How to Line up TV Wall Bracket on Wall Stud

VideoJoeShows
86 followers
15 Video Views·Apr 22, 2026
https://www.youtube.com/user/VideoJoeShows
Now it's time to locate the existing wall studs to figure out where they are in order for you to decide which wall stud to bolt to & to still make it that your tv is located pretty close to where you initially had wanted it on the wall. Sounds like a lot of hub bub but if you were to pay someone to come in & install your tv, they would have to go through the same process so why not just pay yourself.. Watch & learn as VideoJoeShows you what he does next in order to locate the tv where he wants it on the wall then how he goes about locating the wall studs to see where he will need to place the actual tv wall mount.
https://www.youtube.com/user/VideoJoeShows
So like I say, spend some time on this, read your directions, make sure your bracket assembly is
going up right and that you understand everything how it works before figuring out what to do next.
Because see, once this bracket is on here, I get it hooked on and I figure out which way it goes
and lift it up and all that. I know that's right and that's the bottom.
Remember I wanted five feet two inches to the bottom edge of the TV. So I know this is the
bottom. I know this is up tight. So I've got to measure five feet two inches from this edge. Then
I have to measure up to the bottom of this bracket that's going to be bolted to the
wall. So the easiest way to do it is just hold your tape out. I've got five feet two inches
right to this edge where this the bottom edge is and then I can look up here to the edge of the
bottom of this bracket assembly. Okay, I got 69 and three-eighths. So I know this is where the
bottom of the bracket has to be bolted up to the wall, right? Then that will allow this room here.
I couldn't just bolt that at five foot two and say, okay, that's fine. Put the TV up there. Uh-oh,
you forgot about that. Uh-oh, you measured from the top down and you thought that was the bottom
of the TV. So you measured five feet two inches from here to there and now you're wrong. So see,
that's why you just spend a little bit of time. Get your bearings. Understand your project before
you start bolting anything up to the wall and making holes because you want to do this right
the first time. Okay, so things along the way, you've got to remember these measurements. Write
them down. You know 69 and three-eighths to the bottom of there and we got to figure out
where the center was. We marked over three and three quarters and so this is the same type of
processes you're going to have to go through for your TV. Don't remember my exact measurements
because your TV is going to be different, but follow the steps and you'll do it.
So ideally what we got was three and three quarters over from there. Remember? Okay,
so I'm just going to hold my pin up here. This is not exact. It's going to be close enough for right
now. Ideally, that's where I'd like to put my bracket up on the wall, but now there might not
be a stud exactly there. Okay, so now I've got to figure out where the studs are and here's the
other thing. You see where that is going to go and here's a plug here and here's the cable for the
TV. Now I know that there's probably a stud either right there beside this box or right there beside
the box. The same thing over here is probably going to be right there or right there because
the studs are probably 16 inches on center. The box is usually nailed to the edge of a stud either
here or over there. So if I just hold my tape there, it's about there. I can see that that's
going to be about where a stud could be or it's going to be there and there. That's not always
gospel because they might have laid out the wall differently. It might be two foot on center.
They might have had to add another stud in the wall for something. This could be a cut-in box
for all you know and it might not even be next to a stud. So those are the types of things we need
to look at. If I have to go over to the edge of that plug, that's okay. That's still pretty close
to center of the wall. You know what I mean? So what's our next step?
We need to find out where the stud is, don't we?
