3 Basic Camera Settings Every Cinematographer Should Know

Filmmaking Techniques
4 followers
This video is sponsored by Squarespace, the all-in-one platform you can use to build a
website for your business. The first step to being a good cinematographer is to understand
how images are created. You need two things, a photosensitive surface, like a camera sensor or
a piece of film, and light. How much light hits the sensor and the sensitivity of that sensor
determines how an image looks. This is called exposure. If too much light is used the image
will be too bright, and if too little light is used then you won't be able to see anything at
all. Therefore cinematography is all about controlling light. In this video I'll take
you through three of the most important camera settings that will allow you to control the
amount of light that is let into the camera, ISO, shutter and aperture. This is sometimes called the
exposure triangle. If you've ever used a consumer camera you may know that there's an auto mode that
will adjust all of these settings for you. So you may be thinking why not just use that?
I'd say there are two main reasons why changing the settings yourself, called manual exposure,
is the preferred method for anyone who wants to take image making seriously.
Number one, when you put the camera in auto mode you are basically giving it permission to
constantly change and adjust various settings at will to get you to an evenly exposed image.
The problem with this is that we will often be able to see the video footage changing from dark
to light as it adjusts settings until it finds a level it's happy with. This can be very distracting
and breaks the illusion of filmmaking, taking the audience out of the immersion in the story
as they say to themselves, okay this was obviously shot on a camera.
Number two, cinematographers want to be able to precisely control how they want the image to look
and not leave that decision up to the whims of a camera. They may want a comedy to look light and
bright, a drama to look dark and moody, have a deep depth of field where everything in the image
is sharp or make the background soft, blurry and dreamy. ISO, ASA or EI are all terms that refer to
the sensitivity of a camera sensor or a film to light. The higher the ISO number is, the more
light will be taken in by the sensor and therefore the brighter the image will be. And inversely,
the lower the ISO, the less light it absorbs and the darker the image is. Therefore it's common
to set the camera to a lower ISO when shooting outdoors in bright sunlight and a higher ISO
when shooting in darker conditions at night. However, higher ISOs come with a trade-off.
The more that you increase the setting, the more digital noise, those little dancing grainy specks
you will see. Most digital cinema camera manufacturers will recommend shooting at a
base ISO or a native ISO. Although this differs for each manufacturer, base ISOs usually offer
the best trade-off between a high quality low grain image and a good dynamic range.
For example, most ARRI cameras have a native ISO of 800. Some cameras such as the Sony Venice 2
also have what are called dual base ISOs, such as a lower native ISO of 800 and a more sensitive
native ISO of 3200. So when setting up your camera to shoot each shot, you need to pick an ISO based
on two factors. Firstly, consider how much noise or grain you want the image to have and secondly,
decide how sensitive you need your camera to be to shoot in the lighting conditions.
And if you're still in doubt, it's probably best to set and leave the camera at whatever base
ISO the manufacturer recommends, keeping the noise as clean as possible and rather adjust
other settings. But before we get to those other settings, I'd like to thank Squarespace for
sponsoring this video. As you know by now, Squarespace is the platform that you can use
to set up a great looking website all by yourself, perfect for cinematographers, photographers or
filmmakers. You need a place where clients and collaborators can come to view a portfolio of your
work to get a feel for what you are able to do, with a contact page so that they can reach out
and employ you on the next job. You can set this up using Squarespace's galleries that allow you to
To set up your website, be sure to head to squarespace.com for a free trial and when you're
ready to launch, go to squarespace.com slash indepthcine to save 10% off your first purchase
of a website or domain. Instead of changing the sensitivity of the sensor, another way of
exposure is by controlling how much light hits the sensor. This can be done with the shutter,
a section that can open up to expose the sensor to light, or close and prevent light from entering
the camera. This setting determines the duration for which a camera's sensor is exposed to light.
In photography this is measured in shutter speed, the time a single frame is exposed to light,
by quickly opening then closing a rectangular blind shutter.
Usually this is measured in fractions of a second, like 1 over 100.
Cinema cameras need to shoot multiple frames within one second, for example 24 frames,
therefore they need a differently designed shutter, one shaped like a circle that can spin.
More or less light can be let through depending on what angle is cut out of the circle.
For example 180 degrees may be cut out so that each frame is exposed to light for half the time
by the open shutter, and not exposed to light when the closed half passes the gate. Or a 45
degree angle can be used where only a narrow sliver of the shutter is open. This means that
each frame is exposed to light for one eighth of the time. Less light means the footage will
be darker and it also makes motion feel more choppy. A 180 degree shutter angle is most
commonly used because it gives the footage a normal feeling of motion that is not too
jerky or too fluid. Modern digital cinema cameras don't have a physical shutter that
opens and closes, but it uses the same principle by telling the camera's sensor when to collect
light and when not to collect light. If using a camera with a shutter speed setting,
a good rule of thumb is to set it to be double the frame rate to get a normal feeling of motion.
So if shooting at 25 frames per second we will set the shutter speed to 1 over 50.
Then if the camera increases its frame rate to 50 frames per second,
we will double that and set our shutter speed to 1 over 100.
Moving even further away from the sensor we get to our final important camera setting that
controls exposure, aperture. This is the size of the opening at the front of the lens through
which light passes to get to the sensor. The size of the hole is controlled by iris blades
narrowing or opening and is measured either in f-stops for photography lenses or t-stops for
cinema lenses. The wider this opening is the more light is let through and the lower the stop value
is. On the other hand the narrower the iris is the less light it lets through and the higher the stop
number is. Each stop represents a doubling or halving of the amount of light that hits the
sensor. So to make the image brighter we need to decrease the stop number by doubling the
light let through, for example from 4 to 2.8. Or to make the footage darker and cut down on
half the light let through we can increase the stop from 2.8 to 4. The aperture setting is a
effective way of changing how bright or dark an image is. However aperture also has another
secondary effect on the image. The wider the iris is and the lower the stop number, the shallower
the depth of field will become. In other words a lower stop number means that more of the background
will be out of focus. Since cinematographers often like to shoot with a shallow depth of field
that makes the background look soft and focuses on a single subject,
the camera is often set to a low stop number such as 2 or 2.8. But this runs us into a snag.
We've set the ISO to the base of 800, we've set the shutter angle to get normal motion at 180
degrees or 1 50th of a second and we've set our aperture at 2 to get a shallow depth of field.
However the image is still too bright. How do we make it darker and get it to the level of
exposure that we want without changing our other settings? We can use what are called ND
or neutral density filters. These are pieces of tinted glass which are either placed in front
of the lens or inside the camera behind the lens that decrease how much light is let into the camera
without changing the colour of the image. Adding a stronger tinted ND filter will take away more
light, while a weaker strength filter will take away less light. Each stop of light taken away
is represented by a value of 0.3. So most cinematographers will set the camera with a
to keep the same grain, shutter to keep the same feeling of motion and aperture to keep a shallow
depth of field for most shots, then use ND filters to cut down on how much light enters the camera.
I'd like to specially thank all the Patrons for your continued support of the channel
and also thanks to the amazing YouTube community who watches these videos.
Otherwise until next time thanks for watching and goodbye.
