Aimpoint T-1 Micro Red Dot Optic Review

Uniform & Arms
3 followers
1 Video View·Apr 16, 2026
Aimpoint T1 micro red dot Review.
Welcome back everyone.
Today we're going over what I consider to be one of the finest combat optics ever devised,
the Aimpoint T1.
I've had this one for a long time, years now.
Still never changed the battery, which we'll get into more coming up later on.
And ran out a lot of guns, from shotguns to ARs, to everything in between, and still going
strong.
So, keep slinging some wet dot range, get into it a little bit more up close and personal
inside, coming up next.
Aimpoint's been around making quality red dot sights for a long time, decades, but this
is one of the relatively new offerings.
It was released in 2007, and features what they call the Advanced Circuit Efficiency
Technology.
Basically, that's a fancy term for saying all the electronics within there are basically
insulated in a way that they can take shock, absorption, impact in ways that most optics
just can't.
And they're also going to last an extremely long time, be extremely efficient with their
batteries that they use.
This optic right here is rated for 5 years of battery life on setting number 8.
Honestly, I prefer a lower setting than that, but even at that setting, it's very bright
and it's supposed to last 5 years, but like I said, these came out in 2007.
I know guys that have never changed the battery on them since they've come out, and they've
always left them on, so it's probably going to last even longer than that, but that is
what they quoted at.
The red dot itself is a 2 or 4 MOA dot.
Turn it up there just so you guys can see it on camera.
You obviously don't need to keep it that bright for actual use, but a very clear dot, very
crisp dot.
That's one of the things out there that you're going to notice.
If you have a lower quality kind of knockoff of this, the dot will not be anywhere near
as crisp as what you're going to see on the Aimpoint, not even close, in fact.
That's due to, obviously, the electronics in there, as well as the coatings on the lenses
that help stop the starburst effect that you're going to see on a lot of lower quality optics.
The case on it is a hard anodized aluminum, and it is type 3 anodized, so it's going to
match well with a lot of your AR and other rifles out there, which are going to have
similar types of anodizing.
The T1 is compatible with all generation of night vision devices, and settings 1 through
4 are the night vision settings.
If you buy one of these and you're wondering why you can't see it on that setting when
you first get it in, that's why.
Once you get to 5, it is visible with the naked eye, and most folks are generally going
to keep it on settings 6 through 8, somewhere in there.
If it gets an extremely bright sunlight, if you're out in the desert, you might turn it
up to 9 or 10, but beyond that, you'll generally keep it somewhere in the middle there.
When you're looking through there, it is a parallax-free optic, so no matter where your
head is in relation to the dot, the dot's going to stay in the same place.
You don't have to worry about it moving or having to get proper head position, proper
cheek weld, to get the shot on target.
The optic itself is submersible to 80 feet, and like I said, with their battery life,
they quote it at 80 feet.
There have been tests that have dropped this down a lot further than that, and it has still
maintained its integrity.
When you get the optic in, it does come with this set of lens covers.
That said, everything about this set is pretty much top-notch, besides these things.
They pretty much suck, and they've got to go.
That said, Tango Down is now producing a cover for them that is much better, and we will
have a review of that down the road.
But moving on, you also get with it an adjustment tool, a red adjustment tool, but that said,
you really don't need it.
If you look here at the elevation and windage knobs, you'll notice these two little dots.
Also, when you look in here, you'll notice the direction that will tell you which way
you need to move your dot, depending on where your impact is.
Now, a good thing about these caps is that the caps are also a sight adjustment tool,
so you can actually stick the little button in there, it'll lock in, and you can make
your adjustments.
Your adjustments are roughly equivalent to half an inch at 100 yards for each click,
so if you're shooting closer than that, you can just do the math yourself in terms of
how much you need to adjust it.
Besides the lens covers, which are a very minor issue, the only downside I can really
see to the T1 is the price for most folks.
If it wasn't for the price, which generally, without any sort of aftermarket mounts, you're
going to get a T1, if you look, for somewhere to $550 to $650, so very expensive.
If it wasn't for that, my guess is every single rifle in America would be wearing a T1, at
least those that are not designed for any sort of squad-designated marksman rifle or
something like that.
Most guys who are expecting engagements from 200 meters and in, I don't think there's a
better optic on the planet than the T1, in my opinion.
It's just excellent.
It's a standard that I judge all other red dots by.
You can turn it on, leave it.
I've seen videos online of guys shooting these things with buckshot, doing all kinds of crazy
torture tests to them, and they just keep on ticking.
I'm never going to put them through anything like that, at least I don't hope to, but it's
good to know that if it happened, it would still be there and it would still be working
and I could count on it.
That's pretty much it, guys.
That is the Aimpoint T1.
It is a fantastic red dot.
It really is the standard, at least in my opinion.
If you guys have any questions about this optic, anything else we talk about here on
the channel, you can feel free to post them in the comments section.
You can also post over at my Facebook page, but as always guys, thanks for watching, thanks
for subscribing, and I hope to see you in the next video.
