Gearbox Tunes - Mapping, Is It Worth Doing? [Automatic Transmission Shift Point Tuning Benefits]

Tuning Pro
54 followers
4 Video Views·Apr 26, 2026
So we've done lots of videos on remapping the engine and we've seen the terrific benefits you
can get just by changing the parameters inside the computer in the engine. People have been
asking about gearboxes and gearbox remapping. So a lot of people don't really realize that the
modern gearbox is computer controlled. You as a driver if you have a stick shift or manual car
you are making lots of decisions every time you change gear. The point at which you change gear
depending on whether you want to accelerate quickly or you're driving as economically as
possible. If you're a more advanced driver you'll be looking to match the revs so the engine speed
and transmission speed are the same when the gear engages. So on upshifts you will want to
decrease the rpm slightly and on downshifts you would want to blip the throttle and just
raise the rpm slightly just to enable that smooth gear change. So with an electronic managed gearbox
it's doing most of those decisions for you. So you've got to bear in mind that the modern gearbox
is a very complex animal. It's continually learning from the way you drive from the way
your engine is performing. So a lot of people who've had the gearbox reset maybe they've had
work done on the car and everything's been switched off and reset to the factory standard.
It will take a little while to pick up the shift patterns that are most optimal for your car.
So a lot of people have noted that shifts can be quite clunky, quite slow, unresponsive or
it might do unexpected things. So just give it a little bit of time to settle. Now when it comes
to remapping the gearbox you're actually looking to optimize all of those shift points. So the more
modern your gearbox is, the more work it is doing, the more sensor information it's got to work from,
the more complex it's programmed. A lot of cars now come with not just a kick down sport mode
but they come with a whole variety of settings and eco mode. Some even have launch control that
maximizes your launch for those drag strips and drag races that you might want to be doing. So
the gearbox itself will generally wait a little bit for the clutch system inside the gearbox to
engage and for the engine rpms to match whatever the transmission speed is. You can speed up that
delay and you can experience much quicker gear shift. In a modern gearbox where you've got
paddle shift you can dramatically improve the response of those paddle shifters just by
optimizing the ecu settings so the gearbox can respond a little more quickly. So also in a lot
of cases you might want to change the shift point. So for more sporty driving you might want it to
hang on to the lower gears a little bit longer and just push it a little bit harder. You might
want to disable some of the protection that's built into your modern gearbox. Even in manual
mode it's changing up when it feels it needs to so you can maybe cause it to become a little less
paranoid and enjoy the benefits of those lower gears and faster acceleration. So the ecu is
taking into account the speed of the vehicle, the load, the throttle position, the previous speed,
load, throttle position, how fast you've pressed the throttle, how much throttle movement has
happened since it last looked and last checked and it will actually try and anticipate your needs
so it can be there changing gear pretty much at the point you decide you need it and it's
just picked up on all these different sensors that have come back to give it the information
it needs to make the proper calculations. So getting your gearbox remapped will give you
lots of different benefits. These would include smoother gear shifts, improved acceleration,
shorter responses to gear changes whether it's through the gear stick selector or through a
paddle shift arrangement. It can reduce power loss in the transmission just by changing up
the shift points and making sure that the transmission engages as quickly as it possibly
can and you can change the points at which it will shift in the rpm range and it can also factor in
the driving conditions. Are you accelerating hard? Are you wanting maximum performance? Are you just
driving for economy? So is it worth doing? Well most people will look at the 0-60 time and how
much that improves when you've had the gearbox remapped but in my book that's rather crude,
that's not giving you the whole picture. It's certainly a benchmark but most cars will do 0-60
in just one or two gears so you're not actually building up a very good picture on how effective
the gear changes are. You will experience an improvement in your day-to-day drive when you
go to overtake something, when you hit a hill for example and you just need to drop down a gear.
All of those things make the car much more enjoyable to drive, a much more pleasant driving
experience but it won't dramatically reduce the 0-60 time so with a lot of enhancements that
you do to your car you're not going after big power figures, top speeds, super acceleration.
You're improving its flexibility in day-to-day situations and that will go a long way to improve
your driver enjoyment. So would I recommend you just go out and remap a gearbox on its own?
Well there certainly are merits for doing that but why not also optimize the ECU itself and just
make sure your engine is putting out as much power as possible so you've got the complete
package because I bet that if you had the gearbox mapped and you like the improved throttle response
and the improvements you see you'll then be going back and getting an engine remap done at the same
time. It's funny we think we're driving our cars but now so much is electronically controlled and
governed. You used to move your accelerator pedal which would directly control the throttle on the
engine and dump more air and fuel into it but nowadays with drive-by-wire systems you press
the throttle and a signal goes to the ECU and then it interprets that signal and it does lots
of stuff to make the car go. So generally manufacturers set things to be very conservative,
very safe, they don't want people experiencing lots of wheel spin, they certainly don't appreciate
that drivers are going to be wanting track-like performance from their engines.
One of my big annoyances with modern cars is the left foot braking. As soon as you touch the brake
pedal now the accelerator input is cut so you lose all of the advantage of left foot braking
in cornering. So with clever ECU adjustments and ECU management, gearbox mapping, ECU mapping,
you can eliminate a lot of these protections that manufacturers have built into the engine
to protect the car from idiot drivers. And we'll just assume that you're a professional driver who
knows what they're doing and you don't need all of these safety systems and you deliberately want
to exploit the handling characteristics of a car that will be somewhat more wild than maybe what
you're used to. So I hope this video has cleared up some of the misconceptions and myths around
gearbox remapping. It's helped you to have a realistic expectation of what to get, what the
benefits are from remapping your gearbox. And if you haven't subscribed, please do so because we
would love you to stay tuned and I'll see you in the next video. Thanks for watching.
