How to Bond MDF Baseboard to Concrete Block Wall

VideoJoeShows
86 followers
42 Video Views·Apr 19, 2026
https://www.youtube.com/user/VideoJoeShows
How to bond & secure MDF Baseboard to a concrete block wall is what this howto video is about. VideoJoe needs to install a piece of MDF baseboard to a concrete block wall. What is he going to attach it with? Will it hold? How is he going to hold it into place I wonder. Attaching MDF baseboard to concrete & concrete block walls is easy...when you know how. Watch & learn as VideoJoeShows you how to prep to make sure the MDF baseboard gets properly bonded & secured to a concrete block wall.
https://www.youtube.com/user/VideoJoeShows
Here's that long wall, and this is that block wall.
Concrete block wall that I floated out,
and that's another reason why I wanted to make sure
that this baseboard's long enough in one piece,
because I don't wanna piece this wall together
when I glue it up against the wall.
I gotta use liquid nails to install this
up against the wall, okay?
I have not tried it yet.
I'm curious if it's gonna fit in there
kind of like how I was hoping,
because I made it a little bit long,
and to get it in there, I just need the middle
kind of flexed out, okay, and I put both ends in.
If I'm gonna push it up there, what could happen?
If it doesn't flop up against the wall,
and it just sticks out too far,
then I'm gonna have to trim off a little bit of it.
Ooh, looks like I'm gonna have to trim.
Man, I thought that was gonna fit good.
Let's see here.
I'm gonna have to shave off a little bit.
Not right in the very corner.
Too long.
Yeah, just a hair too long.
Shoot.
It's almost.
I'm gonna just chop off about a sixteenth.
That way, it'll still be just a hair long for this wall,
and it'll fit right in there.
See that little bow there?
We gotta get rid of that.
I just didn't wanna cut this perfect the first time,
and then find out I was slightly short.
That happens sometimes.
Make sure you measure right.
Okay, let's see how it fits this time.
I'm gonna be careful so I don't bubble up the ends.
So when I plop it up, and slide this over,
and then I can kind of build up the middle
to get this other side of gentle,
because you don't wanna rub the wall.
You don't have to.
Make sure I got that pushed over.
And you know, if you're adjoining walls
aren't perfectly plumb,
that can affect your measurement too,
especially on a five and a half inch wall baseboard.
Okay, that's gonna go just fine.
Yep.
Didn't have to do much, did I?
Okay.
Now, because that's a concrete block wall,
you know, I can't nail it.
I'm not gonna screw it, or lag it in,
or anything like that.
I'm gonna use my good old liquid nails.
That's right.
That's how I'm gonna do it.
Very carefully, so I don't get caulking all over the place.
Do you remember this stuff?
This is your friend, liquid nails.
I use this for all kinds of stuff.
And this is the standard construction adhesive.
Liquid nails comes in two or three different kinds.
I always use just the standard stuff.
You know, they have some for plywood,
and some for certain types of materials to bond.
But I usually use this one here, the red label.
You know, whenever you use this stuff,
it's got a seal inside the hole.
Okay, so once you cut that, you've gotta break that seal.
Sometimes the caulking don't have that.
And if you forget about it,
and you start trying to squeeze this out of your container,
it's gonna come out of the end,
and spooge all over the place.
So, you know, my caulk gun has that little tip on there.
And I just use that, kinda gouge in there,
and make holes in there.
Make sure whatever you use is long enough to penetrate that.
And I do it four or five different times.
Yep, I got it.
Okay.
Don't forget that.
When I do this, I do it in circles.
Get circles on here.
And I wanna make sure I don't have any gap in there.
Because there's an indentation here,
just a little bit on the back side,
I have to make that kinda thicker.
Because if I have a circle like that,
once I bond that to the wall,
then this area in the middle of the circle,
as it's drying,
the gas in there is gonna be concentrated right in there,
and it's gonna suck that wood
right up against the wall.
If you never knew that, now you do.
Because that's the best way to do this.
And then I can put a couple little drops here and there.
You know, you read on the back side of a container,
and that's what it tells you.
That's why I say you gotta get the circle all the way in.
If you get a gap on there, I mean, it's okay,
it'll still work, but it's not gonna suck it up as well.
Because you're gonna have a line,
you're gonna let the gas out, okay?
So try that next time,
on the back side of your baseboard.
Paneling works like that too,
or, you know, pretty much anything.
Back of countertops, you know,
when you glue your countertops,
you got that rail on top of your cabinet.
Make it in circles, little smaller circles,
before you put your countertop on there,
you're good to go.
Here's something else to think about too.
I've got only one tube of caulking here.
This piece is pretty long,
and I'm not sure if I'm gonna have enough.
So, I don't, see that end right there?
I probably don't need any at the very ends,
because when I put that up against there,
see that little piece of baseboard
that's gonna go up on that left-hand wall?
That 45 degree cut in the corner
is gonna hold the end of that from coming out.
Same thing at this end.
I probably shouldn't have put any liquid nails
at the very end, you see what I mean?
Because that other piece to the right
is gonna hold in the base up against the concrete wall.
Okay, so I probably should have started this glue
from the middle and worked out both ways.
Hopefully I got enough, but I'll keep doing that
and see if I got enough now, okay?
That's how you can stretch your liquid nails
for your project, you don't have enough.
You know what?
I'm glad I did that, because I ran out down there,
and if I would have had enough,
if I would have had a little bit left,
you know, on the top edge,
this is the top of the base, bottom of the base,
I could have put a little drip right here,
not too close to the top, but like right there,
right there, right there, right there.
You know, something like that.
I don't really need to do that at this point.
I've got enough caulking on here,
and once that dries, my top edge
is not gonna be perfectly tight up against the wall anyways,
but once that liquid nail bonds to the wall,
whatever it is, it is, and then I'll caulk the top of that.
Okay?
Let's put this up against the wall.
