http://www.VideoJoeKnows.com American Standard kitchen faucet install (Part 2) just got a little easier, with "joe"! Do you have to be a Rocket Scientist in order to install an American Standard kitchen faucet? No. American Standard makes it easy, to where even YOU can do it!...lol Not many tools are required but "joe" will show you a few you might need, in order to install the kitchen faucet. Stop paying someone else when you can do it yourself. If "joe" can install an American Standard kitchen faucet, so can you. Step by step, you can do it. Just watch as "joe" shows you how easy it can be, to install an American Standard kitchen faucet. American Standard has lots of kitchen faucets to choose from, so I'm sure you'll find something in your price range. Get with the program & start saving yourself some money on your howto projects. Let "joe" show you how. Don't pay someone else when you can do it yourself. http://www.VideoJoeKnows.com
This is where we're going to slip it down now if your old counter has corrosion on it and
leak marks and if you think you need to clean this off better then go ahead now is a good time
to do that you know if you've got a little razor blade or some steel wool well you know scouring
pad something you know obviously if this is stainless steel uh you got to be careful with it
but i think this is out beyond it just enough and i'm going to be okay with this but
you know wipe that make it clean get ready to put it in ideally probably probably be
good if i had a helper here but i don't and i'm hoping i can do this whole thing
without without me or i'm gonna have to decide oh wow you see that that's that is the uh
the dishwasher um air gap and this handles real close to that i don't know i don't know if i can
move it over sideways on this side or not turn this so i got it you see this is only going to
so far both directions and that should tell you where this has to go wow that barely fits in there
okay so when you have it straight you want to turn it to the right and to the left and you'll
be able to tell about where it goes now because this handle has this on here sideways you pretty
much want to line that up from left to right and that should be about in the middle you can
just double check because see sometimes you've got the handle it's just right here and you got
a handle up at the top you don't have it coming out on the side that's when you're going to want
to look at this and make the determination with how far to slide that you know because when you
slide to the left you want it to be about the same angle as when you slide to the right you don't want
way over to the right and then the left stop right there okay so take a few moments of that make sure
you've got it going right then you can get down under there and tighten it all up okay and i'll
probably have to go back and forth i'll get it tight and i'll come back up here look at it see
if i can move it a little bit tighten it some more move it a little bit if i had somebody here
i could have them just hold this exactly where i wanted it and then i would tighten everything up
from below you know what i mean now here's the goodie that's going to slide up from underneath
we're going to put it up imagine if you're underneath the sink that's how it's going to
look you're going to have the rubber gasket going up first then you've got the flat washer
then you've got this nut and you're going to twizzle that on there and tighten it up
okay once you get it as tight as you can get it then it's got screws in here you're going to take
these little screws you're going to put it down in there you know like that and then you're going
to just tighten it down and that'll kind of hold this in place too to keep this nut from loosening
up at least that's the theory okay since i have them i'm going to use them if you had just nut
you would just tighten the nut up you know but because we have both that's going to help
bond it all together now i got to get under there and the trick is to reach up under there
put this up and tighten her all down you can do it take your time here's something i wanted to
show you i took the cabinet doors off and i've got a nice little construction light this thing only
costs about ten dollars okay and i use that for all kinds of stuff it's perfect for working under
here you know i used to use just a small little flashlight then it's hard to see and the flashlight
gets in the way the batteries run down and all that get yourself one of these little construction
lights they come in handy all right so far so good this is all lined up i got it all nicely
tight down there looks like it scribbles over where it needs to go and i got this lined up
straight so i know i couldn't do much different than that on off pull this out use that as a
sprayer press that i like this okay back under the sink we go and here's our here's our hot water line
this little that little one right there okay that's hooked up to that and that went up to
the faucet before remember up there but on this one it's kind of slick they got remember they had
this little this little line here and see it's got the small it's got the small end that small
end is going to fit right there so we got to take we got to take this one off man it's kind of hard
to show you this oops we got we got to take this one off to there okay because this is this this
one here is too big and it's got nowhere to hook on to now see this one see this red the that
red stripes deal see the end nut it's smaller and so this end nut is going to fit right there that's
that's really nice because i've seen some faucets you have to it doesn't come like this it it still
only come hangs down a little bit and then you take the existing flex and put up to it
you know that's i that's how i had to do the last one and and it worked out okay except the cold
water line was too short now see here's the here's the cold water line one right there
and i've got to take that one off too because the cold water line one
yeah it's gonna fit it's gonna fit right there okay let's see how that works up there i tighten
it all up and then i put those set screws in there got that tight man i'm sure glad i had
that tool again because see i could hardly i couldn't get up there with some pliers or anything
because it's so close up to the sink all right you get that as tight as you can then put the
set screws in there that's going to clamp it all down okay so my next step i just have to take this
this uh existing hot water flex off of the gate valve i gotta do the same thing with the cold
all you do is undo this nut right here that's all you got to do make sure your water still
stays off we're not touching that handle at all it's just a nut right there very simple to do
righty tighty lefty loosey make sure you take it off the right way here's the line that i took off
now maybe maybe uh this will give you a better idea here's the hot hot side and the cold side
well where you attach to the gate valve the nut is smaller than the nut that generally goes up
to the faucet okay see that you see how much bigger that one is than this one here
the smaller ones usually go to the gate valve it just depends what kind of gate valve you have and
how old it is and all that well in this case we didn't need these lines because the existing
or the new faucet came down the lines with a small nut that's why we had to take this off
the small nut goes directly to the gate valve that's pretty slick so these we're not going to
use anymore and i'm not going to save these these are like seven years old and you know if you try
to save these and think you're going to use them later uh the rubber gasket at at both ends could
dry up and maybe they'll leak later on they don't cost very much so on your next plumbing
project get some new ones in case you need some flexi lines