Additional videos for this title: http://j.mp/1ru04C8 Film Craft 107: The Location Sound Mixer by Michael Wohl Video 8 of 20 for Film Craft 107: The Location Sound Mixer
Capturing sound for film is tremendously difficult at best. Imagine two actors, in dialog, walking down a busy traffic-filled street surrounded by camera crew, lighting and lots of other audio distractions! Its complicated. Its expensive to shoot. The director is intense and shes depending on you to make sure that the dialog is recorded as pristinely as possible! Still want to be a location sound recordist? Well, Michael Wohl is here to show you the techniques you need to know to get the job done right!
In this course, you learn all about recording audio for video and film. Recording begins with the microphone and Michael shows you, with tons of visual examples, everything you need to know! You learn all about mic placement, camera audio settings and all the different types of mics that youll need to capture audio in all kinds of on-set or location recording situations.
Next, you learn the ins and outs of the art of field recording. Michael shows you how to operate a boom and a wireless system. You see basic boom techniques and also how to stealthily wire the talent to capture the best audio possible. Now imagine having to run multiple mics with multiple recording systems! It can get really complicated!
Whether youre the director or the audio recordist, this course is required viewing if youre looking to understand the complexities of audio on the set! By the time you finish this course, you will have a deep education in location sound techniques that you can rely on to get you through any shoot! More info on this title: http://j.mp/1ru04C8
Operating a shotgun mic on a boom pole
is also very challenging.
Not only because it requires holding the pole
over your head for extended periods of time
while keeping absolutely still,
but also because it requires intense concentration
and focus on the scene.
Now while it's true that a shotgun mic
can record sounds from a distance,
the quality of the sound does diminish significantly
the farther away you are.
So your first goal is still to get that mic
as close as possible to the subject's mouth.
You'll be able to get a lot closer
during close-ups than during wide shots,
and that's okay.
Your editor's likely aware of that fact,
and so she's gonna try and use the audio
from the close-ups whenever possible.
However, within a give and take,
it's important that you keep the mic
a constant distance from the subject.
Otherwise, the sound quality and the volume
are gonna vary over the course of the shot,
which is undesirable.
Also remember that the mic is highly directional.
You need to point the tip of the mic
towards the mouth of whoever's speaking,
not at the top of their head.
Not in their general direction,
but at their mouth.
It really matters a lot,
and you need to have the mic in position
before they start talking.
Otherwise, we'll hear the sound quality change
as the mic comes into place.
And this is really where things get tricky,
because in most scenes, more than one person is talking,
which means you have to move the mic
from one person to the other during the scene.
So to boom properly, you need to know
exactly who's gonna say what, when,
and you need to get your mic into position
in time to hear what they're gonna say.
So how do you know when to be where?
From watching the rehearsal.
It's essential for the boom op
to be present in the rehearsal,
and in fact, the better you know
the exact rhythm of the scene, the better.
I have known boom ops who studied the script
as much as the actors do.
Moving the boom around silently and with precision
is an art unto itself as well.
Rubbing your fingers along the pole
can create audible noise.
If the cable is swinging around
and banging against the pole,
that causes noise too.
And different boom operators have different techniques,
and yet again, this is one more place
where the quality of your equipment does matter.
Using a high-quality, lightweight boom pole
with an internal cable
is definitely gonna make your job a lot easier
than working with a heavy, clumsy pole
with an external cable.
Every gram of weight matters.
If you do have an external cable,
you'll wanna wrap your fingers gently around it
to keep it in place while you record.
And one trick to keep from making noise
as you move the pole is to rock it gently
in the crook of your thumb and forefinger.
That way, by rocking your hand back and forth,
you can move it from one subject to another
with minimal noise and movement.
Practice this movement to get more comfortable with it,
and be sure to wear headphones while you do
so you can hear when your movements create unwanted noise.
There's also a whole other thing
that makes this job super hard.
You've gotta keep the mic, the boom pole,
its shadow, and your own body
out of the view of the camera.
And of course, you usually can't see
what the camera's seeing,
which makes this goal extremely challenging.
You're gonna need to work with the camera operator
to figure out how close you can position the mic
to the subject's mouth without being seen in the frame.
Boom in.
Up, up, and you're clear frame.
Thank you.
And again, this is another important reason
to have time to rehearse prior to shooting.
Dip the mic in as close as possible,
and then back it out slowly
until the camera operator tells you that you're clear.
Then, hold that position,
and then look at the wall or background behind the mic,
and draw an imaginary line
where your mic appears against that wall.
That way, during the scene,
you can use that line as a guide
for where your mic should be positioned.
This is also why it's almost always necessary
to hold the pole parallel to the floor above your head,
as opposed to at an angle from your waist.
The latter is, of course, more comfortable,
but the angled pole is far more likely
to be seen in the shot.
It's also important to think about where you should stand.
The farther away you are,
the longer you'll have to extend your pole,
which means a heavier weight for you to hold up.
Sometimes you may wanna stand on an apple box or a chair
to help you get higher.
For shots where there's a lot of movement in the scene,
think about where you can stand
that's gonna allow you to move
and follow the talent as required.
You may occasionally be tempted to boom
from below the camera line instead of above.
There are times that that's okay,
but pay attention to what's behind the subject
and still in the path of the microphone's pickup pattern.
Pointing upwards towards a ceiling with an air vent
or towards the sky is usually more likely
to introduce unwanted noise
than pointing downwards towards the ground.
And finally, accept that you're just not always
going to be able to get great sound on every angle,
especially on wider shots where it's just impossible
to get close enough to the subject.
As long as you can get good sound on those closer angles,
all should be okay.
Just be sure to let the director know,
and in some cases you may wanna record a wild take
to give the editor additional options.