https://www.youtube.com/user/VideoJoeShows How to properly secure & attach a TV to a single arm mounting wall bracket is easy...when you know how. Here's a tip for you. Read the directions before attempting to attach the tv to the actual single arm bracket assembly like VideoJoe didn't! But he got the tv up there ok but had he read the directions, they would've shown him an easier way to secure the mounting bracket from moving while he attached the tv. Then your question may be "how do you keep the tv from falling off the single arm swivel mounting bracket assembly". That's easy too, if you just read the directions. VideoJoe read the directions on that & he'll show you how to do it. Watch & learn as VideoJoeShows you how to properly secure the tv to the single arm mounting bracket assembly. https://www.youtube.com/user/VideoJoeShows
I wanted to point out one thing to you. Now see I didn't read the directions on this whole thing.
I probably should have. Bad Joe. I want to show you anyways. Remember I had that styrofoam piece
held in here so I could put this on. Well if you run this sideways there's a screw up there and
you can take the little allen wrench that comes with it. You can tighten that up. You can have
this rod from here out come out straight and you can tighten that one down. Now that will hold up
against the wall far enough to allow you to be able to put this TV on that bracket. You know what
I mean? Because they do say you should have help with this but I'm doing this by myself and I want
to show you how you can do it too. So that's another way you can do it and I probably should
read the full directions. You know I thought okay I can put that up there but see just that one step
would have been very helpful. So I wanted to point that out. Now you may say what keeps this up there?
If somebody bumps this how do I know it's not going to fall off? Well on most units there's a
there's a set screw or there's some sort of bolt that attaches onto this. On this one there's a
screw right up in here. It's a little set screw that I put up there and tightened up with an
allen wrench and that's on this bracket that kind of goes into the base. That way it's assured that
this can't be lifted up. The TV can't be lifted up and fall off of this bracket because you don't
want somebody hitting this and and all of a sudden lifting up and the TV's coming down. So look at
your directions and you should be able to figure that out one way or another. It'll be on the directions.