My Vrod fell over and cracked the lower frame rail where my foot peg and rear brake lever are. I thought I could just weld it and be good as new but after hours and hours of trial and error, I finally realized a critical detail I missed!
Thanks for watching! We invite you to join our family and come along on our journey of life!
To be a part of the "extended" Murph Squad Family hit the subscribe button and turn on the notifications!
Please help us grow our channel by sharing our videos with others!
"We are Christ’s ambassadors. God is using us to speak to you: we beg you, as though Christ himself were here pleading with you, receive the love he offers you—be reconciled to God." 2 Cor 5:20
Check out our Premium Athletic Brand - Grit Army (best athletic socks ever): https://gritarmy.com/ We appreciate your support of our Youtube Channel so here's a 10% discount code! At the checkout, enter the coupon code: murphsquad
Micah's podcast for teenagers and young adults (all ages will enjoy and learn from it), can be found on iTunes, Spotify, or whereever you lisetn to podcasts. Links below:
So here's what I'm thinking. This, I need to rotate it back this direction.
Repetition from my chest, that's a bench press.
Seeing more behind the frame, future bright, but feel the shake.
Thinking ain't nobody feel the way I do, but someone gotta feel the same.
Yeah, on the bright side.
Yeah, this music here became my only lifeline.
Think I'm going crazy, I'm not in my right mind.
Yeah, welcome to my life, welcome to my life, yeah.
Welcome to my life, welcome to my life, yeah.
Welcome to my life, welcome to my...
The old forgotten V-Rod.
Yes, you guys haven't forgot about it because I haven't posted anything about it.
But for me, it has been six months plus probably since I've had it.
Started doing a little bit of stuff with it and then honestly just put it on hold
because I had other projects that I needed to get done.
Which I still have those projects, but I've gotten some projects done anyways, regardless.
Something I do want to work on today, there is a crack in here.
You can see the bike has fallen over and what happened is this got jammed.
All the weight landed on it and pushed this.
You can see where it's dented part of the muffler, it's scuffed up.
This is actually the brake lever, scuffed up the brake lever and essentially cracked here.
Of course, they recommend do not try to weld it, just replace this piece.
That piece is about $500 and I think I can weld it.
So the side of this front radiator has to come off.
Yeah, looks like an Allen wrench.
The side cover is off.
Now this is brake fluid, it's one of the reservoirs.
Took the lid off and honestly, I don't know really what brake fluid is supposed to look like.
Don't know if that looks good or bad, but we're going to dump that out anyways.
All right, I'm taking this off.
The video that I saw, it was not like this.
The guy just took a bolt out of here, but I guess because I have this peg,
I'm going to try to take it off here.
See what happens.
So that screw came out and this came out.
Well good, that does not look bent to me.
Maybe just a little dirty.
Thankfully that looks straight.
Hey, maybe that's out of the way.
See, I drained that already.
You can see that a little better.
No, I guess I still probably need to take that off down here.
All right, I disconnected the brake line here and now I'm having to disconnect this whole
brake mechanism, I guess, from the lower arm rail.
So then I'll have it completely out of the way and then I can
go ahead and take off the lower arm rail.
There we go.
All right, sweet.
Next, I'm going to take out those.
There's two there and there's two underneath.
These are on these a little hard, so I got to use a bar to get them loose first.
Now I should be able to get them the rest of the way with the impact.
There we go.
So there's the two here, two up there, and there's actually one underneath.
Well, that one wasn't on very tight.
All right, well, looky, looky.
There it is.
Let's see where it cracked.
Yes, it is dented and bent in, but other than that, I think it looks pretty good.
Let's see what kind of welding job I can do.
I'm not much of a welder, but I've welded a few things here and there.
So there's the gap.
I'm going to try to hammer it back over a little bit without doing more damage.
I was afraid that was going to happen, so I just busted it off.
Well, we'll see how good I can weld it straight on.
So I can clean up the edges now a little bit.
Grinded on it a little bit, cleaned up the edges a little bit,
got some of the paint off around the edges, but kind of right in here is this little weird
where it kind of was in a bind.
I tried to clean that up a little bit.
Maybe it'll be a little bit smoother.
Lay a bead down and weld this thing back.
I'm going to grind on this a little bit more.
Take a little bit off the top.
Let's see if I can pull part of that and dent it in.
There we go.
I think that'll work.
So here's what I'm looking at.
Obviously, there's a gap here, but it's pretty flush over here.
It's probably not going to be the prettiest thing, but I think it'll work.
That's why it's been a minute.
It's pretty bad, but I'm going to clean it up.
I'm going to grind it down and probably redo it.
Oh guys, don't judge me.
Don't judge me.
I know it's bad.
It looks like a kindergartner could have done better.
Maybe could have.
All right, let me try to clean that up.
Well, I cleaned it up a good bit with the grinder.
Just kind of smoothed it out.
I mean, it was pretty rough.
It's actually not too bad now that I got it grinded down.
Cleaned up a little bit.
Still see some spots that I need to go back and hit.
Some cracks and holes maybe.
All right, after round two of welding and grinding.
Cleaning it up a little bit.
Looks better.
And obviously if I would have welded better, I would have had less grinding.
Still a little bit.
I see a couple little spots maybe.
Pretty good.
Not not perfect, but overall.
Overall, I think it turned out pretty good and it should work.
That's the most important thing.
I'll get it painted looking better.
Should I have a new one?
Yes, but I have a feeling this bike is going to lay down again.
You know, I am kind of a beginner.
So if this bike falls over one more time, I don't know if that'll hold up.
It may may crack, may break.
I may have to get another one, but I didn't want to spend $500 on one
and it still fall over and crack again.
But there's not a whole lot going on with that.
I mean, yes, it's the brake, your foot brake,
but I don't think I'll be having a whole lot of pressure on there
other than if the bike falls, then it will snap.
Other than that, it feels solid.
It should be good to go.
I will get it all painted, put back together, and then we'll test it out.
All right, so it's the next day.
Went ahead and painted the lower arm.
It looks so much better.
Let's check it out.
Still obviously not perfect.
You know, my grinding kind of makes it look kind of rough, but I think it's solid.
It should work for my use.
And again, now that it's painted from a distance, not too shabby, not too shabby.
Lift up a little bit, relieve the pressure.
I'm going to loosely tighten them up for a little bit.
Just kind of get it all lined up.
And then I'll torque them.
I think it's 50 pounds of pressure.
50.
And I'll tighten up the one underneath.
I went ahead and touched up the paint on this as well.
The brake lever and the...
I'm not sure what you call that with the brake fluid reservoir.
No, that's the reservoir.
I'm not sure exactly what that is.
And as well as the foot rest.
So those got touched up.
Kind of a last minute thought.
I should have done it sooner.
All right, so let's get it installed.
Put a little WD-40 on this.
There we go.
And that's back out.
So with my particular setup, it just has this little tightening screw
that tightens the peg on.
Just an Allen wrench screw that just tightens down.
It looks good.
Looks right.
Now I got to connect that obviously.
It's not connected here yet.
So far so good.
Now to add some DOT 4 brake fluid.
I got to bleed it.
Well, I thought I'd fixed my problem.
It looks good.
I mean, the bar is nice, black.
Everything got installed.
But I don't know if you can see that.
It is not budging.
So I thought, well, maybe I just have to bleed.
The lines properly, do all that, did all that.
Every once in a while, if I loosened, if I loosen this bottom nut down here
and gave this a little bit more play, I could get it to go all the way down.
And I just couldn't figure out what was going on.
I thought maybe it was pressure.
But after lots of troubleshooting, I think, I think I know what the problem is.
I think I'm a little off with my angle on where I welded this back together.
I didn't think it mattered as long as this went in.
But the more I played around with it, I think this angle is off a little bit in causing
this mechanism that goes up and down.
Basically, this pump, this cylinder basically to go up and down.
I think it's putting it in a bind.
So I think I've got to take all this back off, cut this off and change my angle.
I think it needs to go back this way just a smidgen.
Oh boy, I'm not looking forward to that.
But I'm going to take all this back off, cut that part off,
see if I can get the angle a little bit better and try it again.
And if that doesn't work, just scrapping that, I guess, and buying a new part.
Let's hope this works.
New day, back working on the V rod.
So I was showing you in that last clip,
I think where I put that little extension was a little too low.
I think it needs to be a little bit higher.
And I also think it was still slightly angled.
So I took it off, I cut the little spot welds off and just grinded everything down.
Let me show you what it looks like.
So here's what it looks like now.
As you can see, I grinded it back down.
You can kind of see, I think, where the original hole was, which is pretty important.
Tried to flatten that out.
I think that was a little angled.
So now when I line that up pretty much with that hole in there and then I put my level on it.
Well, first let's show the level.
See, it's level.
We're level.
So everything's level now.
I think that was a big part of it.
Now just need to line this hole up, these holes,
because I think that was a little bit of an issue as well.
Again, me being a newbie on all this,
I didn't realize the importance of everything being completely lined up.
I really didn't think about it affecting the brake.
It just maybe puts it at a little bit different angle,
puts a little bit in a bind with that cylinder.
Just doesn't want to go up and down in the master cylinder.
So I'm learning.
Everything probably should be exact the way it was and I didn't.
Well, it was kind of broken, but I probably still could have got a pretty good
look at where everything was.
So if you ever do this, make sure, learn from my mistake.
Line everything up right.
Get all your measurements.
Make sure all your angles are right before you go ahead and cut it all off or whatever you do.
I went ahead and ordered another lower rail arm that was used on eBay
because I'm not real confident in my ability to get this exactly right.
And I thought, well, now I'll have two.
I'll have one that I can actually measure and see everything the way it's supposed to be,
how it lines up, the measurements, the angles, all that good stuff.
And then I have a spare if the bike falls over and it snaps that again.
I'll have a backup, I guess.
But I really want to get this figured out before that comes in.
I just ordered it last night.
So let me spot weld this and let's check it again and see where we are.
All right, well, I did figure out something.
So I put it back on.
I was still kind of having the same problem.
I had a little bit more play movement in the brake lever.
But I've now realized that it's the angle of that master cylinder.
I think it's called the master cylinder.
The master cylinder.
Let me show you what I'm talking about.
So here I have it back on.
I have the nut tightened up where it's sitting, kind of where it's supposed to be.
That looks a whole lot better.
Again, it's just spot welded because I'm just trying to see.
And you can see the brake lever doesn't really want to move.
And my issue is this is kind of getting in a bind, I believe.
Like it's not, it doesn't want to go in there smoothly.
So here's what I did.
If I loosen this up and then I kind of wiggle this and I change the angle and I lower this down.
I don't know if I can do it with one hand.
Push the angle down on this.
Now my brake lever will go all the way down.
All right, so here's what I'm talking about.
So I loosened that nut up.
Now I can change the angle of this brake master cylinder.
And when I push it down at a flatter angle, now my brake will actually go down
to where it needs to be.
All the way down.
Versus when it's up, it doesn't want to go.
So I don't know if this got bent.
I don't know if I don't have this angle right.
I don't know if inside's bent.
For whatever reason, that does not want to go.
But if I push it down, it allows that cylinder to go more directly.
So my guess is I need to rotate this back that way.
I think I've taught myself into that.
So here's what I'm thinking.
This, I need to rotate it back this direction.
So instead of it being in direct line with these bolts,
it needs to turn and come back this way a little bit.
That'll bring that shaft up and I think help it go directly in.
New day, same problem.
The last time I was working on it, I did the little spot welds on it.
Thought I had it lined up right, but it still wasn't working.
Looks better as far as the positioning, but it's still,
something's not right because the brake was still not going all the way down right.
So obviously I had something wrong.
I mentioned to you guys that I had ordered a part,
a replacement rail that should be never modified, broken, worked with.
So that's what's in that package.
Let's open it, take a look at it, see how different it is from this
as far as the alignment measurements.
And then I'll know going forward exactly where that thing is supposed to be
if it ever breaks off in the future.
Well, they definitely packaged it well.
All right, boys and girls.
Looks good.
Let's pray this is the exact same one.
All right, here they are side by side.
Man, it looks like I was pretty darn close, but I was obviously off somewhere.
But I'm happy that that looks like that's the exact same piece.
So that should be it.
Now I just want to get some measurements and see where I was off because I'm guessing that's the
case.
If not, I have other issues I'm going to have to deal with.
We will soon find out.
So I just got done measuring and it is nine and a half inches from the middle of the top hole,
from the middle of this top hole to the middle of that extension.
It is nine and a half inches, which is exactly what I was guessing.
And I did that one.
However, it is not completely straight out at a 90 degree angle.
So you can see this square.
I don't know if you can see it on camera, but you see how that is lined up.
My edge is lined up and it should come out, but it actually drops a little bit.
So that may be where my issue was, is that is slanted down just a smidgen.
We'll try to put a level on it so you can see a little bit better.
So that's pretty straight.
So the level is not centered, but when I raise it up, now it is centered.
So it definitely slopes down a little bit.
Now I want to measure the length of this.
After I compared the new rail to the one I had, man, I think I was very,
very close to having it exactly the way this one is.
It's not like at a 90 degree, true perpendicular to the rail.
I'm guessing this hasn't been re-welded.
I hope that's right.
And mine, I got perpendicular.
So I don't know if that little slight angle is what's affecting it.
Perhaps.
I'm kind of hoping because I'm about to put this on.
If it doesn't work, I'm going to be very discouraged.
So let's put it on.
See what we got.
All right, about to find out moment of truth.
Pin it back in.
Clean out that hole as much as possible.
Just don't want any dirt, anything in there.
Oh my goodness, I'm nervous.
All right, here we go.
Brake pedal, please go down.
Yeah.
Oh, hallelujah.
Hallelujah.
Yes.
Oh, I'm so happy.
So that's what it was.
It was just a smidgen off.
And that little smidgen was causing this not to work.
So if you ever replace your lower rail, if it's not the right angle,
it's going to give you brake issues.
And I thought the whole time that it was something to do with.
I didn't believe the brakes right.
Or maybe I messed up the brake lever or something.
Or the pump, even the cylinder.
But no, none of that.
Well, actually, I don't know.
I haven't tested the brakes yet.
But the lever is working exactly like it should.
Yes, victory.
Okay, let's get brake fluid in it.
Get it all back the way it needs to be.
And yeah, that's it.
Well, I finally finished that little project.
The lower rail is on.
The brake works.
I just pushed it out and tested.
The brake is actually working.
It took me a little while to bleed the brakes to get it to flow right.
I don't know.
You know, I tried doing it manually like I saw someone do it on YouTube.
But I just really couldn't get it to work.
I don't know if there was just maybe something clogging.
But I felt like I needed that true vacuum.
So I bought a little $25 Harbor Freight vacuum handheld.
It ended up working pretty good.
It ended up pulling the brake fluid through.
So I know that was flowing.
I still feel like the brake is a little spongy, if you will.
But when I backed it up, I mean, it was grabbing.
It was fine, I guess.
Maybe I'm just a little paranoid.
Thankful to have it all back together.
But I have to give it a little test ride and see how it does.
Obviously not go too far.
Just to make sure everything's good and go real slow.
And then begin some of the other work that I want to do on it.
Do need to change the oil.
Bought this stuff a while back.
Just never did it.
And then some of the other little customization I want to do.
All right.
That's it for this one.
Hope you learned something.
Learn from my mistakes.
Again, the rookie here.
If you got some tips, tricks, other info, put it in the comments.
All you V-Ride lovers out there.
Much love.
We'll catch you in the next one.
Subscribe.
My man, Murph Squad.
Let's go.
Shout out to the boys.