How to Sand Sheetrock Patch Around Thermostat

VideoJoeShows
86 followers
2 Video Views·Apr 15, 2026
https://www.youtube.com/user/VideoJoeShows
How to sand a sheetrock patch around a thermostat is what this howto video is about. VideoJoe has just installed some mud at a drywall patch area around an existing thermostat location & now he is ready to sand the sheetrock mud. How much sheetrock mud should he sand back off around the patch? What type of sander is he going to use? Could you use just a piece of sand paper to sand the wall patch? What's a hand paddle sander anyway? How to sand drywall & sheetrock patch areas is easy...when you know how. Watch & learn as VideoJoeShows you how to sand a sheetrock/drywall patch around a thermostat.
https://www.youtube.com/user/VideoJoeShows
I've got that first coat of all-purpose mud on here and I think I'm going to have to do a tight
skim on here when I get done but I'm going to just use my sanding pad my paddle sander my hand
paddle sander is what I call it. I'm going to sand this and incidentally what I like to do
I've got a I've got a drop light here okay and I put that on the wall because I can see so much
stuff and I have that much light on there if I take that away I've still got light in here but
it doesn't look like it does it or even natural daylight I think oh I can see all that I'll just
go ahead and sand that well you're not going to see everything because this is smooth wall
application when I get done no spray texture on it or anything I like to get the the light on here
so I just set this on the floor and kind of tilt it up at an angle and kind of keep it at an angle
to the wall I can see everything so there's a tip for you when you're doing patches and filling in
and stuff okay so now you want to blend this all in and you don't have to sand a whole lot
the more you sand the more mud you're going to take off obviously but you don't want to sand so
much that you're taking off your whole layer of mud you've already installed you know that's why
I like the light and I can see where I can where I have to sand a little bit extra and blend it in
once I blend in a line I can kind of go around it and sort of ask and blend in the surrounding area
okay do a little circular motion
and on this pad paddle sander what I do is when I put it on I usually fold the edges over now
it's already starting to rip because I pretty soon I'm going to need to put another piece on
but if I fold that edge over now I got a nice tight edge of the sand paper that I can put
full pressure on right around on corners and inside corners this will this edge will come up
the wall but this is wood I'm just concerned about the edge now if I would have just left this edge
out like that trying to sand that there's no way this edge is going to have enough
pressure on here so when I put this on I split the difference as I put it on there and then I
fold the edges over okay now I can beat I can bear right down on this edge I'm not
I don't have pressure on the right hand edge as I'm doing the left hand you know what I mean
I got this side up just a little bit I'm putting all my pressure on there get right up along the
edge now I can do the whole thing same thing up here in this edge I can put extra pet pressure
at the top just do it a couple times like that then because I have the light on here I can kind
of look at that see if I need any more still want to keep this edge I want to blow that stuff off
just in case the masking tape is not tight and mine is but last thing you want is to put this
masking tape up over on top of the sheetrock because then you can't sand that that edge right
in there and you just have you got to be fairly close but you remember this cover this thermostat
had an actual cover over it that fits on this edge a little bit so if you've got a slight
imperfection don't sweat it you know don't forget to blend in your top
I can see exactly where that ridge is because I've got my light on there
I'm glad I decided to put some mud around this thermostat
I mean at first I had a thought ever so quick thought that maybe I should just leave it
and paint over it and I thought nah I'm not gonna do that that's hokey Joe doesn't do stuff like that
I like to do things right you know getting this all nicely blended in there
now I've got to do this edge here now obviously I can't get the paddle sander in here but what I
usually do here's a tip for you when you get done with this pad don't just throw this away when you
go ahead and replace it here's an old pad I got and it ripped and uh it's still a good pad you
know so I use this for small little things so now I've got I've got some extra sandpaper here don't
I so I can I can just kind of fold this over however I need to do it you know to get in here
fold this edge over a couple times I don't have to go buy more sandpaper
or if I didn't have this I'd have to use it I'd have to take this one off and use this one
and or or use a brand new one I don't I don't want to do that I don't have to do that
you know you just want to be careful as you do this because you're putting a lot of pressure
just in one spot and this this um sandpaper this is a hundred grit and you can get finer grit
usually for these they have a hundred and also 80 and uh I don't know if they have any smaller
you just got to be kind of careful because this will eat your sheetrock up
you know so where I've already done it with the paddle sander I did it just a hair hard and I
I see something right there I got to blend in already so see you're all you're doing is smoothing
this out you don't have to get it so that you keep going on it and going on it and going on it
last thing you want to do is sand too much of this okay man that's pretty good
when I get all done I'll go ahead and paint all this prime it paint it and then I'll I'll
I'll also go ahead and caulk against this door trim all the way down and that'll look nice before
I put the cover back on you know because the idea here is when I get done with this
when you get done with your project I don't I don't want anybody to even think that you did
anything that's how you want to do it you know you don't want somebody to see oh I see that you
you patched around your thermostat oh yeah didn't I do a good job well obviously you must not have
done a good job if they see that you did do some patching and they see the patch you know
that's the that's a sign of good workmanship because if you can blend it in to an existing
condition and make it look like you were never even there that's the goal that's my goal every
time now do I get it perfect every time no but do I learn every time I do something so that
you know when I get done with this I'll think about it and think okay what could I have done
differently how well did it patch in what I did do and should I do it like that next time or should
I do it differently next time you know all that kind of stuff play that all back in your mind
and that's how you'll get better each time you do a project it'll just get a little better
and better and easier and be like second nature to you okay all right that looks good
and I think I could probably get by with this without putting any tight skim on here I'm going
to go ahead and put a tight skim on here and blend it in just a little bit wider around here
before I used a four inch I used a four inch knife and just kind of built this over where I
needed to around the edge here's my patch my patch down here is only let it's less than an
inch so this time you know I could take my four inch and bridge it all the way out to four inches
or if I wanted to I could take my six inch and bridge it out now mind you I'm hardly putting
any mud in here at all all that's going to do is is finish all this edge if there's any
imperfection at all you know what I mean then you can you can cover that up and I'm going to go
ahead and do that not for my benefit because I think this is okay but I'm doing this for your
benefit so that if you need to do this you'll know how it's done.
