Carvin Quad X Tube Assignments

TheGospelGuitarist
1 follower
Mar 30, 2026
I go over the 9 tube assignments in the Carvin Quad X guitar preamp and discuss what I am personally using for tubes.
Hey Gospel Guitars here. I'm looking into the Carbon Quad X guitar preamp right now
and as you can see I've added some labels and from what I have learned and kept forgetting
so I put the labels in. Channel 1 and channel 2 both use Tube V1. Okay so basically I'm just
going to talk about tube assignments in this video. So V1 is covering both of your clean channels
and channel 3 uses V2, V3 and V4. Actually only the first stage of V4. So your crunch
channel gets two and a half stages or two and a half tubes for five stages.
Channel 4 has tube 5 or the last half of tube in V4 and then it has the rest of the tubes in the unit
V5 through V9 and so the one tube that's shared is V4. So whatever tube you have in V4 is going
to affect two different channels. Something to keep in mind right now I have two Tung Sols,
new old stock reissues in V1 and V2 and I really like the sound of the Tung Sols.
I have two Mullards in V5 and V6 and the rest are stock tubes, Chinese tubes,
but looks like what I'm going to do is go with two more Tung Sols in V3 and V4 and then get three
more Mullards for the last seven through nine. So that'll give me a tube configuration of four
Tung Sols and five Mullards. I really like the Mullard sound on distortion channels and
it's not so brittle sounding and it's more even to me and more musical to me and the Tung Sols
are just absolutely phenomenal tubes into clean channels. So that's the tube assignment of all
nine tubes in the Carbon Quad X and I'd suggest me doing a little labeling scheme here so that
you don't have to keep referring to your schematics to remember which tubes go to what.
So that's it for the video today. Thanks for watching. Hope it helped you out
and please remember to subscribe and like and share the videos.
