Creating a MASSIVE Poison Frog Vivarium

Mini World Craft
6 followers
22 Video Views·Apr 19, 2026
In today's video, we're going to be taking this empty 110 gallon custom made by me vivarium
and turning it into a tropical paradise for one of the true gems of the rainforest,
a pair of poison frogs, otherwise known as Ufaga histrionica fuego.
They're currently the only ones in the country right now.
I know you're here to learn how to build a wicked setup for your reptiles or amphibians.
Fingers crossed they are for dart frogs, though.
Sorry, sir. What was that?
Anyways, in today's video, we're going to be building a beautiful background for
these incredible frogs that I've already mentioned, and we are using a new method.
This is the cork bark panel method.
It has been done before.
I'm sure it'll be done again.
More on the details behind that later in this video.
Make sure you stick around and see how it turns out.
Let's get to all the materials that you'll need to gather before starting a project like this.
First, obviously, you're going to need a tank.
Whether it's custom or not, it really doesn't matter.
It's totally up to you.
But if you are in the Toronto area and you're looking for a custom tank,
my email is in the description.
Hit me up.
I also do backgrounds as well, but that's another story.
In terms of the main building supplies, you'll need cork panels, a screwdriver,
or a drill with a wire brush bit, filter foam pads, manzanita, and some silicone.
Don't worry.
There's a few more things that you'll need, but I'll leave links to everything
in the description down below, as well as a complete list.
So you make sure you have everything there.
Now, whomever has made it this far into listening me list off items to build a tank,
please consider leaving a like on the video and subscribing to my channel.
It certainly helps me out.
And I'm almost at 100k subs.
Let's try and hit it before the new year.
Come on.
I believe.
Now that you've collected all your items, the first step is making sure the glass is clean
of any debris or oils that might have been left behind while moving the tank,
or in my case, building the tank.
To do this, I use an isopropyl alcohol spray,
and then follow it up with a light misting of a vinegar solution, and then wipe it all down.
Now that you have a clean work surface,
it's time to get measuring the exact dimensions of the interior of your tank
and planning out where you want to put your cork panels.
While I'm doing that, I did want to say a huge thank you to a bunch of tanks on Instagram.
Sharif has helped me through this entire build through the live streams and over Instagram.
Incredible dude.
Make sure you go talk to him and follow.
Now that we have the interior dimensions and figured out where we want all these cork panels,
we can now mark out the lines on our cork before we start cutting.
I did find in terms of cutting,
a metal ruler and a sharp razor blade work extremely great for cutting this two-inch cork
because the blade doesn't go all the way through,
so when you snap it, it leaves a much more jagged and kind of broken edge,
not a super clean look.
And the best part of this all is after you've cut through half of the cork panel,
listen to this snap.
Ooh, nothing better than that.
Before I lift this beast of a tank onto the floor to install the background,
I wanted to mention that I did drill the back of this tank in order to install a bulkhead
to drain the excess water in the drainage layer.
Fear not, I did end up water testing it,
and it did need a couple little tweaks before it was completely watertight,
but nonetheless, I did get it there.
Don't ask me how, but I got the tank from on the table,
two down here, and now it is time to install the cork panels.
Just keep in mind, you have to make sure you account for that bulkhead
when lying it down on its back,
because if you don't, you will get a cracked tank,
or potentially worse, and completely shatter it.
To combat that, I used a couple extra pieces of cork chunks that I had lying around,
and to the seasoned builders out there, that probably seemed fairly obvious,
but I hope that I saved at least one person from just tossing this thing on its back
and watching chaos ensue.
Anyways, back to the background installation.
It's really quite simple,
and honestly, with proper technique, could probably be done standing up.
For this next step, though, you definitely need to use gloves.
I mean, if you love dried silicone on your fingers, I guess don't.
Applying the background panels is really as simple as you think it is.
Really, you just apply a generous amount of silicone to the back of the cork panels.
I would recommend no less than what I used here.
If you want to use more, you certainly can.
Once the silicone is applied,
waltz on over to your tank and toss it onto the background.
I'm not sure if it's too obvious in this video,
but you kind of see me slide it into place,
like place it maybe a half inch back and then slide it in all directions.
And that's basically to spread out the silicone as much as I can,
which makes for the most contact points between the silicone and the cork bark panels.
Once the cork bark is suction cupped, I suppose,
the technique I just described, to the glass,
I then load it up with as many heavy things as I possibly can.
And you'll see right now that those included a crate of water
and a few jugs of spare water that we had lying around.
Now, technically, you should let the silicone cure for 24 hours
to be completely cured and secured,
but it's pretty much dry after 30 minutes or so.
I'll leave it to you to make your own judgment
whether you want to move it now after the,
you know, half an hour, 45 minutes have elapsed
or you want to let it cure for that whole 24 hours.
But I ain't got time for that.
We're building a tank today, so I flipped it after about 30.
Now I just rinse and repeat that process
until the background is entirely covered with the cork bark,
at which point it should look something like this.
Wow, a flat cork back panel tank.
How exciting?
Not really.
And that's why we're going to be taking it
from what you see in front of you now to this.
That's the goal.
Makes it a lot more interesting, adds more visual appeal,
and of course, increases the space for your frogs
slash whatever other animal you're putting in this tank.
So now let's dig into how I did it.
The first thing that I did was to lay out all my manzanita
and I grabbed one of the huge bromeliads that I had
that I really wanted to incorporate into this tank.
And that's what I kind of based the whole scape off of,
honestly, was this one bromeliad.
The goal of having all your available wood
and a couple of the main pieces
that you want to include in the scape,
you'll be able to move things around
and kind of see what works where
and how you want to incorporate things differently.
So after several hours of moving branches around
and I even actually took to temporarily attaching them
to the cork bark background,
using super glue and cotton balls.
To explain that really quickly,
basically, you just place the cotton balls
where you want the attachment place
of your manzanita wood to your cork bark
and then you soak it with some liquid super glue,
which creates a highly exothermic reaction.
Basically, it means that it's really hot.
Do not touch it for a minute or two.
I speak from experience when I say that.
And after those couple of minutes have elapsed,
you will basically have like concrete
binding those two surfaces.
Now, the nice thing is,
is that it's not nearly as time consuming
as letting silicone dry or having spray foam.
So it's easy to just rip off the background.
It's very noncommittal, I suppose.
Now, after those several hours of moving things around
and gluing them in various different places,
I ended with this.
Now that I had the hard scape kind of established,
I really wanted to add more kind of depth to the tank
by adding square pieces
that will eventually be blended into the background.
So it allows the background to give the effect
that it's like more like four inches deep
rather than just the two
that the standard cork bark background is.
Now with that all covered,
we can finally get to the fun part.
It's carving time.
Like I mentioned at the beginning,
you'll need a screwdriver
and or a drill with a wire brush on the end.
And with that being said,
you should probably also fetch some safety glasses.
And honestly, a mask wouldn't be a bad idea
while you're drilling.
Because when you don't, dust happens.
Once you're set up with the tools that you need,
you basically have to let your mind go wild
and try and create something
that looks at least semi-natural.
The way that I do this
is basically kind of letting my mind go.
And because I've had many years of building tanks
and seeing these landscapes in the wild,
I typically have a pretty decent idea
of what I'm going for.
But even I do get a whole bunch of advice
from my friends like Troy Goldberg,
and in this case, a bunch of tanks.
So I send pictures out.
I ask friends what they think.
At the end of it,
I end up with a tank that I love.
So it's definitely paid off for me.
But just truly understand that
you might not love the first tank that you build.
Remember, you can always remove more.
It's a lot harder to add stuff back.
Now, as we near the end of our carving journey,
you can see just what a mess it makes
all across your floor.
I had wood chips spreading like
six or eight feet out from the tank.
Unfortunately, I did drop the ball a little bit
and only have a little bit of footage of me
and the method that I used to attach
the other wood to the background,
and that was foam.
So I basically spray foamed,
let it cure for just a few minutes,
sprayed some water over top of it,
which allows it to be more malleable.
Then I just used my fingers
to push it into the background.
So I had left foam to carve after it cured.
Then after it cured,
I ended up carving it
and covering it with silicone
and then actually using the cork dust
that was generated from the carving step
to cover the foam
so you can no longer see it.
And here's the results to that method.
The cork is entirely encasing the branches
and honestly, you'd be none the wiser
that it's actually foam back there,
not just cork.
And now we are finally at the point
of figuring out the substrate.
And for this tank,
I'm going to be using the filter foam method,
which includes using large pads of filter foam
that will be used for the bulk
of the entire substrate.
As I mentioned in the very beginning,
we will be using some other aqua soil as well.
In this case, it's going to be exoterra substratum
that will be used
to just add some nutrients to the base.
But the bulk of it will indeed be the filter foam.
So let's stop blabbing and get to it
because life is never simple
and they don't make these foam pads
to fit inside custom vivariums.
We're going to have to take some measurements here.
So I did exactly that.
And then it's time to start
cutting out the filter foam
in order to fit that bottom.
The easiest method to cut this filter foam,
in my opinion, was again with that metal ruler
and just a very sharp exacto blade.
That way you can cut fairly straight lines
right through the filter foam.
And I actually use a different tool
to carve it later on,
but we'll talk about that in a moment.
The goal here was to just fill
the entire bottom with foam.
And then after that,
it was to gradually create some depth
in the basically flat bottom
by building up on each end.
I decided to make the low point
towards the left side of the tank
with the highest point of the substrate system
being in the right side of the tank.
After I got the foam to the height
that I wanted it,
I ended up filling in the little gaps
around the foam
with more of the leftover cork chunks
that were removed during the carving process.
This fills in any space for baby frogs
or I guess adult frogs
to kind of dig their way down
and get under the foam.
That would be devastating.
Now this would look pretty rough
if it stayed this blocky
because that would take a lot of substrate
to cover those two inch ridges.
One of my Twitch viewers
while I was streaming
ended up suggesting a hot wire
to cut this foam.
And man,
what a game changer it was.
I'll leave a link to it
down in the description down below.
They're like 30 bucks on Amazon.
I would highly recommend this
because it cuts through the foam
like butter.
And now to spare you of the like 45 minutes
of me cutting foam
and putting it back in the tank,
we ended with a couple beautiful slopes
that kind of channeled
to one central point in the tank
off to the left hand side.
And now it's going to be much easier
to blend into the background.
And now it's just time
to mist everything down,
making sure to remove all the dust
and whatnot on the walls
and actually flush it into the foam
that we just put down.
This is in preparation
for the final stages of the tank build,
which is going to be adding the substratum.
We'll rip open this bag,
get it into the enclosure,
spread it all around.
And with fairly little effort,
the sponge basically just disappears
under the substratum.
Of course, later on,
I add some leaf litter as well,
but that will be after
planting the entire thing
and letting the plants
settle in for a few days.
Speaking of plants,
why don't we move on to that right now?
One of my favorite parts
of doing this build that is planting.
And if you guys are anything like me,
I watch these kinds of videos
to get inspiration about the hardscape
and setting up tanks.
But also one of my main focuses
for every build that I watch
is the plant selection.
And let me tell you,
I'm not going to let you guys
down in this video.
I will mention that I did actually stream
the planting on Twitch.
If you guys think that I should do
something like that on YouTube,
like a live planting stream
for the next large vivarium
that I'm building currently,
make sure you let me know
in the comments section down below.
It will be the same size
for a different locale of histrionica.
Hint, hint, wink, wink.
And it's going to be epic.
So let me know in the comments down below
if you'd like to see
a build video for that,
as well as some streams while planting.
Now, here's just a few shots of me
planting some of these plants
into the background.
You can see that I'm using
some coated wire.
Basically, that just prevents it
from rusting or at least
rusting as fast.
But it really works to anchor
your plants into the background.
Then I moved on to coating
this otherwise very dry log
with some sphagnum moss
in order to keep it moist,
especially while the plants
are establishing themselves.
I really wanted this to be
kind of a feature piece of this tank.
So that's what I did my best to do.
After coating this entire log
with some sphagnum moss,
I ended up wrapping it
with some fishing wire.
That way the frogs won't be able
to knock it off the branch
and it will allow time for this branch
to soak up as much moisture
as it possibly can and allow moss
and other various epiphytes
to root into it and grow
as they would in nature.
And here is the finished product.
This is everything I planted
on day one and two.
I ended up adding some more
as time goes on.
This is just setting it up initially
and I'll give you guys
like a six month update
later on this month
or early December.
In the meantime, however,
I wanted to bring you guys
across the tank
and actually left the plant
inside to show you the names
of each and every plant
that I planted.
Spoiler alert,
some have done well,
some not so much.
But all in all, I'm very happy
how this tank turned out
and I cannot wait to set up
this new one that's coming
in just a few weeks here.
Now that you guys have seen
all the plants that I introduced
into this enclosure,
I allowed it to mature
or grow in for about two
to three weeks before I ended up
adding the frogs,
but we're just going to do
a quick little time jump
and add them right now.
Hi girly, did you end up laying?
I feel like you might have.
One, two, so excited.
Now the first frog
entering the beautiful vivarium
is this gorgeous female
Ufaga histrionica fuego.
She did unfortunately require
a little bit of assistance
making her way into the vivarium,
but it all worked out.
And now the male Ufaga
going into the enclosure.
I did so not so gracefully,
but he did end up bounding
his way out of the cup
and then I caught up with him
on the leaf litter.
And there you have it, my friends.
We have created a beautiful
tropical ecosystem for our frogs.
I love the way this build turned out
and I hope you do too.
I know the frogs certainly have,
but that's for another video.
So stay tuned to the channel
for an update on this vivarium.
A lot has changed
since the filming of this video
and I am very happy with the results.
So I want to thank everybody
that made it to the very end.
If you did make it to the very end,
make sure in your comment
you leave some word of fuego.
That way I know
everybody with that comment
made it to the very end of the video.
I hope you guys enjoyed.
If there's anything you would like me
to highlight more on the second build,
please do so.
I'm considering doing like a very in-depth,
probably 35 to 45 minute long video.
So let me know if you'd like that
in the comments down below.
If you did like the video,
make sure you show that love
and click that like button.
Subscribe for more awesome content
on these frogs and much more
and we'll catch you in the next one.
Later!
