I always want to hear your feedback so drop a comment down below ✅
I think I'll go back to another video, this time we're doing yet another Aiming for Grade 9 paper,
if you want to see the rest of these papers they are all on my channel, I've done so many of them,
which is basically a collection of the questions that Grade 7 to 9 students
struggled with on that year's paper, so in this case it was the 2023 papers,
and they give us a handy little mark scheme here as well. So basically if you were a Grade 9 student
in 2023 you scored an average of 28.4 marks on the questions we're about to do and there's 40
marks in this paper. So these are the collections, in fact the harder questions that we can come
across, and so yeah basically my hope for these videos that I'm doing is that I can get you,
if you're stuck on like a 5, 6 or 7, to get up to that 7, 8 or 9 by explaining the problem
solving behind it, because a lot of these questions it's either little things that
people neglect to know because you know they just forget to kind of study it, or it's problem
solving, and it's also things like special ways to use some of the common techniques that we have
in GCSE maths. Okay here we have an incomplete table and an incomplete histogram, and we have to
use the histogram to complete the table, and I'm willing to bet use the table to complete the
histogram as well, this question comes up fairly frequently. Now it also tells us something quite
important that zero people had a time smaller than 10 or bigger than 26, which is quite important,
so we can kind of ignore everything in the table above 26 or below 10.
It tells me that between 10 and 12 there is a blank frequency, but if you look 10 and 12 here
we can actually work out the area of the shape. Now the problem is we don't know what the frequency
density goes up in, so our first thing to do is to look for one of these, and in fact I'm going to
add frequency density as a column here, and class width, so for this one here it has a class width
of 3 and a frequency of 15, which means its frequency density should be 15 divided by 3,
which is 5. Now if you have a look on the actual graph itself or the histogram, 16 and 19 is this
bar over here, so we know that this height is 5, and now we can clearly see that each big box is
just 1, right, because 4, 3, 2, 1 and 0, so that works out quite nicely. So what we need to do to
this first bit now is to work out the frequency density, so it looks like this goes up in 0.1s,
so this would be 1.1, 1.2, 1.3, 1.4, 1.5, and then all we need to do is work out the area by doing
1.5 times 2, because the class width there is 2. So remember the special thing about a histogram
is the area underneath the bars equals the frequency, so 1.5 times 2 is of course 3,
so that's it for part a. Part b, using the table to complete the histogram, so which one haven't
they got? So they've got the first one, that's on there, 12 to 16 is also on there, that one's on
there, so it's just the last two bars. So again, frequency density is just the frequency divided
by the class width, so the frequency here is 9, divided by 2, because 21 minus 19, so that's 4.5,
and then we have 7 over 5, okay, so that's 1.4, and we can complete the last two bars. So 19 to
21, now what does this got? That's an interesting question. It looks like it goes up in 0.5, so 1,
2, 3, 4, 5, 6, 7, 8, 9, 10, yeah, there's 10 small squares, and that goes from 0 to 5, so 5 over 10
is 0.5. So what that means is, if we want to go from 19 to 21, we've got 19 here, 19.5, 20, 20.5,
21, we're going up to here, and then if we mark where the frequency density is, which is 4.5,
that's all the way up here somewhere, so it goes in 0.1s, right, so 4.1, 4.2, 4.3, 4.4, 4.5.
So now, if I zoom out slightly, we can match this up. Again, you should really use a ruler for this,
but you know, I never do. 21 to 26 should go up to 1.4, so 26 should be over here, right, because 25,
25.5, 26, and it goes up to 1.4, so it's one below this last one. So there we go,
that's it for part b. And for part c, it says the histogram gives information about the times taken
by 43 students to run a different race. Work out an estimate for the median of the times taken.
So to work out median, you're looking for the middle number. So here we have 43 students,
I'm going to divide it by 2, which gives me 21.5. So we're looking for the 22nd student.
So to do that, all we need to do is find out the areas of each of these bars and add them up until
we get to approximately 22. So let's see, does this also go up in 0.5s? It looks like it, yes,
it does. So that is 0.51, 0.52, so that width is 2, and the height is 2, which means there's 4
people in that first bar. Then it goes from, what is that, 10.5, 11, 11.5, 12, and then we're
looking for the gap here. So we have 1, 2, 3, 4, so that width is a total of 4, and that goes up to
2, so that would be 8. So we've got 4 in the first bar, 8 in the second. Don't forget, we're looking
for the 22nd, so so far we've got a total of 12 people. Then it goes from, so 1, 2, 3, 4 again,
up to a height of 4, so that would be 16. So 16 plus 12, that's 28 in total, so we're too far.
So what does that mean? Well that means that the median lies inside this part of the histogram
here, it lies inside that bar itself, because by the end of this bar we have a total of 28 people,
we're looking for 22. So if here we have 12, how many more do we need? We need another 10.
So we're going to try and find the area, or the place, where we can get 10 people in this bar.
So I'm going to say that's roughly here, and we want the area of this red section to be 10.
So that means we're going to have 4, because of the height, times some number, which is going to
be our width, gives me 10. So it's n is equal to 10 over 4, which is 2.5. So in other words,
the gap between this part here and this here is 2.5. So what would that be? Well if this number
here is 16, 16 plus 2.5 is 18.5. 18.5 seconds, okay. I thought it was minutes for some reason,
not seconds. That's it for part one, not too bad. A biased dice is thrown 60 times, the table shows
information about the number of times that the dice landed on each number, and we need to work
out an estimate for the probability that this dice will land on 6 both times. So here we're looking
at experimental probability, or you might have heard it called the frequency, or the relative
frequency, or something along those lines. So first of all we need to work out the probability
of getting a 6. The probability of getting a 6 is just the number of times we actually got a 6,
which is 15, out of the total number of times we threw the dice, which is 60. So that gives me 1
over 4. And the probability of landing on a 6 both times, well that means we want to do 1 over 4
times 1 over 4, which is 1 over 16, which is the actual answer. But a lot of people have trouble
with this because they forget about relative frequency. Remember that just because it's a dice
doesn't mean it's a one in six chance of getting a 6, right? That's if it was a fair dice, but not
all dice are fair. The answer is here, Sally is going to throw the same dice n times and record
the number it lands on each time. She will use her results to work out a more reliable estimate
for the probability in part a. What can you say about the value of n? This is a really really
good question, because they're trying to test if you know one thing about relative frequency.
And they've asked this in a few different ways. Sometimes they'll have someone throw it 60 times,
another person throw it 100 times, and they'll say whose value for the probability of getting a 6 is
more reliable? State a reason. Here's the hint. Basically, if you want to make it more reliable,
you need to throw it a greater number of times. The more you do something, the more reliable it
gets. Let me give you an example. Let's say we flip a coin, you and I, right? And we get heads
both times. Does that mean there's a 100% chance of getting a heads on that coin? No, it's just
that we haven't thrown it enough times. If we throw it 10 times, we might get 7 heads and 3 tails.
Again, that doesn't mean it's a 70% chance of getting heads. If you throw it a thousand times,
you'll get closer and closer to that 1 over 2 probability that we expect. So n just needs to be
bigger than 60. If it's bigger than 60, then it's more reliable, even if it's just 61.
Here we have a graph transformations question. I've got a video on that on my channel if you're
interested. But essentially, when we go from f of x to f of minus x, we are just reflecting in
the y-axis. The way I like to think of it, though, is we make all of the x-coordinates the opposite
sign. So if the x-coordinate is positive 2, it becomes negative 2. If it was negative 2,
it becomes positive 2. So here we can see the x-coordinate is negative 3. So that coordinate
is now going to be on the side of 3. And I'm just going to do this with every single coordinate.
So this coordinate here is minus 2, 1. So I'm going to become 2, 1. This coordinate is minus 1,
minus 1, 1. So now it's going to become 1, 1. And this one here is 0, 0. So it's going to become 0,
0. And that's it. That is literally how you do that graph transformation not too bad. You might
be shocked to see how many of these small questions grade 9 students struggled with, right?
But again, these small things really do add up. You only get to make around 20 marks worth of
mistakes before you start losing that grade 9. And that's across three papers that have 80 marks
in each. So how would I do this? Well, it says the bearing of B from A is 147. So if I draw point A
here, a bearing is always clockwise from the north line. So the angle of 147 should be something like
this, roughly. Because 180 would be straight down, 90 would be straight to the right, so it's
between those. So point B is somewhere down here. And we're trying to work out the angle
of A from B, which is again the clockwise angle. So we're trying to work out this reflex angle here.
Now again, I'm willing to bet that people that got this wrong didn't draw a diagram out,
because now this actually becomes super, super easy. We know that the two north lines must be
parallel because they're both pointing straight up, which means we can use angle, we can use
co-interior angles here to work out the angles. So 180 minus 147 gives me 33 degrees.
Then if I want to work out the reflex angle, all I'm doing is doing 360 minus 33.
And that's it. So again, draw diagrams out that will help you, especially if you're thinking of
doing A-level maths or A-level physics. Here we have quite an interesting ratios question. We have
2A to 5C is 6 to 25, and 4B to 7C is 20 to 21. And so we have to show that A plus B to B plus C
is 17 to 20. And the only real way that I can think of doing this is to try and figure out
what A, B and C are, but the only real way to do that is to combine the two ratios.
So what I would do is I would have something like 2A to 5C is equal to 6 to 25,
and then I'm going to have 4B to 7C is 20 to 21. And now all we want to do is try and make them
the exact same value. With this, there are actually a couple of things you can do. One thing's really
clever and it can make the questions a little bit easier, but I think that a lot of students
will struggle to kind of see how you can do that. I can actually simplify just the left side by
dividing both by 2 and then dividing both by 5 here. Now that might seem weird because normally
when you simplify ratios you're not allowed to do that, but if you remember the trick that I've
shown you in like a million videos before, you can write the ratio as a fraction. And if you notice
if I divide both sides by 2 now, that becomes 3, so I'm left with A over 5C equals 3 over 25.
If I times both sides by 5, you will actually get this, which is the same as just writing A to C is
equal to 3 to 5, which is the same thing as if you simplify this ratio over here, right? Like if I
divide this by 2, I get 3, divided by 5, I get 5. Now if you weren't too sure about that, if you wanted
to combine the two ratios, all you'd have to do is make the C's the same. So changing 5C into 7C and
7C into 5C, which again is a fairly trivial thing for you to do, right? You guys know how to do that,
it's not too bad at all. But yeah, I think we would just stick with the simplifying thing. Again,
that's a bit weird, a bit nuanced, but you can, you can do it. So we have A to C is equal to 3 to 5.
And then we have B to C is equal to 4 to 3, because again, sorry, not 4, 5 to 3, because we just
divide the first one by 4. And we divide the second one by 7. If you want to do the fraction
way just to prove it, you are more than welcome to. So now we have these two ratios, and we want
to make the number that represents each letter the same. So the only letter we have in common is
C. So I'm going to do is I'm going to make the 5 into 3 and 3 the same by timesing them by each
other. So I'm going to times this one by 3, this one by 5, and we get 9 to 15 is equal to 25 to 15,
which means A to B to C is just 9 to 25 to 15. And now what did they ask us for? They said that
A plus B to B plus C is 17 to 20. Well, A is 9 and B is 25, right? So A plus B is just 34.
And what was it, B plus C? Yeah, B plus C. B plus C would be 25 plus 15, which is 40.
I said 50, that was close. And if you notice, all I have to do to get that is divide by 2.
Cool. And you get the same thing if you just combine them the other way as well. But that's
a fairly tricky question. I don't know how many people would have actually gotten to that part.
I mean, obviously not very many. That's why it's in the Aiming for Grade 9 paper. But hopefully
that makes a bit more sense as to what you can do. Algebraic fractions, yay. Very fun, very good.
Yeah, honestly, this is probably just silly mistakes that cost people the marks. How many
marks is this? It's four marks. Yeah, I don't think this is difficult per se. I think it's more
just knowing, not even knowing what to do. I think it's just silly mistakes in the algebra
that probably cost people here. So what I'm going to do is I'm going to factorise everything
first, because that's always the first thing I do. I might also do the key flip chain for
this actually as well. So we have 14, and I can factorise the denominator here as 3x minus 7.
Remember that whenever you do this, you do want to factorise everything, just in case something
cancels in a minute. We're going to write this as x plus 4 over 1, and then we're going to change
that to times. That'll be 2x plus 3 on top because, you know, we flip it. Now factorising this,
I'm going to factorise out, what I'm going to do to factorise that is I'm going to factorise the 2 out
first. Remember that you can't just divide by 2. I can't divide by 2 because I haven't actually,
it's not an equation. This is actually something I see a lot of A-level students do as well,
is they would just divide the top by 2 to factorise it, because, I mean, you get taught that, right?
You get taught that if you have like a quadratic, if you can divide it by a number, you divide it
by a number. But the problem is, is if I'm just left with 2x squared minus 6x minus 56, it's not
equal to anything, and so I can't divide it because I can't divide both sides. Instead,
what you're actually doing is factorising out a 2. You need to be really careful with that.
Now we're looking for two numbers that multiply to minus 28, but will also add to give me minus 3.
So 7 and 4, so minus 7 and positive 4. This is 2x minus 7x plus 4. And again, if we quickly check,
yeah, cool. And I've already spotted on the side over here,
we have an x minus 7 here, so that might help in a second. Then we're going to times it. Actually,
the x plus 4, we can cross-cancel, but let's assume that you didn't know you could do that,
because again, in an exam, you want to be really cautious. We would have x plus 4 on the top,
2x plus 3. On the bottom, we have 2x minus 7x plus 4. So yep, we can cancel that out.
And now what we want to do is combine the fractions by making the denominators the same.
Oh, that's kind of interesting. They both have x minus 7 already. So instead, all we're going to
do is we're going to times the first one by 2, top and bottom, and the latter one by 3,
because that'll make it 6x minus 7 on the inside. So that is meant to be a 2, so that's 28
over 6x minus 7 plus 2x plus, oh, see, almost made a mistake. Do I want to expand it now? Yeah,
I do. 6x plus 9 over 6x minus 7. Now I can add these together. So we have 6x on top.
Then we're going to have 28 plus 9, which is 37. Do I want to expand it? I don't think we need to.
Oh, wait, no, we have to expand it. Okay, cool. I was just checking if we can factorise. We can't,
so although it looks like we should be able to, because there's going to be 6x on the top and
bottom, we actually can't. So that's a bit depressing, but whatever. Yeah, and that's it
for four marks. Again, there's probably like minor mistakes with the algebra in there for
most students. A, B, C, D is a quadrilateral. E, F, G, H are all midpoints, and they give us like
A to H is A, so I like to label these as I go along. A to E is B. D to G, which is here,
is C. And it says prove using vectors that E, F, G, H is a parallelogram. So let's just quickly
highlight where this is. So we have E to F, F to G. Let's prove that that's a parallelogram.
I would recommend drawing this, because this looks like a parallelogram, but why does it look like a
parallelogram? It looks like a, well, what's special about, I can't, I'm gonna say parallelogram
like 8,000 times. It's only a parallelogram if the opposite sides are parallel to each other.
So basically all this question's asking, and this makes the question a lot easier, is you need to
show that E to F is parallel to H to G, or G to H, whatever you want to call it, and that E to H
is parallel to F to G. If that's true, then it's a parallelogram. And that becomes slightly easier,
because how do you show that two vectors are parallel? You show that they're multiples of
each other, and that's it. Cool. Is there anything else that's a little bit weird on this? Let's have
a think. Is there anything else we need to do? No, I think we just need to start working out
vectors now. So that's fun, isn't it? Yep, cool. So let's just get started. I was trying to think
of like maybe a quick, easy way to do it, but I can't yet. I think if we start with the easier
vectors first, that might make my life slightly better. So E to H, for example. And the reason
why you should start with the easy vectors, by the way, is because you do get marks for working out
any vector. So if you work out an easy one, you get as many marks if you work out a harder one.
If you can't manage to finish the question. E to H, well that would just be going from E to A,
then A to H. So that'd be minus B plus A. Okay, so I've worked out E to H already. That was quick.
If I could work out F to G now, that'd be nice. I think I'm going to go for E to F next though.
E to F, well the only way to do that is to go from E to B, and then B to F. So this one I'm
actually going to write out fully. E to B, B to F. Now E to B is actually quite easy. Don't forget
E's the midpoint of the line AB. So if A to E is B, then E to B is also B. And that's actually the
same for the rest of these as well. So that's going to be B plus, now the problem is I don't
know what B to C is, but all I know is it's going to be a half of B to C. Now B to C,
whoops, B to C is quite an interesting one. It's actually not too bad. I can't go straight from B
to C, but what I can do is I can go from B to A, A to D, D to C. So B to A is minus 2B, because it's
minus B minus another B. So minus 2B, then it's going to be plus 2A, because A to H is A, H to D
is A. And then it's going to be plus 2C as well. So if I work all this out, since we're halving
all of this, this is just B minus B, which is nothing, then it's just A plus C. Okay, and I'm
going to write that again here. And I might put all these in boxes just so I can actually see them
better. Cool, we are halfway done, so to speak. What other ones do we need to do? So we've done
E to H. So we've done this one. We've done E to F. So we've done this one. Let's do H to G. I think
that's another easy one that we can do. In fact, this is easy. I know that I can put it here. How
do I know it's going to be easy? Well, if you notice, from H to G, it's just H to D, D to G.
So we actually already know those values. That's just A plus C. And if you notice, it's parallel
to that one, as expected, which means since we've had one too easy and one difficult, I'm willing
to bet the last one's a little bit difficult, and it is. Cool. F to G. Actually, we did E to H.
Yeah, we did. So F to G makes sense. Okay. F to G is just going to be F to C, which is a half of
BC again. That should be C. No, it isn't, that is it. It's gonna be a half of BC plus
or minus, in this case, minus C. See, that's going to be a half of minus 2B plus 2A plus 2C
minus C. So this is going to be minus B plus A. And once again, if you notice, we said we need
to prove that EF and GH are parallel to each other. But if you notice, they're the exact
same vector. So EF equals HG, or GH, whatever you want to call it, therefore parallel. It also
means they're the same length, by the way, which is also a feature of a parallelogram, is the
opposite sides are parallel and the same length. The reality is, if the opposite sides are all
parallel, then they have to be the same length anyway, so you don't really need to say that.
And then we also have that. So we've done EF and GH, right? Yep. We also have that EH and FG
are also the exact same vector, right? So EF and that should be HG. Yep, it was HG,
therefore parallel. So then you just write, and you do need to write a conclusion, right? So what
that they're parallel? What does that mean? Opposite sides are all parallel, therefore
parallelogram. Okay, you do need to write some kind of conclusion, otherwise they don't, they
drop you one mark, which kind of sucks. Bit of a shocking question to me here, to be honest.
I'm willing to bet the rest of this was a little bit trickier. Showing that there's a solution
between two values. Again, it's something that doesn't come up very often, and so I was surprised
because it's not that difficult, but then I'm not surprised because we don't go over it that much,
right? Because it doesn't come up that often. So if we think about this logically, for this
equation to equal zero, we need to show that there's a solution, because there might not be a
solution. Look what happens when I sub in x equals one and x equals two into the equation,
right? And again, I'm subbing it into just the left-hand side, so I get one plus two is three
minus six is minus three, and then I get two cubed is eight plus four is twelve minus six is six.
Now, what do you notice? Well, what do you think we would get if we subbed in something? By the way,
you don't need to do this for the marks, okay? This is just for your... I'm going to put it in
red because it's just for your understanding. What do you think would happen if we put in 1.5,
right? Well, I'm going to use my calculator and I'm going to show you. Plus two times 1.5 minus
six, I get a slightly positive number, okay? Logically speaking, every value between one and
two is going to give me a number between minus three and six, right? I'm not going to get like
minus five if I sub in a number between one and two, and I'm not going to get ten if I sub in a
number between one and two. So if I keep up that pattern, if I sub in a number between one and 1.5,
I should get a number between minus three and 0.375. And if I keep getting closer and closer
and closer, logically, between these two numbers, there should be a value of x where the equation
equals zero, right? So in general, here's what you write for the final bit. So you sub in the
two numbers, which gives you one mark, then you need to write this. And this is true in A level
as well, by the way. Change in sign implies existence of a solution. So what does that mean
in like simple language? Well, if I'm looking for when this equation equals zero, and I found two
numbers, one where it's negative, one where it's positive, between those two numbers, there should
be a value where it equals zero. Because if I draw a graph, right, if I just draw any graph
like this, if it's negative here, and it's positive here, between it, it should go through
zero. Because it's a continuous line, right? It's impossible to go from a negative to a positive
without going through zero, if it's a continuous line. Okay, we have a few more questions left.
And this one I've actually done on the channel a couple of times. I've done it as a separate video
as well, because it's a really, really good question. And by that I mean it's difficult.
Simply put, the diagram shows eight identical regular octagons joined to enclose a shaded
shape. And we need to work out basically the area of the shaded shape. Now the first thing
you notice, this is like a Star of David or something, we don't know how to work out the
area. But if I cut this off, the first thing I notice is because all of these octagons are
identical, that means all of the sides of this shape are identical. Which means this inner bit
is literally just a square. So if I work out the length of one side, I'm done. Right, that's nice
and easy. Now the length of one side is going to be, in fact I'll write this in red, a plus a plus
something over here. And I don't know what that is yet, but it's not going to be too bad. Then
we're going to have these triangles. And for the exact same reason that I just explained,
they are all going to be identical because all of these octagons are identical triangles.
Sorry, are identical octagons, which gives us identical triangles. So for now, what I'm going
to do is, that is a scalene triangle if I've ever seen one. It's fine. Both those sides are a,
and we're going to work out what the bottom side is. You know what, I'm actually really not happy
with that. That's way too, that's not isosceles enough for me. Now the reason why I'm saying
isosceles is not equilateral is because, well, it's definitely not an equilateral triangle,
or at least we don't know that it's an equilateral triangle yet. So I'm just going to say isosceles
for now. So all we need to do is work out the area. I say that as if it's easy. It's not,
but let's, let's get through it. What would I start with? Well, one thing that you can start
with is you can work out the angles inside this triangle in order to use trig to find out what
the base length is. Because what I was thinking is, if we cut this in half, we need the height
anyway, because the area of a triangle is a half base times height, or half a b sine c,
whichever way you want to do it. So either way, I think it's useful to work out what that angle is,
and hopefully you would agree with that. To do that, if I zoom into one of these octagons,
it doesn't matter which one I use, but this angle, that's just the exterior angle of one
of the octagons. And to work out the exterior angle, you're just doing 360 divided by the
number of sides, which is 8. Yeah, I think that's probably the easiest way to do it,
which gives us half it, half it, half it, 45 degrees. Okay, I actually know what kind of
triangle this is, but it's probably not relevant for you guys, so I'm not going to bother. So
that's 45 degrees. So I can work out the height now just by using good old-fashioned trigonometry.
That's the opposite side. That's the hypotenuse. We're looking at sine. So we have sine 45
equals the opposite side, which is the height that I want, over the adjacent, the adjacent,
the hypotenuse, good lord, which is A. So the opposite side is just A sine 45, which you might
know is just root 2 over 2. So we can just use that. Root 2 over 2, A. Cool, which means I can
now work out the area of all of those triangles, which is quite nice. In fact, I might just do
that. Well, either way, we need to work out the base regardless. So why don't we also work out
the base? The base is the adjacent side over here, which is actually going to be the exact
same value, isn't it? Yeah, well, that's nice. For the same reason, cos 45, don't forget cos 45
and sine 45 are the same value. So it's literally going to be the exact same thing. So that means
the adjacent side is root 2 over 2, A, which means the total base over here is going to be
root 2 over 2, A times 2. So the base is going to just be root 2, A. So area of the triangles,
let's do that now. We have a half times the base, which is root 2, A times the height, which is
root 2 over 2, A. Now I'm going to be careful here. Root 2 times root 2 is 2. So that's going
to be 2 over 4, A squared. So it's going to be a half A squared. Now how many of these triangles
do we have? We have 1, 2, 3, 4. So we're going to times that by 4. So we get 2, A squared. Perfect.
We also know now the length of the side of a square because it's going to be 2, A
plus root 2, A. So to work out the area of the square, we're just going to square this.
So let's do that. 2, A plus root 2, A squared. I'm going to write this out as two separate
brackets just to make it a bit easier to see hopefully for all of you. If I could actually
write the correct thing, then maybe that would help. Plus root 2, A. So 2, A times 2, A. So
let's draw the little dotted lines. We get 4, A squared. 2, A times root 2, A is going to be 2,
root 2, A squared. Then we're going to have the same thing again because you always do.
And then lastly, root 2 times root 2 is 2. 2, A times A is 2, A squared. So I get 6, A squared
plus 4, root 2, A squared. And now for the total area, we're going to take that area and add it on
to the end. So I get 8, A squared plus 4, root 2, A squared. Bloody hell.
Now, getting it in this form is actually really interesting, the way that they factorised it.
I don't really see the point, to be honest, but this is what they've done.
I would start with the A squared. Let's factorise out the A squared and we're just going to put it
on the end because that's what they've done. So if I factorise out an A squared, I get 8
plus 4, root 2. Now normally you would put the A squared at the front, right? But does it actually
matter if I put it at the front or the end? Functionally, they're the same thing and that's
all they've done. The only reason why I know to do that is because they've done it in the question.
Now let's look at the inside. The bracket says 2 plus root 2. Well, if I look here,
if I divide 8 by 4, I get 2. If I divide 4 root 2 by 4, I get root 2. So all they've done is they
factorise that at 4 as well and they put that 4 at the front for whatever reason. It's not more
correct than anything else, but I mean in this case it is because that's literally what the
question is asking for. But yeah, that form is a little bit odd to put it in, but hopefully that
makes a bit of sense. Always remember to look back at the answer to see what form they want it in.
If you started doing some weird manipulation here, you might not get to the final answer.
I know some people factorised out like 4a squared or something like that and then they got confused
about how they write it like this. We have a fairly interesting Venn diagram question. It
looks a bit tricky because there's a bunch of algebra which kind of sucks. So Vicky has a
collection of medals. Weird flex. The Venn diagram gives information about the medals,
where a is English apparently. I'm going to write this on top because I don't know why they didn't
choose e and g, right? But whatever, right? So English and gold. Vicky is going to take
a medal from her collection, given that the medal is gold. So this part here is actually
is to do with conditional probability. When they say given that it's gold, it means we're only
looking inside this region over here. That's the only region we're looking in. The probability that
the medal is English is 2 over 11. So how would you normally work out this probability if you
had numbers? What you would do is you take the number of English medals that are gold,
which is x, right? Because that's the overlap, x. And you put it over the total number of medals
in that little collection there, which is gold, which would be 5x minus 3 plus x. So 6x minus 3.
And they're telling me that that should equal 2 out of 11. So here we just cross multiply.
We get 11x equals 2, 6x minus 3. Let's expand those brackets. x equals 12x minus 6.
I'm going to swap these around. So we get x equals 6. Now, that is not the answer to the question,
which again, I'm willing to bet there are people that left that as the answer and went,
yeah, that's good. All done. What have we worked out? We've worked out x, which is the number of
gold English medals. That's not the total number of medals. The total number of medals is now we
sub in 6 into these equations here. We can just add it all up. Now, to be honest, I'm trying to,
probably the quickest thing to do is to add it all up first and then sub in x equals 6.
So let's do that. We have 7x plus x is 8x, plus 5x is 13x, minus 11 minus 3 is minus 14,
plus 34 is plus 20. Now, if we sub in x is 6, we can work that out. So that'd be 18,
78, 98 medals, which is 98 medals. These better be chocolate ones, man. 98. I'm probably going to
annoy a few people by saying this, but again, this is another interesting question. So we have
these similar triangles. And again, this is the big hint is the fact that we're talking about
similar shapes, which means the first thing that should pop into your mind is scale factors.
Now, here's the problem. When I gave this question out to some students before,
their idea is to just kind of like square these numbers. And it's like, oh, it's 1 to 4 to 9.
And they go, oh, that's kind of close to this. So they times the middle one by 2 and the last one
by 3. I don't know why, but whatever. Instead, if we draw this out, it might make a bit more sense.
So A, B is 1. So we're going to put 1 here. B, C is 2. C, D is 3. And they want the, if you notice,
the area of A, B, G, and then B, C, F, G, and then C, D, E, F. Now, the reason why this is
interesting is because the problem with the students when they squared it is those shapes
are not the same shape. So they can't be similar. The similar shapes are the triangles. So if we
draw out the triangles, we have a really small one, which is A, B, G, which has a side length of 1.
Then we have A, C, F. Again, I'm just drawing what it says on the actual thing over here,
which is slightly bigger. A, C, F. Those sides would be 3, right? And then the biggest shape
all the way at the bottom. A, D, E. And again, the length of that side would be 1 plus 2 plus 3,
which is 6. God, that is the worst E I've ever drawn in my life. So that's the first thing I
would do because it tells me three similar triangles. So if I want to work out a scale factor,
I have to, you know, draw out the triangles, right? To work out the length scale factor.
We can now work out the scale factors between each of these triangles.
So what we'll see in a second, right? If we can just write them on the sides we want,
it times by 3 and then it times by 2. Maybe we'll want from A to there as well, but let's see,
right? Let's wait for a second. So the area of A, B, G. Well, that one's nice and easy. We would
just square 1, which makes sense because the first thing is 1, right? Again, that's a scale factor.
The reason why we can choose the scale factors and not the actual areas is because when we have
scale factors, that is a ratio, right? Like if I say the lengths are in the ratio of 1 to 3,
I don't know that the length of this is 1 and the length of this is 3. I just know it's some
multiple of that. So it could be 2 and 6, 3 and 9, and so on. So that's why we're allowed to do
that. So this one, yeah, it's going to be 1 squared. Cool. Now, B, C, F, G. What do you
notice about it? Well, I'm going to get rid of these lengths for a second. B, C, F, G is here.
Can you see that it's just the medium-sized triangle minus the top triangle? So what
that's going to be is it's going to be the scale factor from here to here. So 3 squared
minus 1 squared. And if you do this in your head, you can see that's actually going to give me 8,
as expected. Now we're going to do the same thing with the bottom one.
Let's see, we want the, what is it, C, D, E, F. So again, C, D, E, F. C, D, E, F is just the big triangle
minus the medium triangle. So what we're going to do there is to go from here to here,
that is a different, that's timesing by 6. So we're going to do 6 squared
minus the medium triangle, which was 3 squared. So what does this give us? Well, it gives me 1.
3 squared is 9, minus 1 is 8. 6 squared is 36, minus 9 is 27. There you go. That's it,
for three marks. That is not the easiest thing in the world, I'll admit. In terms of getting some
marks, you do get marks just for working out the different scale factors and things like that.
It's the last bit, which is the last one or two, yeah, it's the last two marks, to be honest,
which is a little bit tricky. But again, hopefully I've explained it in a decent way.
If you found the video useful, please do consider subscribing. And if you are interested in tuition,
there's a link in the pinned comment and in the description. I'll see you in the next one.