I made a table saw miter jig for my crosscut sled | FREE PLANS

With this table saw miter jig, you change the angle of the cut in a blink, and cutting long angles on a table saw can be done on the table saw with ease now. Just place this jig on top of the crosscut sled, and you are ready to go. You can make this table saw jig too thanks to the free downloadable plans and step-by-step instructions on my website.

Blog post with MORE INFO & FREE PLANS: https://www.christofix.com/table-saw-miter-jig-for-the-crosscut-sled/
Blog post with free plans to build the crosscut sled: https://www.christofix.com/how-to-make-most-complete-crosscut-sled-free-plans/

==============================================================================

VISIT MY WEBSITE
📖200+ woodworking-related articles & FREE PLANS: https://www.christofix.com/

BECOME A CHRISTOFIX MEMBER
💳 Get access to special membership benefits: https://www.youtube.com/c/ChristofixDIYProjects/join
Check out my current members + links here: https://www.christofix.com/become-a-member/

BUY FROM CHRISTOFIX
🏺 My Etsy shop: https://christofix.etsy.com

SUPPORT ME
💰 Donate on PayPal: https://www.paypal.me/Christofix
Your donation will be used to continue creating informative videos and blog posts. Thank you for your support!

==============================================================================

____*TIMESTAMPS*____

00:00 What you will see in this video
00:10 Building this table saw miter jig
02:30 Homemade knobs
02:48 Assembling
03:43 Demonstration

____*MUSIC IN THIS VIDEO*____

🎼 Music from Epidemic Sound 🎼.
Get the best music for your videos here: https://www.epidemicsound.com/referral/0eg20l/

____*PERSONAL PROTECTION EQUIPMENT*____

⛑ Ear protection — https://amzn.to/2E78K1T
⛑ Dust mask for woodworkers — https://amzn.to/3y5Zg0t
⛑ Work gloves — https://amzn.to/2YC4MYu
⛑ Safety glasses — https://amzn.to/2E40Ea7
⛑ Safety Boots — https://amzn.to/36qkCZ4
⛑ Blaklader work pant — https://amzn.to/2t58T3C
⛑ Blaklader Foam knee pads gray — https://amzn.to/36nQDAU

____*MATERIALS USED IN THIS VIDEO*____

⚙ Birch plywood 18 mm
⚙ Bolt M8 60 mm — https://amzn.to/2OmPbsp
⚙ Nut M8 — https://amzn.to/2OLIX3Z
⚙ T- nut M8 — https://amzn.to/2OHLvjU
⚙ Washer M8/20/0.2 — https://amzn.to/34mikJQ
⚙ Wood glue — https://amzn.to/35qtpJU
⚙ Screws 5×50 mm — https://amzn.to/2YkG9zf
⚙ Threaded rod M8 — https://amzn.to/2KUqEbT
⚙ Epoxy glue — https://amzn.to/2OijfFf
⚙ Sanding paper 120 grit roll — https://amzn.to/35MKRZ3
⚙ Dowel 8 mm — https://amzn.to/366O0mU
⚙ Blue painter's tape — https://amzn.to/31s19rF

____*TOOLS USED IN THIS VIDEO*____

🔧 Pica marking pencil — https://amzn.to/32q9vyk
🔧 Makita MLT100 table saw — https://amzn.to/2Dzw0Fz
Unboxing video — https://youtu.be/iIvp39Z5Ayk
Review video — https://youtu.be/xKs4Mimvbqc
🔧 Hilti Cordless drill SF144-A — https://amzn.to/2qIfmR2
🔧 Drill press — https://amzn.to/2KVGdjI
🔧 Makita 3709 router — https://amzn.to/2RWPnPG
🔧 Kreg KMA2900 Multi mark and measuring tool — https://amzn.to/2P1n0yc
🔧 Makita AF505N Brad nailer — https://amzn.to/2ORVhQf
Unboxing video — https://youtu.be/E-fEhvlq2Es
🔧 Brad nails 25 mm — https://amzn.to/3ap1M6p
🔧 Air compressor — https://amzn.to/3gog6yS
🔧 Digital angle finder — https://amzn.to/2LAgIIh

____*MY JIGS I USED IN THIS VIDEO*____

🔨 Star Knob jig — https://youtu.be/2rkmki4kbVw
🔨 Crosscut sled — https://youtu.be/OCRI7hMpAUg
🔨 Sanding block — https://youtu.be/1ixYEiklgbI
🔨 NO CENTER HOLE Dead simple router circle cutting jig — https://youtu.be/PJt8fQeKkKc

____*RECOMMENDATIONS*____

📖 Want to see how I learned to shoot my videos? http://bit.ly/shootvideoswithanycamera
📖 How I saved hundreds and was able to invest in more tools with the same budget: http://bit.ly/mysmallshop
📖 Read my full story about how I started here: https://www.christofix.com/about-me/

____*CONTACT*____

🔗 E-mail - [email protected]
Feel free to email me about sponsorship, advertising, or endorsements.

THANK YOU FOR WATCHING!

#Christofix #Woodworking #crosscutsled

Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesn’t cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!