How to fix a sagging door

VideoJoeKnows
63 followers
1 Video View·Apr 28, 2026
http://www.VideoJoeKnows.com How to fix a sagging door is something every weekend warrior needs to know how to do. Joe has shown a few different ways, previously, on how to fix a sagging door....but this different way may be just what you wanted &/or needed to see! fixing a sagging door should take an afternoon to complete. & guess what? If an average "joe" can fix a door that's sagging....so can YOU!
http://www.VideoJoeKnows.com
Still messing around with this front door. Remember it was rubbing at the bottom there
and I look on the side and I can tell there's a big gap there between the door and the edge of
the door jam and see up there there's hardly anything and so I know that that door is sagged.
I also look over here and double check and sure enough I got a big gap right up there
see how big this gap is right there that means that I can push that further over there and if I
do that then this edge of the door will go up right we'll go over and we'll raise the bottom
of the door up you got any questions with that I've got three or four two or three videos that
talk about sagging doors and how to fix them but I've never showed you a couple things I want to
show you now more tips for you now before I told you how to pull these hinge pins I told you to
put a little nail down underneath there and hold it with your hand and try to tap on it and stuff
sometimes it comes off and you could pinch your finger on there especially when you do
the middle one and the top one okay so I've got a trick for you what we first want to do is open
the door okay got the door opened here now I'm going to start at the bottom I always take the
bottom hinge pin off first I got a little nail like this I wanted to make sure it fit in the
bottom sometimes the very bottom has another little pin in it and then you got to fit it in
there but this is what I'm going to do so I got my cutters here and I'm just going to hold that
like that okay hold the nail like that then I can then I can hit the cutters right and not my finger
just hang on to it okay and it's real simple to do it that way now I'll just hang on to that
imagine that being your finger and you're missing or something
okay I'll do that up here at the top even just hold that there
gives me more room I can actually tap here away from the door
not get right up there thinking I got a glove on the door okay now from there I can take my
screwdriver and hold it on you know kind of how I do I hold it at an angle
put that on there hold the whole thing then I can tap on it and take it up just be careful
with those I got a hardwood floor so I'm going to set them on here if you got carpet I would never
have you put those directly on the carpet because there's grease on them there can be
okay just kind of hold it all in one go like that okay because I'm going to take this door off
because I'm going to show you another way how to get this sag out of this door
and it's slightly different than how it showed you before okay before I just opened the door
and put and did it differently all right just follow me here in fact you know maybe I should
leave that on there just for a second so I can maybe explain this to you let's see if I can't
explain this to you okay the hinge pins that are on the frame I look and I can see
that the ones on the frame is the very bottom middle top the two here are on the door okay
and I and there's a gap here when I close the door remember well I can I want I want that gap
to get tighter all right so I'm going to tweak this hinge that's why I have to pull it down I'm
going to bend this knuckle towards the right this way and this one this way just a little bit can
you see if I do that that's going to allow the rest of this door to get closer over to that edge
that's what we're going to try see what happens all right let's get this door down
and I thought I was going to have this done before dark that's why I got the construction
light on and some lights on here got a little shadow on here but you know you'll you'll see it
okay so I'm going to pull this door down here got to be careful with it I think there's something
on the other side that's hanging on here better pull that off okay now I'll have to set this down
and swivel it down without hitting anything you know just make sure you're careful with what
you're doing okay get me a rag put it up against the wall here all right get you in here a little
closer now okay there's the two knuckles right there and I'm going to take a little pair
of a little crescent wrench like that some people call it a spanner
okay then I can then I can kind of set it on here and probably upside down
you know and bend it right down here in the middle you know what I mean let's get you situated
just a little bit further over here see now do you see what we're going to do here
remember I want to get these pushed down you want to make sure you don't do them the wrong way if
you needed if you need to increase the gap yeah too big of a gap you could go the very opposite
you know come up with them but I want to go down a little bit I want the crescent I see I don't
want to I don't want to use the pliers on that or vice grips or something because I could mark
this up with the crescent wrench it's nice smooth I want to look at the screws here and all the
screws are tight looks like because if those were loose you could teeter-totter this and maybe
get the knuckle out of whack okay now this is just yeah I'm going to put it on there like that
and I'm going to push down on it I want to try to get into the middle of the of the knuckle if I
get on the side I'm going to tweak this sideways you know and so I'm just going to try to put some
force on it and bend it a little bit okay I didn't bend it very far did I might have to bend it a
these are a little stiffer than some other ones I've worked on okay that one went I'm going to
do that a little bit more over here okay I think that's all I'm going to do I'm going to try that
we're going to see what happens here okay I'm going to leave let the camera roll shall I
let's see if I can back it up far enough okay let's see what that does shall we
now once I once I put it back up there obviously it's a trial and error we're going to see if that's
far enough okay now when I put this back on I start from the top and work down I've seen some
people do it at the bottom and they just fight themselves with that you know it's always best
to start at the top and lift it up hold it up there I don't care about I don't care about my
other hinge pins just yet I just want to get the top one piece in half you know down a little bit
that's it now I can come over for the middle and look and see what's happening okay lift up on it
a little bit my pin on there you probably can't see this because I got you behind me now let's
okay here you go all right now on that bottom one I just have to pull the door out a little bit
line that up okay I can take my hammer handle and I don't want I don't want to go down all the way
just yet in case I have to pull it back up right okay but I want it down far enough so I know
that's going to mimic exactly how the door is going to close this one
to go this way that's probably good enough okay all right now I'm going to close this door
and see see if it closes any easier look at that look at that nice now you see
here's the gap at the bottom still about the same it's a little bit less okay now look at the top
nice gap there see that's because I moved it over you see that gap there it's a little bit closer
in it now I could go truthfully I could go a little bit more even but I think I'm going to
keep it right there and here's a couple reasons why this door in the past has sagged whoever
installed this door they've got this top rail it's bowed and this top header is bowed down
and I already rasped off the top of this door because I had had I not done that to lift the
door up it would have hit the top now usually you've got a big gap there you'll have a big gap
over here and actually a small gap you have a bigger gap there when the door sags and you push
it back up it shouldn't line up okay if I push this any further probably what's going to happen
is the top edge of the door is going to hit because whoever installed this they didn't do a very good
job I'll show you what I'm what I'm talking about okay see that right there see the gap at the top
of the door right right there if I lift the door and push it over to the hinges more it's going to
raise this up and I'm going to hit right there that gap is hardly anything I should have about
a 3 16th and 8th inch to a 3 16th gap there and I got less than a 16th there and if I go up any
higher if I tweak this hinge over here to the left any more can you see the top edge of that door is
going to lift higher okay and at the bottom this door has weather stripping on the bottom edge of
the door that's not adjustable lots of times the bottom edge of a door like an exterior door will
have a door shoe that you can slide on the on the door and maybe lift up and adjust push down and
in lots of times the screws are on the exterior side not on the interior side and then you can
raise and lower the shoe the shoe has the rubber gasket on it okay well this in this case we don't
have that we've got the gasket on the bottom of there so if I if I raise that door up any higher
that gasket is not going to rub on the threshold you see what I'm saying this threshold there
it's dark out there now okay see this wood this wood threshold right there I want that
weather stripping on the bottom of the door to still hit that don't I
before was hitting it really super hard now when I close the door can you hear that
it's still rubbing but it is way easier oh they're gonna like that I think I'm gonna leave it right
there check that off my list now before you think you're done with this door go ahead and tap this
down now I can tap it down with my hammer handle because if I do this I might rub my hammer on the
trim on the door on the stain grade door on the paint grade door whatever and so I like to use my
hammer handle same thing with right here I can just set it up here and hit it down
you know I could I can't really do that on the top because I'm not tall enough
you know and even if I got up there on a ladder I guess I guess I could do it
I was up on a ladder you stay on the top when I just tap tap tap okay and this was on there
from before that keeps the door when it opens to only open so far that's kind of what they
decided to do on there so because that was on there I left it on there you see when you open
this door it's only going to open that far and we don't want it to open any further because it
could hit this this column that's why they did that okay usually you got that uh where a door
is up against a uh a glass uh sliding glass closet door let's say you've got an interior
bedroom door that goes up against it you generally use something like that okay
all righty I think we're done with that let's get on to something else shall we
if you're the type of person who's like hey Joe just get on with it and show us I like to explain
things like this I mean not everybody would have realized all the ins and outs and the reasons why
for this that and the other thing and so I think sometimes the more I talk the more you learn
other times the more I talk the more I bore you but hopefully you keep in mind I always have your
best interests at hand that's all I have for this time and I'll be back with more videos
