The cheat code to EASY Cinematic Videos

Photo Camera Landscape Expert
201 followers
#PhotoCamera, #LandscapePhotography, #PhotographyExpert, #NatureShots, #ScenicViews, #OutdoorPhotography, #CameraGear, #LandscapeExpert, #TravelPhotography, #WideAngleShots, #PhotographySkills, #NaturalBeauty, #CameraTips, #PhotographyMastery, #LandscapeLovers
So, you want to make cinematic videos like this?
Well, go get your camera and let's get it set up.
And this tutorial is brought to you by K&F Concept.
So, there are three to know, two of which if you don't want to color grade,
and one if you want to color grade.
And the most common one, if you don't want to color grade, is going to be S-Cinetone.
S-Cinetone is designed to give your footage a natural,
soft, filmic look without any heavy color grading.
And it is based on the color science from this big camera,
the Venice, that shot movies like these.
And it's usually labeled as PP11 on our smaller cameras.
And another picture profile to check out is FL, which stands for film look.
And FL is actually located in creative style,
rather than picture profile, because it's technically meant for photos.
It mimics old film stock by toning down some colors
while enhancing the sky, the greenery, and contrasts.
Now, quick note, if you own a ZV camera,
you'll actually have access to extra film looks under the CineVlog feature right here.
But to get the best color,
you'll want to film in S-Log3 with S-Gamut3.Cine and color grade it later.
It's a flat profile, but with a ton of hidden color data
that allow you to push and pull the color and light to however you want.
And depending on your camera,
it will be either under PP8 or you can find it in log shooting.
Now, what's really helpful is that newer Sony cameras allow you to load in LUTs
so you can preview what your footage looks like as you're shooting.
No guesswork needed.
The LUT doesn't actually get baked into your footage,
so you'll still get that flat log look once you load it onto your computer
For beginners, I highly recommend these free cinematic LUTs from Alistair Chapman.
Hi, I'm Alistair Chapman.
Download it, try it for yourself, and if you enjoy his LUTs,
consider buying him a cup of coffee.
P.S. I have no affiliation with him, just passing on good free resources.
And that's great.
Now, with S-Log3, you do have to overexpose while filming
to get the maximum amount of dynamic range, around plus 1.3 to plus 2.
So watch this number here.
And to avoid seeing too much noise in your footage, shoot at the base ISO.
It will be either 640 or 800, depending on your camera.
And some cameras have a second base ISO that goes higher, like the ZV-E1, which is 12,800.
Google search or chat GPT to see what's your second base ISO for your camera.
If you're not color grading, choose XAVC HS 420 10-bit.
If you're shooting S-Log3, choose XAVC HS 420 10-bit.
This will give you the most data color pixels to color grade.
24 frames per second is the movie frame rate.
Majority of the movies that you watch in the theater are shot on 24 frames per second,
and the most cinematic creators will prefer 24.
Nailed it.
30 is the online video frame rate,
which is what we at the Jason Vong channel uses because we're a rebel without a cause.
Either way, you just want to make sure that your shutter speed is always double your frame rate.
1 over 50 for 24 and 1 over 60 for 30 for the most smoothest and the most natural motion blur.
But if you shoot under, congratulations, you're the next Wong Kar Wai.
Otherwise, if you shoot too much over your shutter speed,
your footage will look like this, and this will be considered weird.
Or maybe it will be considered new wave.
Now on that note, when you're filming outdoors with lots of natural light,
it is impossible to keep your shutter speed doubled.
So it's recommended to get a neutral density filter.
And our sponsor, K&F Concept, has a magnetic variable ND filter,
which is basically sunglasses for your lenses.
It cuts down the amount of light entering the sensor
so you can achieve the proper shutter speed for your frame rate.
And you can easily detach the filter when you don't need it because it's magnetic.
And for this next part right here, you don't have to do this.
But a lot of cinematic creators also love to add a mist filter as well for an even softer look.
Off, on.
You see what it's doing to that clock light right there?
Making the highlight just a little bit softer.
And I recommend getting between 1 over 4 or 1 over 8 so it's not that intense.
And I will link the K&F Concept ones that I use in the description box below.
Slow motion.
There are two more frame rates that you need to be aware of.
60 and 120.
60, you can slow it down two and a half times on a 24 frames per second timeline.
And 120, you can slow it down five times.
And same thing, your shutter speed should be double the frame rate.
1 over 125 and 1 over 250, respectively.
Now, I will say this.
Don't get caught up with getting the most correct setting on your camera.
I know we talked about doubling your shutter speed
and shooting at the two base ISO for the least amount of noise.
But at the end of the day, it's all about capturing the moments.
Getting the shot and the candid moments is far more important
than nailing the correct camera setting.
And here's the honest truth.
Most people often confuse cinematic settings as the color or the look.
But really, it's about invoking emotion and immersing your viewers into your story.
The settings that I introduced today is the framework
to get you started on the cinematic look.
But the cinematic feel is up to you.
So let me share with you a few more tips on enhancing the cinematic feel.
Have at least three angles.
A wide, a medium and a close up.
Having shot varieties not only will help you with pacing and audience retention,
but it will also make your editing life so much easier.
Have one interesting angle.
Now, the online cinematic community loves having that one interesting angle.
For example, this overhead shot.
Or this shopping cart POV shot.
Or even this camera POV shot.
And rotate.
And you can achieve shots like these with a suction cup mount
or this magic arm mount, both from K&F Concept.
They're so simple to use, but they add so much creative freedom to your shots.
Plus, they're tiny too.
Tripod.
But nothing beats a tried and true tripod shot.
In film, we call this the locked off shot where there's no motion at all.
Rather, we let the motion happen in the scene.
And these types of shots are more powerful than you think.
But the only thing that you need to make sure
is that there are visible motions in your shot.
Because otherwise, it's just a picture and not a moving picture.
So have fun with it and remember, you can't go wrong with Jason Vong.
By the way, if you dabble with lighting that takes a V-mount battery,
consider the one from K&F Concept.
It has a nice handy LED display to show you how much battery life is left
and it's versatile enough to also charge your laptop.
Peace.
