts DC, you can actually make sure they work as intended with a variety of common RC car batteries
such as these, which output nearly 10 volts. Initially, I ran the whole desk off of one of
these batteries and a three position rocker switch. Linear actuators only have two wires
coming off them, and they reverse direction by you reversing the polarity of power that you feed to
those two wires. So with this simple setup, I can test up, down, and off. I did do a whole video
fairly recently on linear actuator control if you need more details on this part, but with the basic
functionality and structure proven out, I wanted something more elegant to control my standing desk
than the rocker switches I had been using. I for sure didn't want to be standing around holding a
switch down for two minutes, and it was super fortunate timing because that's about when I was
contacted by the sponsor of today's video, Tuya. Tuya Smart is a company that specializes in
Internet of Things, or IoT, and AI-assisted equipment development. Their Tuya T5 AI development
board is a Wi-Fi enabled microcontroller with a built-in touchscreen, a speaker, and a microphone.
It's an all-in-one board. It runs on an embedded RTOS, or real-time operating system, and supports
over-the-air updates. It has enough GPIO to control motors and LEDs and whatever else you need,
and the real party trick is its AI integration. Tuya has a cloud stack that lets you run a voice
activated chatbot directly on the device and control the GPIO and physical connected devices
to it. Hey Tuya, command the desk all the way down. Hey Tuya, turn on the lights. Hey Tuya,
all done. To get rid of the hand rocker switch, I needed three relays. Basically, I need the two
output pins of the development board to be enable and direction for the two linear actuators.
Direction reverses polarity on the two relays that are connected to the actuator wires,
and enabled controls the flow of power into those relays. The other output that I needed
for my application was a pin to send serial commands to a strip of NeoPixel LED lights
that I added to the hidden shelf and embedded in a nice metal channel with acrylic sheet to diffuse
it. So all in all, this board acting as the brain for my desk has made it feel a little more fun
and sciencey and engineeringy out here. So thank you to Tuya for sponsoring the video. You can find
a link to their products and services in the description below this video, along with some
getting started guides and other Tuya links. This desk build was actually a ton of fun to physically
build, and I got to use the electrical, mechanical, and software skills that I love building projects
with every day. So to actually build the surface on which those projects will be getting developed
from now on is also super cool. Sometimes the environment we make stuffing can have a direct
impact on the quality of what we make. And thanks to Megadesk, I've felt more streamlined,
focused, and motivated making cool stuff out here than ever before. So that is going to do it for
today's video. Thank you so much for watching. Be sure to leave a like on the video, subscribe to
the channel, and I'll leave links to all the hardware used as well as my code and source
files and everything else linked below in the description. If you have any questions about what
you saw here, be sure to leave them in the comments as well, and I'll get back to you as soon as I can.
And be sure to let me know in the comments what you want to see more of on the channel as well.
Thanks for watching. See you next time. Bye.
