Making a Material List for Wall Mount TV Project

VideoJoeShows
86 followers
3 Video Views·Apr 22, 2026
https://www.youtube.com/user/VideoJoeShows
VideoJoe is making a quick list of electrical materials he needs to pick up at the store for his tv wall mount project. He will be discussing a few other things too so this howto video could help you with your upcoming electrical project as well. Watch & learn as VideoJoeShows you what he will be doing prior to picking up his electrical materials for installing a wall mounted tv..
https://www.youtube.com/user/VideoJoeShows
I'm gonna check this plug. This is the plug in the cable for the TV
and here I've got a little drop light here and I've got that plugged into there.
I found the associated breaker.
I'm pretty sure I'm gonna turn it off and see if this goes off.
I never want you to ever work on a hot plug. I'm going to pull that plug out of the wall.
I guess that was the right circuit.
I only had to check one because I knew I had a pretty good idea that the one I was
turning
was this one. So if you read the panel like I was showing you
it might take you two or three turns on different breakers but you should get it
pretty easily. That way you don't have to
turn on and off all 20 of your breakers or however many you got.
So now I'm gonna go ahead and pull that plug out.
I'm just gonna double check it to make sure I get the right size wire.
Now here's a mistake that some people do.
Here's that same plug here. Before I pull it out
some people will look at this and say oh I know what
circuit that's on. It's on a 15 amp breaker because nobody would ever
install a 15 amp plug on a 20 amp circuit
and that's what's happened here. Lots of electricians do this. Lots of inspectors
let that go and I'm not quite sure why.
But this is a 15 amp breaker
receptacle and the reason why I know that
the 20 amp receptacles
usually have a little line coming across this way
and it's a little notch that comes across here and one there.
When you see a plug like that you know that
is definitely on a 20 amp circuit.
Now see this one doesn't have that does it?
There's no notch right here. It would be a
little notch coming across just like that coming out there
and one there.
If you ever see a plug like this don't make the assumption
that is 14 gauge wire running to that
on a 15 amp circuit because sadly that might not be the case.
So I know that I'm gonna need 12 gauge
wire for my job. So I'm gonna take a wire
ultimately I'm gonna have a wire from there and I'm gonna go up
behind where I'm gonna put the TV and put a cut-in box in there. So I need a cut-in box
there
I need some wire. I need some wire nuts.
More than likely I'm gonna
take this plug and
outlet box out of the wall and put a cut-in box there too because it might be kind of
hard to fish a wire
from this box straight up without taking this box out.
You know what I might even try to do it but
it's kinda tricky to do that but I always like to be prepared so I get an
extra cut-in box for that
and this box here
I'll probably be able to save. I don't know if I have to pull that out of the wall
or not. In fact I'll probably unscrew that too.
I know I'm gonna need a cut-in box for that up high too
and I may need another one down here so
you know what I think I better just take this apart just to see what kind of box
it is.
Here's something else I decided to
lots of times when you raise this plug you could take this plug out
and raise it up, put a blank plate here and use this as a junction box. Just tie
your new wires into there. Then you don't have a plug here but I don't want to do
that because they're gonna have
a dresser, a set of drawers right here
below the TV so I want to keep this plug down here too
that way in case they want to plug you know
first off your DVD player you want to plug that in there and if you have a
lamp on top of your dresser you want something there
too so I know I'm gonna have to get another one of these plugs
just like this one for up high where
behind the TV so this one is rectangular
you gotta look at that because what I like to do is match everything
existing conditions. I don't want to get a cheap old plug
that's got the two duplex plugs
individual you know what I mean? It looks a little bit different than this so
I'm liking that and this cover is a vinyl cover
it's not an ivory plastic cover it's a vinyl one
and it pushes in kind of. I can tell the difference so I'm gonna get one of those
two and this is white it's not an
off-white sometimes they have off-white plugs so
that's all that kinda stuff that you kinda need to keep in mind
so when you get done doesn't even look like you're there
