Epoxy resin stone slice | Masherisha

Design & DIY
11 followers
29 Video Views·Apr 10, 2026
Hi. I have long wanted not just to draw with resin, but to make a cut of a stone.
There are special blanks for cutting stones now. They come in different sizes, different shapes,
whole. And these are the halves. For those who are interested, I, as always, left links to all
the materials in the description. Well, first, let's figure out where this fashion for stones
came from. In geology, there is such a thing as Jada. And those who are interested in resin
trends have probably come across this word in English on Pinterest. Roughly, very roughly
speaking, these are stone balls, although they can be not only balls, but also other similar shapes,
inside which mineral crystals are formed. For those who are interested, I will leave a link
to the site from which I took these pictures in the description. It is written in quite detail
and interestingly about this miracle of nature. To imitate the druce of stones inside, I take
broken glass from Ikea. It is sold there in different colors depending on the collection
and the time of year. And almost always at the end of the collection, that is, when I bring in
a new one or it is already on display, there are discounts on this thing. Apparently, few people
take it as a fluff around candles, and this is in the candle section. And I always bought it much
cheaper than the original price of this thing. But now, with the popularization of stone cutting,
you can buy similar broken glass for creativity in smaller quantities and in different colors.
I will also use this glass to create an uneven edge of the stone.
To do this, I took masking tape and glued it directly to the table, and put the blank on top.
They are very steep and their edges are super smooth, but this time I do not need it.
I take hot glue and while it is not hardened, I stick stones on it. At first I did it very
uncertainly, and then I realized that in this way you can directly form a rim, behind which
the resin will not flow out. To do this, you just need to pour a lot of glue and sprinkle a lot of
pebbles on it, and then manually form a rim from this mass, directly lifting the glue that has
flowed down. I have never burned myself, although the glue is very hot, as you know, but due to
the fact that I have poured a lot of stones, my fingers have never touched the glue. It is better
not to remove the extra stones right away, because there is a chance that some of them will
still stick. And then I just peel it off the tape and continue working on the uneven side.
It was more convenient for me to work in pieces and turn the workpiece towards myself all the
time than to spin around it completely glued. I did the same inside the cut, forming that very
druce of crystals. I cut off very protruding parts of the glue. And you can move on to painting.
I glue the paper with masking tape, which will protect the inside from paint,
and cover the outline with gold. I took this off in the summer, by the way.
I take off my protection and can mix the resin. Last time I showed you that my resin for rubber
turned yellow, although there is nothing wrong with that. We paint it, but the manufacturer
contacted me and told me that the new resin art kits are produced with a resin of a slightly
different, modified formula, and therefore the resin should not turn yellow like that.
The kit contained a lot of bright dyes and, as always, everything necessary to create a picture.
I wanted to make a semblance of amethyst, but not a direct imitation of how it looks in nature,
but simply to be inspired by its combination of colors and use all the purple that I have.
So I got out all my various paints and glitter, the color of which is close to purple and
transparent white. Regular glitter, resin dyes, shadows from Aliexpress, alcohol inks,
pearlescent pigments. In short, I really collected everything that I saw in my drawer.
I mix the resin. This is done in proportions of two, one. And I got a full glass, which made
mixing a little difficult. I pour it into the painting cups and mix more resin, because in
the case of such work it is better to have a little left or I will pour a little more than
there is not enough resin. And I start painting it. These cups, for those who do not know,
are reusable, so later you can take the resin out of them and reuse them.
On the side where there were no crumbs, I made a rim from masking tape.
If this is done without cracks, then the resin for the resonator, as a rule, does not leak from it,
because it thickens quite quickly. But just in case, I sealed the corners with glue from a gun,
because the tape in these places did not fit tightly due to the crumbs.
And while I was doing this rim, my resin, which was already mixed, thickened a little,
which is quite important when creating a cut of the stone. I start pouring the resin,
I start from the edge. There is gold paint on white that shouldn't be visible, so I take opaque
colors here. True, I slightly miscalculated the amount of this color, and the line from this edge
turned out thinner. But the white color saved me. I added a little line with a wooden stick and on
the left side, and then poured another color. Due to the fact that the resin thickened a little,
it does not spread as quickly as it could, but remains the desired lines.
Moreover, it does not mix very much with neighboring colors later.
There will be only a small smooth transition. Usually, when the resin is liquid, two colors
next to each other begin to penetrate each other, thereby creating a smooth gradient,
because the resin hardens for a long time, and these are liquids, and therefore it mixes.
And here we have it thick, and therefore the lines are clearer.
To make a very thin line, you can either use a tool or a wooden stick, or very quickly carry
the cup over the resin. But it is advisable to do this when there is already a little resin there,
and it is not at all necessary to always pour the resin close to the previous color.
The gap can be filled later, but in this case you need to make sure that it does not stick like this,
like here, to the neighboring layer somewhere, although, depending on the idea,
this may be more original. I fill the gaps with the remains of different colors and finish drawing
the veins. The resin has already thickened quite a lot, and I think you can see it.
And therefore the drawn lines remain thin. And while all my attention was focused on the center,
I did not even notice how the white interacted with the neighboring colors.
If you are not satisfied with such spots in your work, then by drawing lines from them to the edges,
they can be conditionally stretched along the resin when it has already thickened.
I also added some stones to the center next to the border of stones to smooth it out a bit,
so that it would not just be a protruding border like the edges,
but would still blend in with the picture. This way,
some stones would get into the resin and sink a bit into it, which looked better, of course.
My board was still slightly tilted, so when you work in the Resin-Aid technique,
it is better to first use a level to make sure that your work surface is level.
But, as you have already seen, the resin gradually flowed upwards during the entire work.
And I tried to put napkins underneath to level it out.
But thanks to this, some layers of resin seemed to flow onto each other.
Look, this is especially noticeable here.
And this gave a rather interesting effect, which is very well suited for this type of stone cut.
The edge, which was sealed with masking tape, needed to be processed.
The silicone glue came off easily, and in two places the resin leaked out a little.
This had to be corrected, so I painted large stones in the same gold color and
began to glue them over the flaws. And no, moss would not have suited this.
I also encountered the problem that some stones were falling off the edges,
because you saw for yourself how they were glued.
And some stones were held on literally by a millimeter of glue.
Therefore, I filled all the Mordex with a small amount of resin.
Some may ask, what to do with this now? This can be an element of decor,
it can be hung as a picture, it can be placed as a picture.
Isol generally made a table for herself in this way.
And I, considering this shape, wanted to make, well, more precisely, I made,
I don't know what it's called. In general, it's something like a decorative napkin for a table,
on which those things are placed that are permanently on the table, on a permanent basis.
That is, this is such a decorative zone of permanent table items, there, I don't know,
some beautiful vase, napkins. And it can be on a desk, a coffee table, or a kitchen table.
The main thing is that it is against the wall, because I didn't really process that edge,
which was straight, just so that it was at the edge and covered with something.
And I have another question for you. Well, tell me, would you be interested
if we made rubber art kits with some idea of mine? And what would you like?
Well, I hope this video was interesting and useful for you.
Many thanks to my sponsors for their support. I love you so much. Bye!
