How To Do a Clean Burst Fade On Curly Hair 🔥 | Step-By-Step Tutorial

Hair Models for Men
14 followers
36 Video Views·Apr 28, 2026
Join The School of Barbering: https://www.skool.com/school-of-barbe...
👇🏻 Follow me on socials
Instagram: / _loscuts
TikTok: / loscuts_
Master this precise burst fade technique on curly hair through a detailed, step-by-step approach. Learn how to establish a solid foundation with expert shear work before transitioning to clippers for a clean, balanced finish.
Tóm tắt
Welcome back guys. Today we're going to be doing probably one of my favorite haircuts,
a nice burst fade on some curly hair. This client actually came all the way from North Africa and
it was his first haircut in the United States. So you already know I had to cook, but I used to
struggle a lot with this type of haircut. So I'm going to show you guys a really simple way that
I approach it, especially when it comes to the shear work and just my overall process.
So let's just get started. First thing I'm going to do is get the hair nice and wet
and really saturated. And then I'm going to go straight into my shear work. The reason I like
start with the shear work is just because it gives me a solid foundation before I even touch
the clippers. So I'm not going in, you know, later trying to remove a bunch of bulk. Everything's
just already established and it just keeps everything a lot cleaner. Not even that,
but visually it just helps me see exactly where I'm going to place my fade and I'm not fighting
with hair getting in the way. And I'm also not removing anything that I might need to keep for
the top or the back. So what I'm going to do here is create a section, kind of like a V section,
starting from the cowlick and bringing that down to where his hair naturally begins to part.
Not directly in the middle, more slightly towards the sides. And I'm not going into the corners of,
you know, or the recession. The reason for that is because later I'm going to show you guys how
I like to isolate that corner here so I don't accidentally cut into the bangs. But once I have
that section established, I'm going to go ahead and separate the back from the sides and the top.
Now, just looking at the back visually, it's really long, really heavy. And I want something
that's a bit more even and actually fits the shape of the back because right now the length
at the bottom doesn't really blend into the top and it kind of pops out too much from that
mid to upper section. So what I'm thinking here is creating more of a squared shape.
And what that's going to do is allow me to keep enough length in the crown so it doesn't look
super long and heavy, but also not so short to where the crown is just short, you know,
and it throws off the whole head shape because I do want that crown to still look full. As I
work my way down, I am going to slightly blend, you know, into that bottom length because I do
want to keep some of that length to line up the back later on since that's what you preferred.
So realistically, I'll probably end up going with something that leans a little more triangular
by the end, meaning a bit longer towards the top, the crown area, and slightly shorter as we go down
into the neck or nape area. And like I've said before, guys, what's really going to level up
your shear work is understanding your comb and how you're holding it, how you're holding your
shears, getting comfortable in that safety position over and over. And even how you grab
your sections and position your body plays a big role in this. So when we're creating, you know,
the shape here in the back, you know, we are just going to do the same thing I usually always do in
some of my other videos is I just created a profile section right through the middle.
I create that shape, you know, with a desired length. And I am going to move round in this case
because I don't want too much hair in the back. I want something nice and soft, you know, something
that's going to fit the client's head shape. But the way you pull the hair out is what's going to
create the shape. So if I'm going for something squared, my comb is coming out more squared,
right? My fingers are creating that straight vertical line and I'm building the sides of
a square. You're not really creating the full shape at once. You're building one side of it
at a time, if that makes sense. The same goes for a triangle or a circle. Now, one thing I am going
to do is as I do get behind the ear is I'm going to tighten things up a bit more in that area
because that's where I'm going to be placing part of my fade as well. So as I approach that section,
my fingers are actually going to get closer to the scalp, making it shorter. But I am still
flaring out as I do move up. And you can see that transition happening as my fingers gradually come
in, you know, tighter towards the back of the ear. And what that will create, obviously, is something
definitely more triangular, again, because it's going short to long. Now, this is the part I was
talking about earlier where I want to make sure I don't take too much off the bangs and accidentally
expose the forehead, which I see a lot of beginners do. What you're going to do is from where the ear
is, go straight up vertically until you meet that top section we created. And from there, you're
just going to section into the corners and create like a small little triangle of hair. And you're
literally just going to comb that over into the hair that's already sectioned off. And what that
does is that protects the corner piece, which is super important for keeping the fringe looking full.
And it also, you know, just helps you isolate the sides better. So you have way more control over
what you're creating. So now moving on into the sides, I'm basically going to hit copy and paste.
I'm creating a vertical section that grabs some hair from the back and some new hair from the
sides that hasn't been cut yet. And I'm just following the same exact shape, same length,
same cutting line that I established in the back. Now, once I do that, I am going to go into what's
called forward graduation. So I'm combing everything forward because that's also the
direction I'm taking my sections in. And don't overthink it. I'm just grabbing that previously
cut guide from the back. You can see it, you know, sitting behind my fingers going into my palm.
And my fingers are pretty much just going to be on the scalp. The reason for that is because when
your fingers are on the scalp, that usually puts you around a number two or number three length.
And I already know I'm going to be going in there with my clippers anyway. So I'm kind of just
setting up that, you know, ahead of time. Now, as I start moving up, though, remember a fade goes
from short to long. So if I want to keep more link towards the top, especially if I'm trying
to create a slightly triangular look on the sides, you know, vertically, once I get to like
section three or four here on the sides, I'm actually over directing that hair down into
section, you know, like two. What I mean by over directing is I'm pulling the hair from the top
towards the bottom. And what that does is it keeps that top area longer so it doesn't throw
off the shape and gives me that nice and darker top part of the fade. And you can even see it,
you know, to just start create a little bit of a weight line after. But yeah, then we're just going
to repeat the same exact process on the other side. But before I do move on, I want to show
you guys another simple way that I could have approached the back just so you can see, you know,
a different perspective. Now, after finishing one side, I do want to show you guys another simple
way of approaching this just so you have a different, you know, option or perspective.
So if I grab the hair from the crown and I want to create something more square,
what I'm doing is pulling the hair out to where I would want that length to basically kind of sit
and when it comes to choosing length, that's something you're going to build over time.
You kind of just have to trust your eye and your intuition, but a simple way to help is just
pulling the hair out and visually seeing where it would fall once you cut it. So that's exactly what
I'm doing here. And again, if we're aiming for something a bit squared, but slightly triangular,
since we're going shorter towards the bottom, I'm going to work horizontally at the crown first,
and then I'll show you how easy it is to connect that crown area all the way down to the neck.
So all I'm doing is grabbing that longer hair from the crown and then combing it down to where
I want it to fall and just cutting it. And since I want a bit of a round, you know,
horizontal shape, I am moving in a horizontal motion here, which ends up creating a horizontal
weight line in the crown area, or in other words, around shape side to side. And when I mean
vertical, you know, we do create a triangular, slightly triangular, slightly squared up and down.
So then this basically becomes my point A, you know, and from there, all I have to do is create
a vertical section straight down the middle. And, you know, basically just connect the crown
length that I just cut right now towards my point B, which is the bottom of the neck and
these vertical sections. Again, I'm just working from the back here towards the area behind the
ear. So it's really just connecting top to bottom in a clean way. And it saves you a bit of time.
You could also approach this diagonally. And if you understand graduation,
it would pretty much be the same concept, just making sure you're over directing where you need
to, which in this case would mainly be in the crown area. But at the end of the day, it gives
you the same result, just a slightly quicker way to get there and a good way to start understanding
different approaches. Now, moving on to the other side, since I showed you a different way to
approach the back, I also want to show you a different way to approach the sides because
there's really no one right way to do this, right guys. So if you're thinking like, can I just go
in with the clippers after doing the back? You definitely can. Keeping in mind that we're trying
to create something triangular right after I section off that, you know, a little triangle
piece in the corner to protect the bangs. I can literally just go straight into clipper over comb
and start building that shape. While I'm doing that, I'm grabbing some of that reference from
the back and just cutting enough hair, you know, to guide me into where I want my fade to sit.
And all I'm really doing is keeping it shorter behind the ear, shorter in the temple and leaving
it, you know, longer as I move up towards the top, that weight line up top on the sides is
also going to help show me the shape of the fade that I want. And in this case, it's going to be
slightly, you know, like a rainbow kind of dropping towards the back since we're going for a burst
fade. This method can save you a lot of time too. And once you've built that, you know, that shape,
you can bring that triangular section back down, connect it, you know, towards the length that you
have on the sides, you know, to keep more link towards the front. So you can hide the corners
and keep that fringe full. And at that point, you're pretty much set and ready to move on to
the top. So now moving on to the top, all I'm basically going to do is from the cowlick go
straight down the middle to where his hair naturally splits. And I'm going to create a
section right there. You guys will see it's not always perfectly straight. Sometimes it will curve
a bit and that's totally fine. Just follow the natural parting from there. I'm going to comb all
the hair from the top down towards the sides and connecting it into the sides, but especially
towards the front, pay attention to how I'm going to be pulling the hair down. And again, you know,
over-directing it down, keeping more length because he did want his banks to sit just,
you know, a little bit above his eyebrows. So I'm keeping that in mind the whole time and doing that
on both sides. As I move more towards the back and the sides, I'm not really over-directing as much
and, you know, kind of just pulling the hair straight out a little bit, you know, towards my
chest, upper stomach. And again, the front pulling it more towards, you know, my legs. Now, once that
was done, I go ahead and create a profile section right down the middle. And since I want to keep
more length in the front and, you know, give it that heavier, fuller look. When I start from the
front, I'm not pulling the hair straight out and following the head shape. I'm actually pulling it
straight up and using that longest point in the front as my reference. So I don't take off too
much. Now from there, I'm basically just creating a square shape on top and connecting it into the
length in the back, being careful not to cut into that back shape that I already established. So
I'm always aware of where I separated the top from the back, even pulling some of that hair back,
just to make sure I'm not touching it. After that, my phone did die guys, but all I did was go in
with horizontal sections from the back to the front. This, you know, pulling the hair the same
way I pulled it going vertically, I am pulling it horizontally and just pretty much connecting,
you know, the sides into the guy that I cut in the middle. And that pretty much just wrapped up
all the sheer work. Now, once I was done with the sheer work, I threw in some sea salt spray and a
little bit of clay, you know, and blow dried it using a diffuser just to bring the shape to life.
After blow drying it, guys, you can really see, you know, everything just come together. The back
looks, you know, way less heavy, blends nicely into the bottom, you know, the neck area, crown
still looks full, and the banks sit nice, you know, right above the eyebrows. And now from here,
we can move into the fading part. Alright, now going into the fading, I'm starting off with the
number three guard to set my foundation on the sides. And since we already created the shape
with the sheer work, I'm really just following the same exact C shape or rainbow shape, just
clearing out the bulk and scooping into that weight line without really touching the length I
already established. So as I move up, I'm keeping that scooping motion consistent. And once that
foundation is set, I go in with the 1.5 guard with the lever closed. And I'm going to take that up to
where I want that top dark area of my fade to begin. And again, every guard I'm using, I'm
following that, you know, exact same shape, nothing changes there. Now to soften that line and start
blending it into the number three area, I open the lever and with my blade slightly angled out,
I'm kind of gliding over that line to connect it smoothly. And that blade angle is huge when it
comes to, you know, becoming more efficient with fading. It's what eventually helps you skip guards
and get better at free handing. After that, I go in with my thinning shears and start softening
everything up and just connecting that top section and really locking in that dark zone or
dark area. And I like working from the top to the bottom because it gives me a safety net. You know,
once that top is established, I know not to go above that point and I can control the darkness
a lot better just working underneath it. Now from there, I'm going to move into the light area or the
light zone of my fade. So I'm going to grab my 0.5 guard and go up about halfway of what I did
with the 1.5, creating my next guideline into that blending area, which is basically the space
between, you know, in this case, the 0.5 and the 1.5. Now to blend that out, I just simply open
the lever on the 0.5 and start connecting the two. And if it's not blending right away, I'll
slightly close the lever little by little or I'll adjust my angle and pressure until it does. Now,
after that, you know, I did finish off the bottom area by going in with no guard with the lever
closed and just blending everything up into that 0.5 area, you know, cleaning up that bottom line
and just bringing the whole fade together. Now, after this, I did just go back in with
my thinning shears and did a lot of detailing, just refining everything and making it look
smoother. You know, I've explained this a lot in my other videos. All I simply do is look for any
dark tones between lighter tones and basically get rid of them for a more even and balanced
contrast, right? Because the whole point of the fade is for it to go from light to dark, you know,
throughout that whole C shape. And I do want to say, guys, if you guys are not using the thinning
shears yet in 2026, you are missing out. Do you have to use them? No. Do I recommend them? Yes.
Now, after this, I went ahead and cleaned up his C cups, creating a nice curved
C shape. And notice how I kind of lined it up with the, you know, where his bangs are sitting.
That's something you want to keep in mind when you're just putting these haircuts together,
so everything flows. Not saying you have to just kind of preference. But yeah, after that,
I moved into, you know, lining up the back. And one thing I like to do is pull the hair up first
to see where the natural growth pattern is and then use that as my reference when the hair is
down so I'm not pushing the lineup, you know, too high. So I usually go in with my clipper first
just to remove most of the bulk. And then I follow up with the trimmers to really clean and refine
everything. And while I'm doing this, I'm also just paying attention to the direction of the line,
referencing the ears and just stepping back and looking at it from the back to make sure
everything's symmetrical. You know, just making sure both sides of the fade are coming back the
same and flowing evenly into the back. Now, after doing a bit of detail work with the blade,
you know, cleaning up his forehead and vertical bars, I then went in with the shaver to bald out
everything underneath, you know, cleaning the neck area and everything underneath the fade,
but not bringing that bald line up too high so I can keep a nice soft finish. And now getting into
the detailing and what I'm really looking at here is just making sure those darker tones are even
and consistent. So if I see darker areas sitting next to lighter areas, or if one part of the fade
looks more compressed and another looks more spread out, I'm just fixing that with my thinning
shears, you know, uh, just opening it up more or softening it down depending on what it needs.
And that's all I'm really focusing on here. And I'll even look through my phone because your eyes
can only catch so much, but I usually just spend another 10 to 15 minutes just detailing everything
until it looks right. But after the detailing guys, that's pretty much the whole haircut.
He honestly loved it and was super thankful and grateful for the cut.
It was probably one of my favorite ones I've done in a while. But yeah, guys, if you found this
tutorial helpful, make sure to like and subscribe. And if you have any questions, literally any
question, drop it down below. I always get back to you guys, even if it takes me a couple days,
I'll answer no matter what. But other than that, guys, I hope you guys have an amazing day,
amazing week, amazing, whatever. I'll see you guys on the next video. Peace.
