“SMC KB-36 36-inch Spinner Ceiling Fan | Living Room Installation with Default Downrod”

TV Electric Fan
2 followers
27 Video Views·Apr 25, 2026
An SMC KB-36 36" spinner ceiling fan in brown/brass installed in the living room using the default short downrod. There is a significant manages to stir up the air in the room as well as some of the 52" fans I've had in this space.
Hello viewers, here is the SMC KB36 36-inch spinner ceiling fan from the mid-1980s
installed here in the living room. On the default, I think it's a four-inch downrod.
This is a very, very cool install. Not the most practical I've done in here, but it looks so cool.
This is very high off the ground. The blades are probably about close to 10 feet off the ground,
I would say. This reminds me of so many installs that I used to see in public back in the 2000s
where the fan was way too small for the area and way too high up off the ground to be effective.
From an aesthetics perspective, I actually think that this works pretty good.
What I found after experimenting with fans on different downrod heights is that
it has to be either very close to the ceiling or about two feet down.
When it's very close to the ceiling like this, the fan is visible above the beams. So I can come
here in the kitchen and still see the fan, which of course is very important. And then when I come
into the room here, it's still visible above the beams. If I come over here, it becomes visible
below the beams. If I come back to the corner, it's visible above the beam. So even though it's
very small and very high up, it never disappears. It's always visible. And the color scheme and the
styling is perfect. It blends right in. It looks period correct. It's a good match to our light
here. Okay, let's shut it on. We'll shut it on low first. I'm not going to be taking any
specifications during this demo because we already know what the performance is like from when it was
installed in the media room there. Same height downrod. I was very surprised by how much of a
difference the performance increased by on the two foot downrod. I always figured that with
large fans, like a 52 inch fan for instance, that would make good sense because it gives you much
more space for air to get on top of the blades. But I didn't think it would make as much of a
difference with something like this. You know, but then again, if you take a box fan and stick it up
against a wall with five inches of clearance, there is a significant difference in performance.
So I guess it makes good sense. This handled this room with ease on the two foot rod. Here,
it's okay. On high, it actually does still stir up all the air. I would say as good as some 52
inch fans have, but it becomes very noisy. Not so much in person, but I have seen a lot of pictures
of installs of this fan and other variants similar to it installed in situations like this, where
it's in a very large space on a high ceiling. And you know, I kind of used to think, oh that's a
ridiculous install. And in some ways it kind of is, but these are quite capable. Now unfortunately,
I can't get a nice aesthetic low speed for this demo because the speed controller that we have in
here is not, it does not play well with these in terms of getting a nice slow low. It works fine
for the regular three speeds. In fact, that's what we're demoing it on, the three speeds from
the wall control, but it doesn't give me a good slow aesthetic low like it does with some fans.
Okay, let's shut it on medium now. Now the stove is on right now, so the amount of air this is
pushing is reduced by the heat drafting up to the ceiling. And that's definitely hindering
the performance considerably. I can feel some air coming down, but it's very minimal.
I've been having to use this on high to properly push the heat back down,
which would be fine if it wasn't so loud. It's very noisy on high. And I think being closer to
the ceiling also amplifies the noise because it didn't seem like it was all that noisy on
media. I mean on the two foot rod, but on the default rod, it's kind of noisy.
Now we'll shut it on high, which of course is the fastest speed. And we'll give it a minute to start
pushing the heat back and overcoming that draft and creating its own.
Now it looks like, let's see, what would be the multiple of 60, 120,
240, 300, 360, 400. So that's about 420 RPM based on the
camera frame rate, because the camera is about 60 frames per second.
Make sure I'm calculating this correctly. Last time I measured it, it was around a 413 RPM,
I think. Let's see, 60 times 5, 60 times 7. Yeah, 60 times 7 is 420. So that's running at just about
420 RPM, which is crazy. So there was a bowling alley many years ago back in the 2000s. And I'm
pretty sure I actually was able to find pictures of the bowling alley, identify which one it was.
Unfortunately, the fans are not there anymore. They've been replaced by some
ugly modern junk that probably doesn't move a quarter as much air. But there was a row of,
I don't know, 15 of these things. Not this model with the switch housing, the model without the
switch housing. And I vividly remember when we were there bowling, these fans were on.
I remember that sound. These have a very distinct sound and the amount of air rushing
down from the ceiling. It was unlike any other ceiling fan I'd ever felt.
And this is exactly just like it. The noise is exactly the same. I remember that sound
and the force at which the air is coming down is unbelievable. I was so disappointed when I
found those pictures and saw the fans are gone. That was one of the top three installs I wanted
to see again. And unfortunately, I'll never be able to. It's a small column of air, but it's
such a strong high velocity column of air coming down from the ceiling. So as far as the airflow
goes, if I come over here and stand by the computer in the corner, I can feel air coming
up off the floor, but nowhere as near as much as when it was on the two foot rod. Looking at the
plant, there is a pretty good amount of air moving around. I still think that this is stirring up the
air better than some 52 inch fans I've used in here. And keep in mind, the performance is slightly
reduced because the stove's on. Actually, what I could do is I can shut this off for a minute,
see if that makes a difference. It does. It's a little more steady stream now.
Yeah, I feel a good amount of air coming up over here as much as I felt with some 52 inch fans.
And look at the whole plant is moving. The performance of these things is unbelievable.
Let's go over to the couch. We have air kicking up off the floor here. Oh yeah.
Again, not as much as with the longer rod, but there is definitely air coming up for sure.
Also, as much as I felt with some 52 inch fans. And the downfall, of course, that this is very noisy.
This is so loud, you might as well just use a portable fan, like a box fan or something.
But it does not detract from how impressive it is for the size.
Okay, now we'll shut it off. Zero. Come on, I'm trying to make a video.
All right, that's it for that one. 36 inch. I really probably should have been an industrial
grade fan, but yet was just a cheap economy grade unit sold at Walmart back in the 80s.
Unbelievable. Excellent performance. Excellent aesthetics. Can't beat it.
