Reality Joe....Episode #35....How lag bolts & lag shields work

VideoJoeKnows
61 followers
1 Video View·Apr 28, 2026
http://www.VideoJoeKnows.com Reality Joe....Episode Number 35....how lag bolts & lag shields work is explained, in this short video. Joe's Reality is that he has, no he gets to help his Pop with a howto/DIY project. Joe will be using lag bolts & lag shields for this upcoming project. Have you ever wondered how a lag bolt goes into a lag shield & what type of lag shield goes for what size lag bolt & what size drill bit to use? Decision time! http://www.VideoJoeKnows.com
hmm hello mother hey oh watch your language
what are you got this thing on what are we doing what are we doing here we're gonna you got a you
got a gun safe here you wanted it bolted down to the floor right safe okay and that the holes are
down there already drilled uh-huh sure enough there's no they're not drilled they're drilled
yeah i see there's there's two holes it's a little dark down there but i see
there's two holes so so you want that bolted down to the floor right
yes we have everything available this is carpet with pad how did you want me initially to do that
well you thought the market you thought i could just drill some holes right down through there
and we could we wouldn't even have to move this up we can't do that because if you drill holes
through the carpet it's going to zip the carpet and pull strands out that's right
there's no way you're going to do we have to mark it first that's right we're going to have to mark
that and you know how you have to cut it we're going to mark it so we're going to take a felt
tip pin yeah that's probably the first thing we're going to do yeah and before we before we do that
you wanted you wanted me to use a regular little drill on that you thought i was going to buy a
drill bit at the store huh concrete drill bit can never do that remember i showed you that
we went to the store i even had to show you because you didn't believe me there's little
concrete bits you can get for your drill but it's only for concrete block and maybe brick
and also tile it's not going to be something like that you've got to use a roto hammer
and we try to rent a roto hammer too didn't we 40 bucks for four hours 40 bucks for a roto hammer
to rent it because we don't have a roto hammer but you came up actually both of us came up with
a pretty good idea right i asked you if you knew anybody oh yeah i had a roto hammer so you called
up a couple buddies of yours and they both of them had them and both of them had them and so
you went down and picked up a roto hammer yes and we're saying we're going to save 40 dollars
because we didn't have to rent a roto hammer and this is a roto hammer right here and it uses
special bits and we're going to use a bit like this and see how the end's got a spline fitting
on there and when you drill the holes with the roto hammer it kind of bounces you know really
super fast and that breaks the concrete up and that's what we're going to end up using you said
also don't drill so deep to go through the slab you're not going to worry about that we're not
going to drill three and a half inches oh we're going to drill yeah we're going to drill three
inches here's well you remember here's the big bolt no here's the big one right here well yeah
but i've got these are the these are the new ones you bought and here's here's what i'm going to use
they're lag shields and it came with some plastic it came with some plastic anchors
a joke there's a plastic anchor and they wanted us to bolt it down with the plastic anchors going
into the the lag bolt we decided against that uh kind of need to have a little bit solder
maybe something a little bit stronger than that i mean it would it would hold it would probably
work fine but we ended up deciding here let's let me get one of these out and show you what it is
it's it's a lag shield don't break it like the other and they got they have different types of
shields this is what we're going to use right here it expands as you put the bolt you put that you
put that in there like that and then the end starts spreading apart see and then that's what
that's what keeps it tight to the ground okay now when you get these you got to be really
careful what you get now see this one says three eight lag shield three eights short
and it's an inch and three quarters long and here it tells you what size to drill the hole
now we're using three eights because the the lag bolt this is called a lag bolt okay
this is use five eight use a three-eighths lag shield all right so you got that and then when
you buy this right here on the plastic says drill size five-eighths very important you drill
the hole the right size you don't want to guess on that okay so i guess we're about ready to do this
are you going to hold the camera for me and do all that maybe i don't know it's hard for me
you know i can i can set this up and do a few things without your help
okay so the first thing we're going to do we've got this we've got this cabinet placed exactly
where you want it right you got it you got it right up against the wall with the base
right against the right up against the baseboard there it's up against the baseboard on the back
and this sucker's heavy it just makes it so we want to do this right we're going to mark that
and then we're going to move it and drill the holes and all that so let's get going with the project
okay let's do it marker
