https://www.youtube.com/user/VideoJoeShows How to use a compound mitre box crosscut saw for the first time is what this howto video is about. OK you are thinking about cutting & installing some baseboards (good for you!) but you haven't used a compound mitre box saw before & you want to learn on how to use one. Well you've come to the right place as VideoJoe will show you how to get acquainted with the compound mitre box cross cut saw & some of it's features. VideoJoe exclusively has used a compound mitre saw for most of his construction howto projects when it comes time to installing finish trim such as cutting & installing baseboards, installing door frames & door casings, cutting & installing closet cleats & shelving railings, cutting & installing window stools & aprons, & a variety of other types of things where he would need to use a compound mitre box crosscut saw such as the one he wants to show you. Using a compound mitre saw is easy...when you know how. Watch & learn as VideoJoeShows you the basics on how to use a compound mitre box crosscut saw for the first time. Not sure if you want to invest in purchasing a crosscut compound saw such as this? You can rent them at a rental yard too so try that first if need be. https://www.youtube.com/user/VideoJoeShows
First thing you want to do is you got to make sure you got enough
long space to the left hand side of this. I'm right-handed so I'm going to cut everything.
I'm going to set all the material on the left hand side of the saw and cut off little bits
off the right hand side. Okay so I want to I need to make sure I get a nice long area to work at.
Okay and you know me by now. I always use that little knee pad wherever I go.
The first trick you're going to need to know is how do you get this lifted up.
You may think that's funny but if you don't know how to do it you may get it back. You may feel
helpless that you can't start your project. You know because this is actually in the locked
position. You got to take this little button here and sometimes it doesn't work very well.
You got to kind of push down on this. Take a little bit of slack off. Just kind of wedge on
pull it out. See I thought I had it.
There. Gotta pull it out far enough. Now this will come up here like this. See
that's your first little trick to know. Just kind of get acquainted with this saw. I've not
used this particular saw before. I'm borrowing this saw from somebody and you should be able
to push this down. See if I can loosen that up. Okay push that down and then see you can
swivel this to whatever degrees you want which is kind of cool and it locks into place at zero.
Let's see where the next one is. 22 and a half and then I think at 45 it snaps too.
Yeah okay that snaps and then you don't have to lock this handle down but any other degrees
if you want let's say five degrees you can set it there. Then you've got to tighten this handle
down to keep this blade from moving. Keep this table from moving. Do you see what I mean? Always
make sure you do that on any part where it doesn't snap down into place and I'm glad I checked this
because it was on two degrees when I first looked at it. The last thing you want to do is when you
start cutting your wood is let's say it's on two degrees you got it all set down you start cutting
it you're not going to have square ends so when you butt it up against the wall it's not going
to fit properly will it? Okay so loosen that up snap that into place. Now maybe he had it at two
degrees for a reason. Maybe maybe this table is out of wax so you know before I start I'll probably
take a square and set it up do one cut and make sure that it's nice and straight before I start
cutting all my materials. They don't have to compensate but generally if this snaps into place
at zero like that then you know that's going to be a perfect 90 degree cut. Now here's something
cool this saw has that some other saws don't have you got this handle back here you got to loosen
that up and screw that a little bit and then this should fold down see how this folds down at an
angle that's pretty slick huh? Then you can tighten it back up at whatever angle you want you look at
that down there then you can cut your wood at an angle. You might have to do that depending how
tall your baseboard is or anything like that so you can you can put the the table at an angle you
can flip the saw over at an angle and work with it like that. This pops back up now to get a 45
see it's not it's not going over far enough before it's hitting this this little table
edge well on that table there's a little set screw on the side of it you can slide that back
and get it out of the way. I think you can see that you can get that you can get that out of
the way so then when you do 45s loosen that up keep that all the way down at a 45 it kind of
sets into place this one doesn't notch and set in any certain areas it's got a definite stop at
zero and a definite stop at 45 so if I'm going to do a 45 degree cut I can let it stop I'll still
check it and it looks fine and I can tighten that up and I want to make sure that this table
this little table extension on this side is over far enough so when I push my blade down
it's not going to hit it kind of awkward to cut this way but you know the trim comes out really
nice at the times you need to angle your your blade over and only flops over on the left hand
side you can't take this and flop it over to the right so every time you cut you have to cut this
way so sometimes you have to figure out on your trim okay how am I going to cut those angles if
you've got an angle on both ends let's say you got to think about it a little bit before you
you start cutting your material now in this saw here here's the outlet where
where uh the dust is going to come out a lot of it now this should have a dust bag on it
and then you know you could cut inside a house you know and it's not going to put out that much dust
you're still going to have some dust on the saw blade when you're doing it like that but because
I'm borrowing this from somebody and it doesn't have a dust bag of course I've got to leave it
outside because this is just going to keep flying out that way every time I make a cut
all right keep your dust to a minimum around your project especially like I said we've got hardwood
floor down even if I had a dust bag I think I would still cut outside depending where I'm at
if I'm up on a second floor and I've got to cut the trim and do the baseboard and all that kind of
stuff I might think twice about I might bag off an area or or just kind of deal with it make sure I
have a dust bag on there and clean up the best I can when I get done you know so think about your
project and work accordingly you remember this this is how I installed all the baseboard in the
other half of that same room the tall baseboard and everything it's possible and if that's all
the money you've got and if you want to do it yourself if you don't feel comfortable using this
electric chop saw miter box that will cut your hand off in a minute if you're not careful
you can use that it's going to take you a while longer but it is possible well you know there is
another option if you don't want to use that and you don't think you can use the electric saw hey
you can hire somebody else you can pay them bucks to do your job to do your little bit of baseboard
that you need installed you decide now if you noticed I'm just going to cut all my baseboard
right here off of the ground and some people they put this saw up on a sawhorse and they've got a
long table because you got to have something to keep the baseboard nice and straight and from
falling off the table you know what I mean and if you're going to be cutting all day long then it
makes sense to kind of set yourself up that way but because I only got a few pieces to cut
and generally as a rule I just cut down here on the ground and I don't seem to have a problem
with that I got to get up and down a little bit more and that's why I use my
my trusty old knee pad I like to get right down where my work is