You know the math, you’ve done the revision, so why are you still stuck on an 8? In this video, I’m breaking down the 5 technical exam mistakes that cost thousands of marks every year. From 'Rounding Traps' to 'Ghost Steps' in algebra, these are the non-math errors standing between you and a Grade 9.
👋 A few spots left for GCSE & A-Level tuition for this term. Book a free trial lesson here: https://www.mitchell-dye.com/
I always want to hear your feedback so drop a comment down below ✅
You've done the past papers, you know your circle theorems, you can solve quadratics in your sleep,
but when you mark your papers or when you get your marks back you're still sitting at a high 8.
Why? Why do you see scenes like this where you're a few marks from getting a grade 9?
Well usually it's not because the maths is too hard, instead it's due to the technical errors
and the technical mistakes that you make during your papers. At the grade 9 level the examiner
isn't just testing that you know the maths, they are testing your precision. In this video I'm
going to go through the five technical mistakes that cost students thousands of marks every single
year, so that way you can fix them before GCSE 2026. Mistake number one is what I call the
rounding trap. Let's say you have a situation like this, it's a sign wheel question and you're
working your way through it and on your calculator you get 8.324. Now a lot of students would then
round this to 8.32 and then continue on with the question before going on to the answer. Do not
do this. Every time you round during a question you're going to make your answer slightly less
accurate and this will have a compounding effect, which means by the end of the answer when you need
to give it to one decimal place you might get 241.5 or 241.3. This costs you the A1 accuracy mark,
which again is just the needless mistake that you don't need to make. Instead what you want to do,
and this is how I illustrate this to my students, is I put a dot dot dot. The reason for this is I'm
actually going to save the exact value on my calculator by using the answer button on my
calculator to store the number. This makes my life a hundred times easier and it ensures that I
don't make that mistake because your calculator stores numbers to 10 decimal places which is more
than enough for you to get those marks at the end of the question. So again in short the fix to this
is use the ANS answer button on your calculator. If you really have to write down the number and
you, you know, have to round it, try and do it something like five decimal places to ensure that
you do not lose that accuracy mark at the end. Mistake number two, ignoring the command words.
If a question says something like calculate they just want the answer, you get the answer, you get
the marks, job done. If the question says show that or prove that, the answer is already on the page
which means you do not get the answer. You don't get any marks actually writing down the answer
because they've already given it to you. Instead you're getting marks for each individual logical
step that leads you to the answer. I see grade nine students lose so many marks because they
skip the obvious steps. Again when they're saying show that you need to treat the examiner as if
they're someone that you're trying to teach. This means every single line of working out needs to be
one operation. Okay that means you're not skipping any steps and you're showing every single step in
order to get to that final answer. Another great example of this is formulas. For example if you
use Pythagoras's formula a squared plus b squared equals c squared make sure you write that down.
Don't assume that your examiner knows what you mean. This is again another place that students
lose marks. Mistake number three is the algebra ghost step and I call this a ghost step because
if you skip out a step which is generally what you've done and you get the answer wrong there's
no evidence for me the examiner to see that you know what you're doing. So I've got a good example
here. This is the ideal in blue what you want to do. Every single line of working out is one
operation. So in the first one I times m minus three then I expand then bring it over and then
you get to the final answer. Now here it's a lot quicker and this is what I see a lot of grade
eight or nine students do. It's a lot faster but the problem is I've actually made a mistake
somewhere and I don't get the exact right answer. There's a negative sign instead of a plus sign.
Now because I haven't written all of the steps I've actually lost more than just the accuracy mark.
If I write down all the steps and get the wrong answer I can get three out of four marks
but here I might only get one mark maybe two if I'm lucky which again is a massive massive
difference. You want the examiner to have evidence to give you those method marks.
Now realistically how much longer is this actually going to take you? It takes a few extra seconds
and it just guarantees you don't lose those silly one or two marks in simple algebra rearranging or
even arithmetic when you're showing something else. This one's a silent killer and it's kind of
similar to the last one which is the infamous calculator mis-input. The number of times I've
marked people's work and they've written down the exact right thing and they've gotten the answer
wrong is astonishing. I see this with high level students as with a level students as well. So give
me the exact right thing on a piece of paper and I'll type it in my calculator and get a different
answer to them. The most common mistake that this happens on in terms of GCSEs is the infamous
putting a negative into a quadratic. Now what I want you to do very quickly is if you have a
calculator in front of you if you a lot of people would do this right or they'd do like a time sign
instead plus three and then I want you to try this with brackets and what you're going to notice is
you get two different answers. The reason for this is our calculator will work out minus three squared
as minus nine which isn't what the equation is telling us to do. The equation is telling us to
square minus three which is minus three times minus three which is positive nine whereas this
thing here we've typed into our calculator is we're taking the negative of three squared which is
negative nine. So this here gives you the wrong answer whereas this one gives you the right answer.
So what's the fix to this? I would recommend, in fact I'd enforce this, use brackets anytime you
substitute numbers in. Anytime. Another thing I see is when people press sign, let's say you're
doing the sign rule and what you're trying to do is you're trying to do sign 46 times three. Now
what they'll do is because when they type into the calculator opens brackets they do this and
they don't close the brackets. These two things do not give you the same answer which again is just
costing you stupid marks because how long does it take you to press the close bracket button? A tenth
of a second? Two tenths of a second? In short it doesn't take very long to just make sure you put
everything in brackets when you're substituting in and this will stop you from losing the accuracy
mark at the end. Bearing in mind you have 20 to 23 questions per paper. If you're losing accuracy
marks you can lose up to 20-23 marks just from entering in things wrong into your calculator.
It's ridiculous. Mistake number five, the communication mistake. So here I've got a really
good example of a question and it says here find the size of angle BDC and this student has actually
done this perfectly with the answer was, in case you're interested, 120 degrees but this is a four
mark question and this is also true for things like angles on parallel lines. You get four marks
for the answer even though it's only two or three steps of working out. Now this student would only
get two marks even though they have gotten every single step correct. Why? Because of this bottom
highlighted line. Give a reason for each stage of your working. In questions like this, here's a
general rule of thumb. One mark per line of working out. So if I've only done two lines of working out
I've only gotten two marks. Where are the other two marks coming from? They're coming from the two
reasons that I've used in this question. Whether it's angles on a straight line,
vertically opposite angles, co-interior angles or whatever. You get marks just for having those.
This loses so many grade nine students the marks because they do things very quickly and they do
things in their head but they're not giving reasons. You need to give legitimate reasons
that every single step of your working out if they say so. And again this is true in a show
that question as well but this costs so many marks for students and it's very frustrating as
a teacher when you see someone that's stuck on an eight or stuck on a seven and they can't get to
the next well they think they can't get to the next grade but it's because they're making silly
silly mistakes like this. So what's the fix for this? Well first of all it is doing that practice
and learning those mark schemes so you know how many marks you're getting. Generally for questions
like this you want to give at least two reasons so that's one way to fix it but also in the last
10 minutes of a paper make sure you do a final sweep. Now a lot of students when they check their
papers they just try and rework out numbers that doesn't really help them that much. Instead you
want to check did I round to the correct number of significant figures or decimal places? If they've
told you to. Have I shown each step of my working out? Have I given a reason for each step of the
working out? If they've asked for it in a show that question have I given one operation per line?
All of these types of things because you can go back and just add them in very nicely
and that way you can ensure that you don't get those uh don't lose those marks. The grade nine
isn't won by just knowing more maths it's also about knowing how to actually take an exam.
Which of these five mistakes did you make most in your last mock or in any practice papers that
you've done recently? Please drop a comment below because I'm very curious to see which one is
actually the most common outside of my own experience and if you want to put these techniques
into practice go watch my grade nine paper one walkthrough which came out quite recently for
2026 where I show you how to apply these rules on the hardest questions that have ever come up
in the past.