How to Adjust & Tighten Toilet Seat

VideoJoeShows
86 followers
38 Video Views·Mar 30, 2026
https://www.youtube.com/user/VideoJoeShows
How to adjust & tighten a toilet seat is what this quick DIY howto video is about. VideoJoe is doing some work on a toilet & he just noticed that the existing toilet seat is out of whack & also loose & moving around. He can't have that so he whipped out his little screw driver & popped the toilet seat caps up & slid the toilet seat into place & tightened down the toilet seat mounting screws & done! Adjusting & tightening a loose toilet seat is easy...when you know how. Watch & learn as VideoJoeShows you how to adjust & tighten a toilet seat.
https://www.youtube.com/user/VideoJoeShows
I'm looking at this toilet seat.
See how it moves a little bit?
That's because these screws are loose.
There's just a cap here, and I think it pops up off of there
with a little screwdriver.
Let's see if I can find a screwdriver.
And, yeah.
It'll only take me a minute to fix that, I think.
I can get the cap off of there.
Let's see.
Can it pop off?
It's not.
Remember, these are sprink.
Okay, there.
That snapped off.
There's a Phillips screw in there.
I'll get my Phillips screwdriver.
And then there's a nut underneath.
I could hold that.
I just want to look at that
and just see what I need to do to tighten it up.
See, that one feels tight, and that one actually is tight.
Looks like that's the only one moving,
so I have to tighten that side up.
But, you know, look around on your toilet seat.
If your toilet seat's loose, go ahead and fix that
because I want to spend a few minutes to fix this
because here's my thought process on that.
I get all done with this toilet, and I tell the people,
yeah, I got your toilet fixed and everything,
and they look at it.
You know, if they see a loose toilet seat,
oh, yeah, how come that wasn't loose before?
How come you didn't fix that while he was there?
You know, it takes just a second to fix it.
You can't turn it all the way there.
There should be a nut on the back that you can tighten,
you know, a thumb turn,
or there might be a nut that you can get
with a little crescent wrench.
But just that little bit helped.
Okay, how long did that take?
Not very long.
Now, yours might be slightly different than that,
but one way or another, you should be able to get it
with a little standard slotted screwdriver.
Pry that up and tighten her down.
There you go.
