5 ARCHERY MISTAKES and How To Fix Them

The Ancient Longbow Legacy
8 followers
3 Video Views·Apr 2, 2026
AI Generated·May contain errors
How's it going guys? Welcome back to another video. I appreciate y'all being here.
Today we're going to be talking about some archery mistakes that you might be doing
that I know I have dealt with in the past and ways to correct them. So all of these mistakes
are going to severely affect your accuracy if not addressed properly. If you're a new archer,
this can be incredibly helpful. If you are a seasoned archer, these are things that can creep
up at any time that you might have to deal with or re-address and not even know it. So hopefully
there's something throughout this video that you can take away and apply to your own archery game
and become a little bit more accurate on the range. First things first, if you are not subscribed,
be sure and hit the subscribe button. I really appreciate it. Let's get right into it.
All right. So for our very first mistake is the death grip, which applies torque to your bow.
Now the death grip that applies torque to your riser is a very common issue that I see on the
range as well as total archery challenge. And when people are put in high stress scenarios,
like shooting a whitetail or a big game animal that they are freaking out and they grab their
bow and they just rip it back. And that is the start of your shot execution, which is not
ideal. What the death grip looks like is when people come in and grab the grip of their bow,
like the handle of a hammer, they look like they're ready to swing a sledgehammer. And that
is introducing an incredible amount of torque to the riser, which is completely unneeded. If you
look at this, the way I had this gripped right now, if I just barely flex my fingers, look how
much that riser is moving. And I'm like barely torquing my fingers. So I'm going to go through
and explain the reason why that is an issue. And then the reason why you need to correct it,
because if you're over gripping your bow, there is torque applied to that riser that is completely
unneeded. A lot of times when people do this, they will see left and right misses. And if you're
shooting through paper, trying to tune your setup, this is a very common issue as to why you have
sporadic tears through paper. A lot of times people don't realize that or understand that
and start to tune their bow based off of a grip that is very inconsistent. Now, how can we correct
this so that we have a repeatable grip with minimal torque applied to the riser? I want you
to take an arrow out of your quiver. Now I want you to stand sideways as if you're going to be
shooting downrange. And I want you to pick up your bow arm and give yourself a thumbs up.
Now I want you to turn that thumb to one o'clock, two o'clock and open up your hand. That is the
position that I want your hand in when you go to put it on your grip and get ready to draw your bow.
Now where you want your grip, I want you to take an arrow and apply pressure to your hand right
where that grip is going to be. The reason I want you to do this with an arrow is it's a very small
diameter. It is very accurate feedback to what you want to be feeling on your hand. So again,
thumbs out, one o'clock, two o'clock, open that hand up. And where I want you to place that grip
is right there in your hand. So if you see on your hand, you've got this lifeline running through here
on your palm. It's like the meaty part of your thumb. That is where that grip should lie for the
neutral position and not applying torque one way or the other. If you have this grip like this,
you have unneeded torque on the bottom of your palm and the top of your hand that can influence
your riser any which way. If you have the grip too far out, you're not going to have the stability
and strength that you need in your hand in order to make this work. So the best placement possible
is thumbs up, one o'clock, two o'clock, hand open, grip on the inside of that lifeline,
on the meaty part of your thumb. That is going to be your most accurate and consistent grip.
Next, I want you to grab your bow and take your hand, place it on the grip and try to remember
the feedback that you just got from that drill with your arrow. Place that grip right on the
outside of that lifeline and try to remember that feeling. This is where your grip should end up on
the riser, just like that. When you go to draw, you might stabilize the front of your bow with
these two fingers, but once you're at full draw, your grip really shouldn't be introducing any
type of torque to this riser. At most, those fingers can kind of just rest right on the front
of that riser and just chill out. These fingers, nothing needs to be under tension. Just let them
sit right there all the way through the shot until everything breaks and you're good to go.
Pretty much all of my setups, I like to shoot with a wrist strap. I just use a small piece of
D-loop material. That wrist strap, if the bow jumps forward at the shot, it's going to catch it and
it's not going to let it drop out of my hand. But that's how little pressure I want you to have
applied to the grip on the front or from the sides. Just remember, torque applied to your riser
through your grip will cause inaccuracies downrange and inconsistent tears through paper.
There's so many issues that can creep up if you are death gripping that bow. Second mistake on
the list is having a nervous anchor, which can affect your shot timing and fatigue throughout
your shot. All right, so what do I mean by nervous anchor? This is a very, very common
issue that I see with archers. They will draw their bow, they get back, and then the second
they get back to their face, they really just, they're trying their best to get that peep just
right. And they cause like four or five second delay in their shot timing. So they're actually
adding fatigue to their shot just by messing around back here, trying to get the perfect
look through their peep. Obviously, the longer you have your bow back, the more fatigue is going to
set in. The sooner you can get your shot process rolling, the better. So when we go to draw,
what I'm looking for is draw instantly into your anchor, peep, I'm ready to go. We can start pulling
through my shot at that point. So it's a quick acquisition of your anchor points. And my anchor
points, I'm going to be looking for nose to the string, peep, perfect halo to halo on my sight
housing, and my hand just barely touching the side of my jaw. Again, what that looks like,
draw, anchor, peep, nose, we're good. We can start executing our shot. See how quickly that
acquisition happened? If you're someone, when you go to draw your bow and the second that thing
hits the back wall, you're trying to fish around for your anchor and see through your peep.
It's just a deteriorating situation before the shot process ever even happens. So make sure that
you're addressing stuff like that. And if you don't know if that's what you do, I would recommend
setting up a cell phone or setting up a video camera and film yourself drawing and anchoring
and shooting and see what's going on. If it doesn't look fluid, then there might be something
to address there. In order to correct this issue, there could be a couple of things going on.
One is that your peep height could be off. If you are coming in and having a solid anchor,
but you're not seeing directly through your peep right away and trying to fish and find that peep,
you might need to have your peep sight moved up or down in order to get that perfect connection
the second you come back. And also your anchor points might need to be addressed if that is
an issue that persists with you even after you've consciously recognized it. Draw length could also
be a contributing factor to not being able to find your anchor right away. If you're too long,
you're going to be fishing for it out here. And if it's too short, you're going to be all crunched
up trying to find it. So make sure you have the correct draw length, make sure your peep height
is at the right position, and then make sure you just have a solid anchor and a solid process.
The second you get back, you can just nustle right into that thing and you're ready to go.
The more you fish around in your anchor, the more your shot is going to break down.
Our third mistake on the list is going to be unconscious creeping. So unconscious creeping
is an issue that can pop up anytime in your archery career. It happens most often when an
archer is fatigued. So if you don't have a very strong posture in your shot and you allow these
things to collapse, you can start to have a lot of jumpiness off the back wall. You can manipulate
your draw length and not even know it. And your shot can just feel incredibly inconsistent. And
you don't know like, man, why did that? I'm not getting this shot to go off. It's not going off.
It's not going off. Well, it's because it's creeping backward on you or you're starting
to collapse your elbow. What your bow shoulder creep looks like is when you come and get into
your back wall, you either have already decided that you're locking in with a high shoulder,
which is very susceptible to creeping, or you're so fatigued. You don't even notice it as you're
pulling, pulling, pulling through your shot, that shoulder's getting worse and worse. And you start
to lean back and you can't, man, I can't get this thing to go off. Why is it not going off?
That is a very common issue with that unconscious creeping and a way you can figure out if this is
happening. Again, grab yourself a cell phone, grab a video camera and record yourself shooting
from a direct 90 to your chest. I want you to be able to see exactly what's happening. Are you
getting that bow back, settling your shoulders right away and holding strong? Or are you allowing
this collapse to happen? If you're allowing that collapse to happen, you're going to deal with a
back wall. You're going to deal with inconsistent releases and you're going to just have a lot of
inaccuracies. Now, another instance of creeping is allowing this elbow to come in. So I'm going to
show you what that looks like. If you allow that elbow to creep forward, you start transferring
the load to your arm. And when you transfer the load of this bow at full draw on your arm,
it becomes very unstable, really jumpy in the back wall. And it's really hard to execute
a true clean release. If your elbow is cocked in like that, typically, like I said, fatigue
setting in is mainly when these things start to persist and come about. But if it's an issue that
you deal with over time and allow it to happen over time, it can severely affect your accuracy.
So make sure that you're not creeping in your shot, both your bow shoulder and your elbow
coming in. Our fourth mistake on the list is an inconsistent release. There are a lot of things
to talk about on this subject, but the main driving factor for accuracy is having a consistent
release. If you are inconsistent with the way this release gets executed or the way you execute
your overall shot, you're going to have some issues. So we're going to shoot six arrows and
the first three arrows, I'm going to demonstrate what an inconsistent release might look like.
And then the last three arrows, we're just going to drive right down the center.
Same thing every single time. Inconsistent. Now here we go. Consistent. As you can tell with those
first three shots, my release fired and came off my face in a different direction each time. I see
that quite a bit, especially when people are under pressure and they're really rushing through their
shot. They just want it to go off. They just either hammer it and it goes flying out one way or the
other. And again, not very accurate. You're going to deal with some issues there, especially because
these new bows at full draw, while they are forgiving, there's not very much tension on
that string at full draw. Many of these bows have 80, 85% let off. I actually like shooting at 75%
let off, but with that type of let off, that string can be influenced with the slightest
movement. There's not very much tension on the string at full draw. So if you're coming off
with your release differently, every time you execute the shot, you're very likely going to
have different impact down range. Again, film yourself. If you're not sure whether this is
something you're doing or not, shoot five or six arrows, review the footage, and you'll know right
away whether you're being consistent or not. Our fifth and final mistake that absolutely robs you
of accuracy is that you just won't quit. And what do I mean by that? It's exactly what it sounds
like. You just won't quit. You've been at the range for two and a half hours. You've shot your
shoulder out. Your pin float is all over the place, super erratic. You're completely broken down,
but you start adjusting your sight based off the last arrow you just shot. And then you shoot
another one, and it's all over the place. Well, maybe I moved it too much. And you start moving
it the other way. You start messing with the tune of your bow and the tune of your sight based on
extreme fatigue at the range. I see it all the time. Obviously, if you start adjusting things
on your sight based off the fatigue from a long range session, the second you go back out to the
range on a fresh day, things are going to feel off, and things are going to be really messing
with your mind because you have no idea why this bow isn't shooting the way it should be shooting.
When in reality, you basically switched it up on yourself. So make sure that you know when to quit.
You know when your shot starts to break down, and you know when to walk away from the line. It is
much better to spend 30 minutes on the range executing great shots than to spend an hour and
a half on the range, and the last 30 minutes you're absolutely breaking down and doing everything
wrong. Know when to stop, know when to step away, and know when to come back another day. Hey, do as I
say, not as I do, because I am absolutely guilty of this last one. I will absolutely spend way too
much time behind my bow, but I am conscious to not adjust anything on my bow once my shot starts
to break down. I just love shooting my bow. It's tough. But know when to step away, and definitely
don't adjust things when you're tired. That's it for this video. Five mistakes that are ruining
your accuracy. I hope you could take something from this video and apply it to your own archery
game. If not, if you know somebody who might benefit from learning some of these things,
be sure and share this video with them. I appreciate you guys watching. Be sure and
subscribe. We'll catch you on the next one. Peace.
