In this episode of The Test Lab, Chris and Yvonne of @Reclaimed Karma hang shelves and put drywall anchors to the test. What’s the difference between types of anchors and how do they work? Do the anchors hold as much weight as they say they do? Can they withstand the dreaded “Chris Test?” Let’s find out and get to work!
Check out Yvonne and Chris' drywall anchor guide to learn more about how to choose anchors for specific scenarios: https://thd.co/3Tco9mH
About The Home Depot: How doers get more done. We’re helping doers in their home improvement projects. Now you can take on more renovation projects with more know-how. Our step-by-step instructional DIY videos and expert advice will give you the confidence for your next project with hands-on learning. It’s a good time to be a doer.
We break down some of the tough projects
that you may encounter on the job.
I'm Chris.
And I'm Yvonne.
And this is the Test Lab.
Today, we're gonna talk about something really important,
anchors, which ones to use and when.
And in our world, this comes up the most
when we're asked to install floating shelves.
And let's be honest, we don't always quite know
what a customer is gonna end up installing on those shelves.
And the last thing that we want is to get a call
that the bump in the middle of the night
was the shelf that we just installed came tumbling down.
So you wanna make sure you pick the right anchor
for the right amount of support.
Otherwise, my bad.
Of course, when we hang things on a wall,
we wanna go directly into a stud,
but we don't always get that luxury
and we have to use drywall anchors.
But I've always wondered what actually happens
when you put the anchor in the wall.
By the magic of our Test Lab,
we're actually able to see what happens behind the wall
with the anchor.
Tap your plug in and then drive in your screw.
And here is where the magic happens.
So as you can see, the anchor flares out.
It provides a nice strong hold
for what we're hanging on the other side of the wall.
But remember, this is our lower weight capacity anchor.
Now let's try a heavier option.
So for our second option,
we're gonna go with something that can handle
just a little bit more weight.
This is one of my personal favorites here
because you don't have to pre-drill.
You simply just press it into the wall like so
and screw it in.
Now once you break the drywall,
you just wanna get it nice and tight.
And once you get it nice and flush,
you're ready to put your screw in.
And again, always like to hand tighten it
just to make sure you get a nice snug fit
and don't add too much torque to it.
I'm so excited what happens on the backside.
It's like I'm getting invited to the party
that I never got invited to.
This is what I always imagined
actually happened behind the wall.
The anchor just burst apart.
That's what provides the strength and the hold
for your heavier options.
Now let's take a look at
the heavy duty weight capacity anchors.
This is the bosses of anchors.
This is the toggle anchor.
This is when you're hanging your big boy stuff on the wall
that you don't wanna fall for your clients.
You simply just put it into the wall,
you screw it in.
But look, there's some key points.
You wanna make sure that you get these arrows
that are on the anchor up and down
so that the toggle that's on the backside
goes vertical as well.
And when you screw it in, it pulls tight to the wall.
Now you gotta finesse this.
You don't wanna blow out the drywall.
Now it's time to drill in our screw
and pull that toggle tight to the drywall.
So as you can see, our big boy anchor is performing
as we thought the toggle is getting tight to the wall
as the screw went through, locked in.
You don't have to worry about anything
on the other side of this wall going anywhere,
but you know what?
Let's put these boys to the test.
All right, it's test time in the test lab
and we're gonna test out the low capacity anchors first.
We're gonna go with two 10 pound weights, 20 pounds.
Boom, 20 pounds from a low capacity anchor.
I don't think you could ask much more of it.
That's a couple of books.
That's some pictures, you know, lightweight items.
All right, so we're on to anchor number two.
These are the medium capacity anchors.
My favorite, my partners.
Boom, 40 pounds, no problem.
It handled it well.
This is something that you could use in a kitchen
to handle some plates,
maybe even in a living room for some heavier books
or a trophy, definitely a champion right here.
And now for the bosses of anchors, the toggle anchor.
Let's see how much these toggles can actually tackle.
So we actually took the boss anchors to 130,
but the capacity says 100 pounds.
So we went well over what it said that it could hold.
So you can rest assured if you use these toggle anchors
in your client's home, the shelf,
whatever you put up is not going anywhere.
So if you have a client that's asking
for floating shelves on their wall
and you don't have the opportunity
to be able to secure it into a stud,
then the right type of anchor is going to be key.
When installing floating shelves,
remember there's a difference between sheer weight
and the weight that you're putting on cantilever shelves.
For good practice, always check the weight specs
of the anchors and the shelves that you're going to install.
So now it's time for the ultimate test.
I'm lovingly calling this the Chris test.
So hop on up there, big boy, let's go.
You see that?
I see that.
That's right.
I'm a little worried.
I'm not sure if it's going to hold all his weight
or he calls it muscle.
That's right.
The reason why I'm so excited about this
is because it's holding some weight.
Chris, do you want to tell everybody out there
how much you weigh?
Sure.
I am 200 and enough pounds.
If you have a customer that's asking you for shelving,
especially floating shelving,
you want to make sure you come prepared
with the right materials for that job.
Right.
Thanks for letting us walk you through all the ways
to help keep your customer's shelving on the wall
and off the floor.
Make sure to like and subscribe
and check out our other videos
for more important do's and don'ts on the job.
See you next time.