http://www.VideoJoeKnows.com American Standard kitchen faucet install (Part 3) just got a little easier, with "joe"! Do you have to be a Rocket Scientist in order to install an American Standard kitchen faucet? No. American Standard makes it easy, to where even YOU can do it!...lol Not many tools are required but "joe" will show you a few you might need, in order to install the kitchen faucet. Stop paying someone else when you can do it yourself. If "joe" can install an American Standard kitchen faucet, so can you. Step by step, you can do it. Just watch as "joe" shows you how easy it can be, to install an American Standard kitchen faucet. American Standard has lots of kitchen faucets to choose from, so I'm sure you'll find something in your price range. Get with the program & start saving yourself some money on your howto projects. Let "joe" show you how. Don't pay someone else when you can do it yourself. http://www.VideoJoeKnows.com
okay it's time to hook these up now this was the hot water line i determined from before
and so i want the line here that has the red there's a little red stripe on there i don't know
if you can really see that or not i think you can that's why i knew that one went to the hot side
okay i'm just going to put that up in there and tighten her down now if you've seen some
of my other videos which i hope you have on most occasions i put teflon tape around this
well technically these flexi lines are designed when you tighten them up there's a bushing in
here you tighten them up just right they should not leak i'm going to try that this time without
putting any teflon tape okay just the the trick is when you put the nuts on and when you're
it down don't over tighten it because you could then make a leak okay so i'm going to put those
snug on the hot water side and the cold water side i'm going to make them snug then i'll turn
the water on and everything and if it's dripping ever so little then i can kind of cinch it up
16th of a turn another 16th another 16th something like that until it stops dripping
if it were to drip if it's not going to drip then i've got it fine okay there's a tip for you
got that completed you remember this other pipe i've got a screw back on there i'm gonna go ahead
i'm gonna put teflon tape on there just because i can reach it and it's easy enough to do
before i get back up there okay do you have to put teflon tape probably not
but because it's right there i'm going to do it anyways glad i had some of this
at home i had to run back and get some the trick with this is you want to put it on there
nice and even you want to get it over too far and you want to put it in the same direction
as the nut's going to go on there you know because if you don't i got too much on there
if you don't then when you put your nut on there you could start loosening up the teflon tape
so the wrap has to go the same direction as the nut okay that i'm gonna put that up there now
you remember up above there there's another nut okay so there's there's a little nut here where
i can i gotta hang on to this a little pair of pliers or crescent wrench right there i can tighten
up that other top nut on there you got to make sure to do that so that you could get a good
connection here's the here's the hose that i connected up there okay now they give you
they give you these things and it's just a split ring see i can put that over that hose
this is just like a weight that's going to be a weight you see that it's split like that
and it takes these two screws and i'm gonna i'm gonna attach that on to this hose here
this hose right here and that's the hose that goes up and you pull when you pull this out
you know that's that hose when you push it back down it helps it slide down you don't really need
it but they always give them to you and it's always kind of a nice idea to do that that way
it kind of zip kind of gets in there because you've got that weight that's kind of helping
pull that back down so before i hooked up that hose down there i had to route it in just a way
and route this hose in just a way you know in front of pipes behind pipes whatever so it goes
straight up and down so take a look at that before you tighten that up all right okay put that weight
on now okay i got that i'll see there that's how you're gonna do it i got that attached and i didn't
want it you don't want to put it up too high then you can only pull it out so far but you don't want
to get this down so low that it's beyond your your loop down here so i got it in about the right
spot i mean i i i pulled this out of here i pulled this out and i got plenty okay kind of helps it to
a certain extent okay what you're gonna do now i think we're ready by golly we're gonna turn the
water back on the hot water and the cold water i'm gonna see how it works okay i got the water
on let's see what happens oh nothing if yours do does that don't fret what you got to do is you
got to pull this out sideways like that okay and then there's a little deal up here you can flip it
waterfall or just straight okay so to the side turns it on and off and then down
or up is hot see a little there's a red and blue mark here on the side so down is cold
sure enough we got cold water and up and you have it over up it's hot it's feeling hot
and man that air gap for the dishwasher is just right there just it gives just enough
if yours is hitting you could loosen up the nut underneath here and slide it over
and then retighten it up you know it it fits all right there you go pull this out
there's all this stuff down wow that's pretty cool see you don't need a plumber you can do
all of these little projects on your own you put this faucet in you're going to save yourself some
money give you some satisfaction that you did it yourself too once you do one little project
around the house you're going to want to do more and the more you do it's just the better you get
once you think you're done make sure you turn the water on and get back up in there
and look around with your flashlight and make sure you don't see any drips you let it run
maybe four or five minutes you could even put uh dry this up and then after a while you can
tap down there with some toilet paper or Kleenex or anything like that if it's a little bit wet
you know you've got a little drip if you don't see a drip okay but check it out don't call it good
and then find out it's dripping just a hair and all you had to do was tighten that little nut up
or something like that so i'm going to get back down under there and check it out one more time
you do the same now how much would a plumber have charged you to come out to your house and take
your old faucet out and put a new faucet in that remains to be seen different parts of the country
it's different costs you know i'm gonna guess maybe 125 it could even be 175 or so it just
depends if your lines are long enough and and if there's no leaks and how old your existing faucet
is and all that kind of stuff so think twice before calling a plumber you can do it yourself