How to Customize a Neckline Decorative Details Welt.

Lina Rose Knits
7 followers
2 Video Views·Apr 26, 2026
Here's my funny little neckline swatch. It's just to show you necklines, but
this is a welt.
So
another option for
before you start into
the ribbing on a neckline, you can pick up and do a welt. This is a three row welt.
When I show you how to do this, I'll show you a two row welt.
But that's what a three, what three rows of welt look like.
It's quite dramatic.
But if you want to really draw attention to the neckline, that is an option. I'll show you how to do that.
So to knit the welted neckline,
to do any of these, you first have to pick up your stitches and knit one clean
round.
Right? And after you have
knit that initial round
for a welted neckline, what you're going to do, and I'm using magic loop because I have such a tiny little
neckline here.
What you're going to do in this next round is you're going to knit front and back into every stitch.
So knit front.
So you're going to double your stitch count.
Into the front and the back
of every stitch
all the way around.
All right, so here I am. I've gone all the way around. I'm back to my beginning of round marker.
And I have knit into the front and back of every single stitch.
And now what we're going to do
is you are going to knit
and then slip the next stitch purlwise with yarn in front.
Put the yarn to the front
and slip. Yarn to back,
knit.
Front and slip. To the back and knit. And you're going to go all the way around this way.
You're actually going to do two rounds
like this.
And you can stop there or you can actually do a third round.
Knit the knits.
Slip the purls.
If I do this
for one full round, I'll get to
the second round and decide.
That's when you can decide if you want to do a third round
as in the sample that I showed you. If you want to just stop
after two rounds, it'll be a smaller welt.
All right, so I am at the
end of my second round of doing the welt. And you can look at that and decide if you think that is enough
of a decoration for you or if you want to go around a third time
and do one more round of the welt stitch.
If you want to go around another a third round, that's fine.
The main thing about this is if you quit after two what you have to do is begin to
work these stitches together
with the last stitch of the round.
So for instance, I am coming up on I've just done a knit one. This should be a slip one.
But if I decide that I want to
start to
decrease these stitches back down and start my actual
rib stitch.
That marker so that I can
show you this.
It begins with that last what would be a slip stitch.
Slipping the purl.
You're going to knit that together with the first stitch of the round.
And you're going to repeat that all the way around every single
or every two stitches. You're going to knit two together, but you want to make sure that you're going through the knit stitch
first and that puts that little funny
purl slip stitch to the back.
You do a few of these this way and then you look at your welt and
decide if you think that that is enough
definition.
I think that's enough.
It's smaller than the one in the sample
I showed you but if this is enough, we're just going to go around and decrease the stitches back down to
our original
stitch count.
Again, you can decide
how dramatic you want your welt.
There is two row welt
and I have knitted two together all the way around.
And now I'll begin my
stitch
pattern. If it's knit two, purl two or knit one, purl one. I'm just going to go with knit one.
So there we have
a two row welt
design before we start in on
the ribbing.
And I could just as easily have done two by two rib.
You know knit two, purl two.
But it's a fun option
if you want something that is a little bit different than just launching straight into
your rib.
And there is another version of this welt
that I will also show you and
the
point of working this version is that it's easier to
work the inside of it in a secondary color.
So if you had a jacket or a
cardigan that you were going to maybe wear open where
the inside
of your pickup was going to show,
this might be an option. So I will show you how to do this option as well.
Right, so to pick or to
work the
version
of the welt that where you pick up stitches
on the back rather than knit front and back in each of those.
What you do is the easiest way and the way that allows you to knit the back of the welt in a different color
is to as usual pick up and knit the first round and then knit another
round. You can even knit two rounds if you want that three round welt, you know the really
pronounced welt.
So you're going to just knit all the stitches all the way around
for either two or three
rounds.
All right, so I have knit around
three for a total of three rows.
And now we are going to go and pick up on the inside.
So that's the difference instead of doing knit one front and back all the way around.
We're actually going to go and pick up a stitch for each of the stitches that we already picked up but on the inside.
So
you can try and sort of go down to the base of each of these.
A lot of times, let's see, when you go along the side edge here, right where I picked up along the side edge,
you should have a nice little,
you know the same as you had picking up
this nice little,
maybe a little funny looking across the back. Doesn't help that across the back I had a row
of reverse stockinette
and my funny little swatch.
If you're doing a normal sweater, you probably won't have that.
But as best you can go right down to the base of each of these and pick up a stitch
for each of the stitches that you have on your needle so that you have the same stitch count.
All right, so just
pick them all up with a skinny little needle
and then we're going to knit
off of them with the same size needle as you're working
your
front stitches with. I'm on a US 3 knitting those front stitches, so I'm gonna have to go and find another US 3.
You could probably go down a needle size.
I can even find a two that's close enough. So the main thing is is as you go and pick these up on the back side,
just get a count on them and make sure that you have the same
amount of stitches
picked up as you have on your needle.
All right, so just keep picking them up
all along the inside.
So I went around here
looking at the wrong side
and the inside
and I picked up a stitch for every stitch that I've got on my needle. Double check that I've got the
same stitch count
and now you're going to be knitting this backwards. So
you know when you knit a neckline
ribbing you start at what would be the left back front shoulder joint and knit
down across the
left and across the front first.
We are looking at the inside and we are going to knit across
the back neck first
on the inside.
And I'm just going to stay on my super skinny
needles
for this. Again, I'm using magic loop
so and I'm going to use a different color
and
if they seem to be oriented backwards on the needle, I just knit them through
the back loop.
Knit fairly loosely since I'm on a skinnier needle than I really should
just to show this.
So you're going to knit each of those stitches all the way around
and then you're going to do as many rows as you have done
for the front of this welt. So I did a total of three rounds
so I'm going to knit around
three times.
So there's my first round knitted
I'm going to keep going knitting backwards and on the wrong side.
Another
two rounds.
All right, so I've got my three rows on the inside three rows on the outside
and now I'm going to return to my front needle and my front yarn
and get those two
needles parallel.
We're going to be working with the front needle again and your main color yarn
and you're just going to knit
stitches together all the way across. So knit one from the front
needle and the back needle
knit those two together
and you're just going to do that all the way
around
and then we'll be back to
the original number of stitches
and
that's when you will have one knit
this one knit row and then you will go to
your ribbing.
And it is definitely easier to work the one where you knit front and back
into the stitches because you're just on one set of needles, but this one is fun
if you want to add that little bit of color.
All right, so once we have knitted together the stitches on the front and the back needle all the way around
and get this little
welt in the inside, like I say you can do that in a different color and now I will go into
knit one purl one rib again. You could do knit two purl two if you wanted to as well.
So here's what
this version of the welt looks like from the outside and then there's your little secret
inside if you want to do it
with a separate color. You can also do it with the same
color and sort of one of the points of this is to
sort of make a little
inside cover of the pickup and some people crochet around
the neckline before
they do the pickup on both the right side and the wrong side. I kind of find that to be
an extra step that I don't really think is necessary. Again, this is very tiny,
a little tiny swatch, but I think you can see what it looks like.
And if you do this on a cardigan
or jacket where
you're going to have
where this opened up and maybe the collar the inside of the collar is going to show,
it's a nice detail for that.
This is how to work it.
