How to Demo Kitchen Tile Countertops Made Easy? Part 25

VideoJoeShows
86 followers
26 Video Views·Apr 23, 2026
How to demo kitchen tile countertops made easy Part 25 is what this DIY howto video is about. VideoJoe is right in the middle of removing & demoing some tile countertops in a kitchen in a Condo & now he's ready to tackle removing the heavy cast iron double sink. He first needs to disconnect the water lines & the existing garbage disposer so he can then figure out how to lift the cast iron sink out of the opening so it doesn't fall back into the same opening. I think it's going to be slightly tricky since VideoJoe is working alone but I think he can do it! Watch & learn as VideoJoeShows you what VideoJoeKnows...how to demo kitchen tile countertops made easy Part 25. Nice!
Well can you believe it's already day three of our project and I did it in stages I did it in phases
I did this section first to see how well it was going to go before I transferred over to here
the second day I did all of this over here that was my goal that was a pain in the rear let me
tell you and now today it's all about taking out this cast iron sink and see I just I just
tore everything out around the sink I could have taken the sink out the very first thing but then
I would have had a hole here and all the debris and dust and everything would have transferred
down underneath inside my cabinet okay as it is either way you know now I have to get in underneath
the the kitchen sink the cabinet so I can pull this craft paper away because I'm not going to
need that anymore am I and in fact I'll just pull the craft paper back I'll just fold it over kind
of tape it over there pull this out get everything disconnected and that kind of thing and then when
I'm ready to start prying on this I'll just probably put the craft paper back just to protect it from
when I'm taking the rest of this stuff out okay so that's my that's my project today and um if I
get you know more than likely I'm going to have that done in a while and then it's about taking
this plywood off I've got to look at this and see how how I'm going to take that plywood off how if
it's nailed with uh nails or screws in fact I see I see a few well there's that's a that's a nail
but see right here that's a screw there and I saw there's a couple screws in the back and I noticed
there's a few there's a few screws back in here but I think the rest of it's nailed and I'm going
to check that out but you know I also need to fix this wall these walls here where I took the uh
the backsplash material off okay and I'm thinking I might want to kind of work on that before I pull
the plywood out you know what I mean um that way I don't get I don't get any sheet rock mud or
whatever I use on here I don't get that spilling down there and this will kind of protect it so
you know lots lots of things to consider but my first step is to remove this sink
okay I got my craft paper pulled back I had to sweep this whole thing out because uh just by
loosening up the edges lots of stuff got in there so I swept it out got it all down in there
and it looks like I'm just about ready to go but the first thing do you know what the first thing
I'm going to do before I do anything underneath there yes I'm going to undo this this cabinet
door over here this is as far as it goes and if I if I were to hit that by accident
if I'm under there crawling around squeaking around squiggling around
trying to position myself to get all that stuff disconnected I could if I if I just put a little
pressure on here I'm going to spring the hinge and and I could pull uh some of the screws out
of the particle board oh no this is hardwood so that's good that's hardwood too so that's good
but it would bend it would bend that and it wouldn't be a very good sight okay in this
particular one not all concealed hinges are created equal okay um I've got to take off
these screws I just have to undo this screw here that screw there but before I do that
I want to look at that it looks like see there's a slot there looks like I'm at the top of the
slot so when I reinstall it I know where to put that that that's so that you can adjust your
cabinet doors you know like if you have a double door and if you want to raise it up a little bit
to line up next to another door you can now other concealed hinges are slightly different than this
but see this one here is pushed up against the cabinet okay so I don't have to do anything with
that one and when I get all done I'll put this back on then when the countertop guys come
I'm gonna I'm gonna take this door back off and I'm gonna store it out of their way
because they're once they install their top they come out and they've already have the top pre-cut
for the new sink but then they all have to get underneath because it's an undermount sink with
some brackets and stuff so they're gonna have to be underneath this cabinet and stuff I don't want
them springing this door okay so before they get here I'm gonna undo that and I just got a notice
from them today saying they would be here Monday between one and three today's Friday if you've
been following along I started putting the plastic up and and all the paper down on the floor and the
prep work plastic over here and craft paper on the cabinets the lower cabinet stuff I started that on
Tuesday Tuesday afternoon and then Wednesday I took this section out Thursday I took this section
out now today's Friday okay I'm gonna take that out figure out how to do some other stuff I always
give myself plenty of time because if something unexpectedly comes up I've got at least one or
two more days to figure things out I got the whole entire weekend if I have to if I have to do
something I know I can do it on uh over the weekend or even Monday morning finishing up
doing certain things knowing that they're not going to be here until at least one o'clock
right okay so I'm going to take this off and then I'll I'll shimmy down there underneath the sink
and tell you how I'm going to disconnect everything hey do you need to be a plumber to do this
absolutely not
