I know the lack of time stamps sucks. I'm going to work on an easier way to do it so that it can be done better and with better frequency.
Hey, everybody, welcome to LenoxCast.
I'm your host, Matt.
I'm Nate.
And I'm Drew.
I remembered.
Yes, you did.
Welcome.
Leave it to Nate.
In the number two slot, two weeks in a row, and 50% down.
So I always go by the way you guys are lined up in Jitsi, so it's kind of mixed up.
All right.
Hello, everybody.
Welcome.
I lost my train of thought there.
We are the LenoxCast.
We are a podcast about Linux, in case the name didn't give it away.
We're going to talk about some Linux-y things tonight.
We have some great tools to share with you guys tonight.
We're just going to do kind of a listicle-type, round-robin, underrated tools thing, but before
we jump into that, which should be awesome, we're going to answer a question that was
actually really hard for me, because there's so many answers.
So the question for our main topic tonight is, what is the one tech thing that you've
purchased that ended up being a complete waste of money from the minute you bought it?
Drew, take us away.
Wow.
So I don't know from the minute, but I do have regrets, okay?
And I think this is going to come to no surprise.
I bought and built a Threadripper PC, I don't know, five years ago, let's say.
Maybe thereabouts, all right?
Never should have done it.
Never got the full use out of it.
Couple thousand dollars out of the window.
And yes, I am going to try to make my money back a little bit, because I do have it.
I'm going to put it on the market.
But at the same time, am I going to make all my money back?
No, I'm not even going to come close.
It was a complete waste of money, resources, time, and the like.
Nate, what about you?
What one tech item that you've purchased that ended up being a complete waste of money?
Probably all of my monitors.
Whoa, okay.
All right, my $50 monitors though, I mean.
But if I'm not using all of them, it's kind of useless.
But you do use your monitors, Nate.
I've seen it happen.
Yes, I use quite a few of them.
You mean the ones you don't use?
Right, which is about like 20 of them.
Oh God, you have a problem, my friend.
How many are in the room with you?
Sometimes I swap them out, so.
I think that's the-
One, two, three, four, five, six, seven, eight, nine, 10, 11, if you count the laptop.
I'm down one.
Slowly weeding them out.
I have three, so I think that's good.
All right, so as I said earlier, this was a hard question for me because there's so
many potential options, but I ended up going with the Steam Deck because that thing has
been an enormous, just complete dust magnet.
It just sits in its case.
I don't use it ever.
I've probably put two hours worth of actual time on it since I got it.
It's the original.
It's horrible, and honestly, I'll be honest with you guys, number two probably would be
this thing here.
I bought the Switch.
This is the original Switch, the OLED.
I don't use it.
When I play a game, I play it on the computer.
I do have an Xbox here.
I have been using that, but only because my nephew and I play with it, so.
What are you pointing at, Nate?
I was going to say there's no monitor in the background, and I'm like, there's literally
one right there.
Yeah.
It just turned off.
Yeah, you went all pixelated, so you probably can't see it.
But yeah, you got to put some Hollywood back there.
Is that called Hollywood, the thing?
Matrix or something.
All right, anyways, pretty much anything gaming that I buy is a complete waste of money.
I could have used any of those things.
All right, so tell us in the chat what is one thing that you've purchased tech-wise
that ended up being a complete waste of money?
We'd love to hear from you if you're watching this live in the chat, or if you are watching
this on the edited version when it's posted on Saturday.
Let us know in the comments section.
We'd love to know exactly what it is that you splurged on and then immediately regretted,
whether that's because you regretted it or your significant other said, what the hell
did you buy that for?
All right, so we're going to go ahead and move on to the main topic, which is underrated
Linux tools.
Now, I use underrated Linux tools, but it can be things that work on Windows as well.
It's underrated tools.
We'll just say it that, okay?
So what I imagine here-
Well, that changes everything.
That changes the entire podcast.
Because we all know that Drew's just sitting there secretly a Windows user, right?
Yeah.
Now it's all coming out.
In reality, Nate's going to give us all Mac tools.
All right.
So what I imagine is that we'll do one each, and then we'll just kind of go around until
we run out.
Sound like a good idea?
All right.
Nate, why don't you take us off?
You go first.
I like BAT instead of CAT.
Damn.
BAT is a readable file viewer.
It's actually, I mean, it's fine, but BAT to me actually has a lot more real world usage
compared to CAT, but yeah.
BAT is a really nice COO tool that I think you should use.
So just for those of you who don't know, BAT is basically if CAT and LESS made a baby together.
Yeah, pretty much.
It's great.
Also syntax highlighting.
Fantastic.
Was that on your list, Matt?
Literally.
You guys won't be able to read it, but it's literally the first one.
So screw you, Nate.
If you literally somehow copied my entire list somehow, I'm going to be so mad.
What did I spend all this time for?
I'm going to take another one right off of Matt's list right now, baby.
What you got?
ROFI.
Oh, **** off.
You know what?
I actually had it number two on my list, thinking Matt would say it.
He would just kind of budinsky in there and say it right off the bat so nobody else could.
ROFI is what D-Menu would be if it went to the gym, basically.
Windows Switcher, App Launcher, SSH Launcher.
You can write a lot of custom scripts that use ROFI.
In fact, you could do your note-taking application in ROFI if you chose to do so.
Themes, switching themes, Matt.
I'm sure there is a ROFI theme switcher somewhere in your arsenal.
And so, yeah, it's not just an application launcher.
Even though it does that incredibly well, it is kind of like a tool that
is well underused for what it can do.
Totally agree.
I know there are going to be some people like,
oh, everybody uses ROFI who's like a window manager user, but still.
Not to the nth degree.
Very few people, I think, was, oh, yeah, I can just switch my application.
No, man.
Do some work.
Do some scripting.
See what you can output to ROFI.
I'm serious.
It's like, it's butter.
Anything that needs a selector tool just like instantaneously, like, oh, ROFI can do that.
Yeah, right there.
D-dubs in the chat says a wallpaper theme selector.
There you go.
Another thing.
And if you guys look on UnixPorn every once in a while,
there'll be someone who's done some really cool work getting ROFI display images and stuff.
You can do a ton of stuff with it.
So, yeah, definitely ROFI.
All right.
So seeing as how I have now two of them off my list, you sons of bitches.
I'm going to go with trash CLI.
So I have a tendency to delete things that I probably shouldn't.
So I looked into a way to make it so that when I use the RM command,
instead of actually deleting it, it just moves it to trash.
And trash CLI allows you to do that.
It's actually pretty cool.
I just aliased RM to trash put or whatever it is, which is part of the suite.
Trash CLI is actually a suite of trash commands.
And it just puts things in a trash can.
Basically, like, if you're on Windows from 98, you know, the recycle bin.
It's one of those things that just kind of lives in the background as an alias
that you kind of forget that exists.
But there's been many times over the course of the last year or so
since I started doing this where I've deleted something that I shouldn't have deleted.
And I can just go in the trash and get it.
And, like, hallelujah.
Other than it just being gone forever.
So I highly, highly recommend using it instead of regular RM.
Just in case.
It's insurance, is basically what it is.
So that is my first one.
I should mark Rofi off the list, though.
Okay, Nate, your second one.
My second one is actually something that's called DUF.
It's Disk Usage Clarity.
It replaces, basically replaces DF.
Because DF has the same problem where it just spits out a bunch of stuff.
And you have to kind of dig through it to see exactly what it is.
But with DUF, if you have multiple files or multiple hard drives in, you know, one system,
it will cleanly identify each drive.
And you can quickly find, you know, which one is getting really full
or which one's maybe having some issues.
So, yeah, that's it's a really good little tool.
I use when I decide I'm going to actually clean things.
There's one called, all right, I'm going to forget the name.
But there's one, it's a KDE tool.
It's like, I don't remember.
But anyway, someone in the chat will tell me because they all know things.
But anyways, it has that like weird like pie graph thing that you can kind of see.
You guys know what I'm talking about?
That's what I end up using.
So you're asking me about KDE.
One of these days, we're going to have Drew lose a bet.
He's going to be a KDE user for a week.
I think he's going to use it for a week.
I would do that, actually.
I would take that bet.
KDE would be a little bit harder.
We need to find something to actually bet on.
So, all right, Drew, your next one.
I'm going to go, you know what?
I'm going to leave that one for Matt.
And then I'll probably comment on that.
So we did a couple podcasts ago.
We talked about the Zed text editor.
I'm going to go back and I'm going to say Genie is underappreciated.
Genie is, and I've talked about it on this podcast a million times.
I've talked about it in probably six different videos on my channel.
But if you need an editor that is shy of an IDE, that is fast like a terminal,
that has plugin support, it is underrated.
It is good for scripting.
It is good for quick edits.
It is lightweight.
It lives in the weird middle between like nano and a full IDE.
And that's why it is as useful as it is.
Voice in the chat says it's called file light, by the way, for the KDE thing.
Genie is amazing.
Let me ask you this question, Drew.
How is Zed working into your workflow?
Or are you basically done using it?
I actually, yeah, after our pod, I decided to change my main key bind for editing to Zed.
So that I would like be forced to use it.
I'm still at 50-50.
Even with that, you know, even with, cause I said, super E is my editor and it opens Zed.
And then I set the other key bind, super shift E to open Genie.
And I'm using, it's still about 50-50.
If I'm doing anything really creative, I'm using Zed.
If I'm doing anything that is texty, then I'm using Genie.
And that's, and maybe that's where I stay.
You know, if I'm, if I'm being honest with myself, maybe that's just where I,
I kind of sit in the middle between those two.
Yeah.
I've, I've completely stopped using it, but I don't think that's much of a surprise.
I, I'm going to use my next one.
So I'm going to say Emacs is underrated.
If you'd asked me a year ago, if I was an Emacs user, it would have been,
**** off.
No, of course not.
I can Vim all the way.
Come on, man.
What is your, what is your deal?
But I love Emacs.
It's fantastic.
Now, have, have I made it work basically exactly like Vim?
Yes, I have.
But there's so much more that I can do it because of the way that it's a GUI application.
It can display things that, you know, you can't like variable text sizes and stuff.
It does markdown really, really well.
I have all these scripts and Rofi scripts and stuff that go into Emacs.
I have a whole bunch of key bindings that I've just created.
I don't know that I would say Emacs is for everyone because it's definitely not,
but I'm a convert.
It's good.
It's not for the lighthearted or the faint hearted, whatever it's, it's, it's a,
it's a chore to configure and you will spend more time configuring it.
You ever did them.
I guarantee, I guarantee it like Vim is a time hole to, to, to get your config ready.
But once you get your config done, you're good.
You know, you can just use it forever.
Basically with Emacs to this day, I'm still adding ----.
It's probably going to tip over like Charlie Brown's Christmas tree.
One of these days, just like air out and like spaz.
But you constantly like use, use a get repo just for your Emacs config.
It still lives in my main dot files repo, but it probably should have its own mainly because
it's getting to the size now where when you download it, it's like downloading some of my
wallpapers.
You know, it's just, it's seriously, it's not that it, but it feels like it's a very big,
it's a very big config because I basically created my own markdown
parser on my own instead of downloading anything.
So, and that's like half, half of that file is regex by the way, because it's looking for
like, um, it's looking for like every thing, like, um, listicle list items and links and
stuff like that.
So I have to basically suss out what, when it has those things.
So when it's in normal mode, it looks like a link when it's in, in insert mode, it's
expanded.
It was, it was a pain in the ass way over, way over engineered.
So, uh, anyways, Emacs is mine, which is just, uh, I said Emacs and DT appeared in the chat.
So it's like saying Beetlejuice, Beetlejuice, Beetlejuice over and over again.
All right, Nate, your next one.
We'll say to Emacs, I have never justified even him to learn it.
So I'm probably not going to learn it at all.
But that being said, my next one is TLDR.
Uh, basically it kind of replaces man in a way.
And one thing I like about it, instead of getting a wall of text, you can actually get
some useful commands immediately using a TLDR.
So it's a pretty good little slightly man replacer.
I wouldn't say complete man replacer, but good enough.
Just on that note, you can use bat as a man, a page reader as well for those of you who
are interested in using that.
It's very good.
All right.
Drew, your next one.
Matt, are you going to use Ranger as one of yours?
No, I don't use Ranger anymore.
Okay.
All right.
Well, I was going to use LF as a terminal file manager.
I, I think that I would, you know, I know that I know myself and I know that I'm going
to use Thunar 99 times out of a hundred.
Okay.
But I have used LF in the past and was always one that wanted to like do something more
with it and never really got around to it.
I'm still going to just kind of use it as one of my underrated applications or, or,
you know, things that we are, we're talking about here because it is fast.
It is written in Go.
I think it's, I think to me, it's a little bit more snappier, lighter, kind of easier
to use than Ranger.
I would, I appreciate Ranger.
I just think that LF would be my go-to if I was going to use a terminal file manager.
I used to use Ranger and then I got transitioned over to Yazi, which is one that's actually.
Okay.
I thought that you went from Yazi to Ranger.
I mean, from Ranger to Yazi back to Ranger again.
I did.
And then I went back to Yazi.
Okay.
You know me, Drew, I like switching things, but I'm pretty much on Yazi now for, for good,
I think.
Cause it is, it's, it's faster than Ranger is and not because for those of you who hate
Python, it's not because it's Python.
It's just the way Ranger is.
It's just Yazi is faster.
I will also say that I have learned to like the config for Yazi.
I, it's not as simple as Ranger, but it's, it's good.
So yeah, I use, it's actually my main file manager when I'm not using as DT said in the
chat, Dear Ed, which I use most of the time.
So, so my next one is, let's see here.
I'm going to go with a sync thing.
So Drew and I, and I guess the whole crew, we, we experimented next cloud as a, as a
synchronization manager thing.
But that, and I had a personal install of next cloud.
It just wasn't as good as I wanted it to be.
What I needed was a way to synchronize folders from one device to another.
And that's literally what sync thing does.
It's all it does.
It's the, it's a, it can be a little fussy to set up, especially if you have many
computers to do it.
But once you kind of get things in the right order and where you want them to be, it's
amazing.
Like there's no, it's weird for a sync tool to be instantaneous and sync thing is
instantaneous.
Like you put something in a folder, it's on all your devices automatically.
Almost the second it finishes uploading.
It's very, very good.
It can be set up to work across networks.
So if you need to access your stuff outside of a network, you can do that very easily
with some proxies and stuff.
And it just works very, very good.
My only big complaint about it is that every once in a while, there'll be some name
conflicts where if you change a name on one computer and it tries to synchronize it to
another one, you end up with some name conflicts.
So you kind of have to deal with those manually.
But other than that, it's been fantastic for syncing notes and books and all sorts
of stuff.
So highly recommend a sync thing.
It's very, very good.
Nate, your next one.
So I'm going to use micro.
Micro is basically a nano replacement.
And I know nano comes standard out of the box, but it has some of the stupidest key
bindings for a quick text editor.
So I like micro because it uses modern common sense key bindings like super q is quit and
super s is safe, which just makes sense.
So if you're looking for something that's just really quick to edit a really quick file
and you don't want to have to pull a VM all the time, then I would recommend micro way
over nano.
It's so weird, guys.
It's control s, by the way, not super s, but it's control s and control q.
Well, yeah, you get my point.
No, actually.
Okay.
Actually, no, I actually changed mine.
But anyway.
Oh, you changed.
Okay.
Yeah.
All right.
And micro can do that.
So there you go.
Okay, so first off, let's just it's so weird that nano created these very odd key bindings
and I just use the regular ones.
But I have a feeling it's probably because it existed before word existed and it's based
on Pika.
So that's probably the reason why it doesn't use the common sense one.
But yeah, I agree.
Micro is really good.
If you're not going to use emacs or them, I'm such a shell.
So true.
I needed to shave my head and I become DT.
All right, true.
Your next one.
FZF, the fuzzy finder.
Not just a file finder.
It's a framework for fuzzy searching anything.
Shell history search, file opening, kill picker, git branch switcher.
It works really well, by the way, with LF shell scripts, custom launchers and interactive
filtering.
So it is an underrated angle.
Most people install it and then stop at just using the file search.
I actually and I built an entire application around using FZF and then switch to micro.
Sorry, switch to Rofi rather.
But it was there.
I mean, I could use FZF for basically a framework.
It's it's outstanding.
And it's under appreciated, underused.
And it is very good.
I honestly don't use it as much as I should, though.
Like I see something like YouTubers use it like on their videos.
It's like, yeah, that looks really cool.
I should probably use it more often.
Nate, your next one.
Oh, wait a minute.
It's my turn.
Sorry.
No, it's your turn.
I don't you guys know me.
I can't keep track of ----.
All right.
So my next one is all right.
So I'm going to choose one.
This is proprietary.
I think I think it's proprietary anyways.
I'd expect it to be proprietary.
So it is called Cloudflare-D.
And this allows you to create Cloudflare tunnels that basically will expose a service that
you're running on your network to the Internet without opening up a port.
So a couple of things just to get out of the way.
Yes, it relies on Cloudflare.
Yes, Cloudflare is a big company.
Probably that makes them evil and all yada, yada, yada.
I don't particularly care because it's magic.
Like literally, you have the service running on your computer.
You set up the tunnel.
It's just a couple of commands.
And then all of a sudden, you can go to your your your subdomain or your URL and access
to that server, not only on your network, but anywhere you have access to the Internet.
It's it's amazing.
And for anyone who's ever had to delve into their router settings to open the ports 443
and 80 in order to get NGINX up and running, you'll know that that's just painful.
And it always niggles in the back of your mind that, oh, my goodness, I have open ports
to my network.
What's going to happen to me is, you know, are they going to steal all my identity or
whatever?
You know, so Cloudflare allows you to have the same experience of NGINX basically, but
without opening the ports.
So highly recommend that.
And I know someone's going to probably mention tail scale.
I don't care for tail scale nearly as much.
It's not that it's not also magic.
It's just doesn't seem to work as well for you when it comes to like third party services
that expect things to behave in certain ways when it comes to DNS and stuff.
So Cloudflare is mine.
All right.
Nate, your next one.
Mine is Zoxide.
Zoxide basically replaces CD.
You guys keep stealing.
I don't know if you're.
Do what?
Keep stealing mine, damn it.
Oh, it's OK.
Well, it's fine.
I have recently discovered it and realized that holy crap, this is way better than I
expected.
The fact that it it will remember where I've been before and I can just like type Z and
then the last bit of it and immediately pull like, oh, yeah, you this is where you're
wanting to go.
That has saved my bacon because, you know, I have dyslexia and sometimes I type the wrong
thing or the wrong words backwards.
And now I can just kind of, you know, type it out and immediately go right back to the
file that I was working on.
And yeah, Zoxide, it honestly, I have it on every Linux system now, to be honest, because
it's it's really that good.
And it gets it gets painful when you go into a Linux system that doesn't have it like
you're trying to go to your documents folder and you're just using this typing, you know,
CDs, D.O.C.
And it doesn't take you anywhere.
Yeah.
Oh, it's painful.
I so highly recommend Zoxide.
Very, very good.
Basically, you stop thinking about where the paths are.
You just type in is like, oh, yeah, it's here.
Once you visit a place one time, it just remembers it.
You can just you can just type in something vaguely resembling that.
You don't have to spell it right.
It will get you there.
It's great.
Honestly, it's what CD should be.
I think you might even said that it's like that's what they should literally just take
that and make it into CD.
It'd be great.
All right.
Drew, your next one.
So I don't know if everybody is like uses something like Flameshot to, you know, to
basically create screenshots of your of your PC of what's going on on your screen.
I'm going to say Flameshot, but I also want to put in a little bit of respect for XFCE
screenshooter because it is dead simple.
It has no frills.
Great.
If you need a simple screenshot, it is fast.
And Flameshot is a little bit of overkill for about 80% of use cases.
If you're just if you're just like doing a rectangle to screen capture some part of your
of your screen, because if you're not using annotation or thumbnails or, you know, it's
a little bit overkill.
But Flameshot is what I reach for probably every single time, although XFCE screenshooter
should be mentioned in the same light.
Pipdad in the chat mentions Spectre.
I think he means spectacle.
I might be wrong about that, though.
That's KDE's thing, and it's typical on KDE stuff.
Totally bloated.
Do you guys use like a screenshooter?
I use Grim and Slurp.
Okay.
Yeah, because of Wayland.
Because of Wayland.
Yeah.
When I first went to Wayland, Flameshot didn't work on Wayland.
It does now, apparently.
So if you want to use Flameshot on on Wayland, you can do that.
But yeah, I use Grim and Slurp, which is not ideal because you basically have to script
your own, like, mechanism.
But yeah, whatever.
What about you, Nate?
What do you use for screenshots?
Probably GNOME screenshot or Cosmic screenshot or whatever?
Yeah, I use the Cosmic screenshot.
I don't really change my screenshots very much.
As long as it works.
I will say if I have the option, I do go grab the XFCE one, just because it works.
It's all I need.
XFCE, the base of all tools.
If you can't find something that's good, just go use XFCE tools.
It's good.
And you don't have to download the entire stack, either.
If you want to download a KD tool, everything comes along with it.
You can't, it's so stupid.
Let's have the entire QT stack with that one.
Thank you.
Actually, one of the, okay.
So I don't have many bad things to say about OpenSUSE, which is completely off the cuff.
But one of the things that OpenSUSE does that's really stupid is that it tends to bundle
non-essential dependencies to certain applications.
So just for example, if you were to download NEMO, I think it's NEMO.
NEMO is the file manager for Cinnamon, I think.
So if you download that, it actually comes with a Cinnamon desktop on OpenSUSE,
or at least it did at one point.
It just downloaded the entire thing.
I don't know why.
I just thought that, like, that's just stupid.
All right.
So my next one, I'm actually going to kind of bundle these together,
because they all do the same thing.
I'm going to bundle COPYQ, WLCOPY, and XCLIP all together.
Basically, actually, scratch that.
I'm going to bundle WLCOPY and XCLIP together.
These are ways of copying things in the terminal that just make it easy.
So you can basically just pipe into one of these things,
depending on whether you're in Wayland or Xorg,
and it will put whatever came before it into the clipboard buffer,
which is, I use it constantly.
So I have scripts that will take my podcast and video descriptions
and pipe them into whatever I'm using,
and then put them into the clipboard so I can put them into YouTube.
I have things that allow me to take the last known,
for example, PWD.
I have a PWD alias that will print the current working directory,
but also will take that path and put it into the clipboard as well,
using one of these tools.
Because usually when I'm looking for the path,
I'm probably going to copy it somewhere,
so it just doesn't both at the same time.
So I use these things all the time.
WLCOPY is for Wayland, and XCLIP is for Xorg.
They basically work the same way.
The syntax is a little bit different, but it's the same kind of idea.
So those are mine.
Nate, your next one.
I'm going to use another one that I use off and on,
and it's called Stacer.
It's basically a system cleaner UI
that you can go in.
I mean, there's quite a bit that you can do,
but its main purpose is that you go in
and actually clean out all the residual things
that are left behind applications,
or maybe there's some things in your systems
that you didn't realize that is still sitting there
that maybe you thought you deleted.
So you can use Stacer to go in
and basically clean out your system and make it...
I mean, you're basically getting your storage back.
It's the whole point.
Do you remember the tool named Bleach?
Yep.
Like from ages and ages ago.
I'm sure it's probably still a thing.
Nothing goes away in Linux completely,
but it always had that warning that popped up.
Hey, don't use this tool.
Basically, if you don't know what you're doing,
you can just delete everything.
Wow. I haven't heard.
I haven't even remembered Bleach in ages.
Like Synaptic Package Manager back in the day.
All right, Drew, your next one.
I don't know if...
I've mentioned this before.
It's been quite some time since I've mentioned this.
It's called PDF Arranger.
And what I do for a living,
basically, I use a lot of PDF files for whatever reason.
And sometimes I need to either reorder,
rotate, split, or merge PDF pages.
And this is a kind of a necessity for me.
I need to be able to do all those things.
And it's a lot easier doing it in a simple GTK application.
As opposed to doing it in command line.
This does that.
It is completely underrated because it does one thing
and does it incredibly well.
Do you guys know that there are people still out there
who use Adobe Acrobat Reader?
No.
That's still a thing.
Yeah, it's still a thing.
Then there was a thing from back in the early 2000s.
It was around the time Flash games were a thing.
It was like Acrobat Air or Adobe Air or something.
A whole bunch of different applications were created in it.
Oh, man.
I don't know why.
PDFs always make me think of that.
All right.
My next one is...
I'll go ahead and use CopyCue because I mentioned it earlier.
It's not really the same thing as WL CopyNext Clip.
It's more of a clipboard manager.
So I should probably actually...
I'll bundle it with ClipPest.
I'll just use both of them at the same time.
So they both basically do the same thing.
CopyCue is more of an Xorg tool.
I think it will work on Wayland.
But don't quote me on that.
I haven't actually used it on Wayland.
Basically, it's just a GTK-based clipboard history manager.
ClipPest is specifically for Wayland, I believe.
And it does basically the same thing.
It's not quite as full-featured as ClipPest
because you have to kind of script it into RoPhi or D-Dimini or whatever you want.
Basically, it just keeps track of everything that you have in the clipboard forever.
I will warn you, don't show it on...
If you record videos, don't show it on videos
because chances are your passwords will be in there.
And it doesn't expire passwords.
So it just kind of shows up in plain text.
I've never made that mistake before.
One second.
Shit.
All the time.
I can't stop myself.
I just get this thing from the clipboard history
and oh, there's the password for my bank.
What are you doing, Matt?
All right, sorry.
So yeah, ClipPest and CopyCue are my next ones.
They're both very good.
CopyCue actually has some command line tools
that allow you to basically grab certain metadata
from things like if you want to copy GIFs or whatever.
So I was creating a GIF picker for Element
and it's actually kind of hard.
I think I mentioned this on the podcast a little while ago.
But it's actually kind of hard to grab a GIF and put it in the clipboard.
And because of CopyCue, you can actually grab all the metadata
associated with a GIF and copy and paste it.
Where you can't with some other tools.
So those are mine.
Nate, your next one.
I'm going to use another one called Timeshift.
Timeshift is basically a backup snapshot of your entire system.
Now, you can kind of tell it which files that you want to use.
I make it do all of it
because I always put it on a separate hard drive just in case.
And I've had many times,
especially in the video back in the years
where I've had to roll back to go back to a later driver
because the new NVIDIA drivers broke it.
So Timeshift, I think it should be installed on every Linux system.
You can use other things,
but I think it should be default and standard
just so that people have the option to turn it on and use it.
Yeah, it also works well with ButterFS.
So if you do ButterFS stuff, it'll do snapshots for that.
Maintained by the Linux Mint guys,
so they save their bacon because they're no longer useless.
All right, I can't not, you know, it's in the rulebook.
All right, Drew, your next one.
I have looked at a lot of like, I want a lightweight image viewer,
and I would be curious as to what everybody is kind of using,
whether it be in the chat or one of you guys.
I've been using QIMGV for a really stinking long time.
I know that SXIV is one that I've used in the past.
I like QIMGV better, even though it's a QT app,
which is very strange for me.
The other thing is I've been looking, I've found Loop, L-O-U-P-E,
which is kind of like the eye of GNOME replacement these days.
It's incredibly lightweight.
But as far as my personal preference, yeah, I use QIMGV.
I do something stupid.
I don't have one, so it just opens in Vivaldi, of all things.
And usually I forget that, so that, you know, like,
damn, why didn't that thing open from Yazi?
So I go into, I go searching around,
and then later I go back into my browser,
and there's the image that was open.
Like, oh, there it is.
Yeah, I should get an image viewer.
All right, so my next one is, I'm going to go with,
all right, you know, this is one I've been using a lot lately
because I've been having all the internet problems.
I've actually used it for quite a long time,
but I've been using it more lately.
It's called Speedtest Tracker.
It is a Docker container that basically just performs a speed test
and keeps track of your records for as long as you want.
You can set it, it basically has a cron environment variable,
and you can set it for an hour, three hours, whatever you want.
And it just runs a speed test and keeps it in a database for you.
And I've been using this to kind of keep track of,
because I was convinced,
because the way the internet was down
was it was almost always during a certain period of time.
I figured that there was someone on the node
uploading their torrents or whatever,
and that was the reason why we didn't have internet.
So I wanted proof so that if I could take them to court
or, you know, bury them in the backyard,
you know, I wouldn't get in trouble.
But that's what I've been using Speedtest for.
And it's one of those nerdy things
that you don't really need the stats for,
but it's kind of cool to have, like,
oh, this is how my internet's been fluctuating over time.
You know, oh, it was down for that period of time.
I wonder what happened there.
You know, so it's kind of cool.
So Speedtest Tracker, it's hosted, again,
it's in a Docker container,
so it's really easy to set up
and have running kind of in the background.
So that's my next one.
Nate, your next one.
So I'm going to use one, if you have an NVIDIA GPU,
and this is going to be mostly specifically to NVIDIA GPUs,
you can use something called Green with Envy.
And basically what it is,
is a application that allows you to overclock your GPU.
You can manage the fan speed, the fan curve.
If it hits a certain degree Celsius,
then you want to ramp it up to maybe 60% here,
maybe to 80% here.
And you can also cap it,
tell it don't go past 90% or something like that.
So it's a really cool little GUI
that you can use for Linux
and actually control most of your GPU.
Nice.
I have Green Envy a little bit now.
If only I used that,
I probably could have Resolve running.
Damn.
All right, Drew, your next one.
Yeah, I'm kind of at the end here.
So let me just say, and this is not really a,
it's a tool-ish, and we've talked about it before,
it's Fresh RSS, okay?
And it's self-hosted RSS.
It is full web UI, mobile-friendly.
The Docker setup is fairly simple.
And the pitch to you is that RSS is not dead,
even though sometimes it seems like it's going in that direction.
But you shouldn't let the algorithm decide what you read.
I guess that's what I am imploring upon you guys.
If you have the need to kind of curate the content
that you want to digest,
Fresh RSS is a way to take back your content consumption.
It is anti-algorithmic
and lands well with people
that want to kind of control what they see.
I will second everything he says.
It's very, very good.
Probably would not be very happy without it,
to be honest with you.
I would probably miss everything if I didn't have it running.
All right, Nate, how many more do you have left to go?
Do you know?
I have about four, I think.
Okay, so I have one, two, three, four, five, six, seven.
I have seven.
Okay, so we'll just do a little bit of a lightning round here.
So FFmpeg, I don't know,
it feels like it shouldn't be underrated,
but it is underrated.
It is amazing.
It will convert things.
It will allow you to stream.
It can edit thumbnails.
It can edit images.
It can edit videos if you know how to do it.
It literally does everything.
And any video or audio thing on Linux
is probably, at least somewhere along the line,
a front end for FFmpeg.
Without it, Linux would suck even more than it does.
So it's very good.
FFmpeg is amazing.
So definitely check that out
if you have audio or video needs.
So very good.
Nate?
I'll go along with the audio thing.
EasyFX is really good
if you're wanting to have a little bit more control
of your system as far as the audio goes.
And it works really well with Popwire.
So you can kind of tweak your speakers and everything.
Also, per application, you can kind of adjust what is what.
One application is way too loud.
So EasyFX is a really good one.
You said you're done, Drew?
Yeah, I am.
But since you did say something about FFmpeg,
I do want to say something about mkv-toolnix
because that kind of falls into that same category.
And if it wasn't for mkv-toolnix and mkv-merge,
which is a package part of that,
I would have no channel.
So there you go.
Thank you to those guys.
Yeah, because we'd have to take the Mickey out of Drew
if he was like, hey, you guys know what I did?
I installed Resolve this week.
That's never going to happen, bro.
If it did, we know there was something wrong.
All right.
My next one is WireGuard.
It's a VPN tool, basically.
It's the replacement for like OpenVPN and all that stuff.
It is astonishingly easy to set up.
You can set it up so that you can access your network
from outside of the network very, very easily.
And it's just very, very good.
So and it works with a lot of different VPN providers.
If you wanted to also attach it to an actual VPN,
like Proton or Movad works with both of those.
Very, very good.
So WireGuard.
Nate?
My next one will be InputRemapper.
It's a very good tool for like if you have controllers
or if you're trying to do certain keybinds
to a certain like a button on the mouse or whatever.
You can actually do that through InputRemapper
and you can create micro keys to quickly to hit one button
and it does the actual key bindings for you.
So it's a really good tool.
Okay.
I'm going to go for ListenBrains,
which is not a actual Linux tool.
I think it's like the only one on my list.
It's not actually a Linux tool,
but if you like to have those kind of like stats
that I was talking about
and you listen to a lot of music,
this will track all of your music listening habits and stuff.
And it also provides you weekly
and monthly like playlist recommendations
so you can kind of get some discovery tools.
This is especially helpful
if you're self-hosting your own music.
So it's very, very good.
Nate?
Along with that, Solar.
It's a Logitech control system.
It is available on Linux.
So if you have Logitech devices,
you may just only have to install Solar
and actually get quite a bit of functionality.
If you have any issues with remapping,
just use the remapper.
My second to last one is HandBrake.
I'm shocked that more people don't use it.
It feels like one of those tools
that should be as popular as like OBS
because it's open source.
It will rip DVDs, Blu-rays.
It'll convert things.
It does a ton of stuff when it comes to video.
It is complicated to use kind of,
but once you kind of get the hang of it, it's good.
So highly recommend HandBrake
if you have transcoding things that you need to do,
especially or if you're trying to get Blu-rays off a desk,
it will also do that for you.
So very, very good.
Nate?
The next one I'm going to use is Caffeine.
If you've ever had a situation
where you're trying to do some work
and you had to get away from your desk and come back
and the whole screen just shut off,
Caffeine is a very good call that makes your desktop
not go to sleep.
So I install that thing on every single Linux system that I use
and it works pretty well.
So that's my second to the last one.
I only got one more left.
And my last one is going to be also music related
is NaviDrum.
It's an open subsonic client.
It doesn't have the best UI ever,
but I use it as my main music server.
One of the things that I like about most
is that I have 13 terabytes of music.
And I was using Jellyfin
and Jellyfin does not like the fact
that I had 13 terabytes of music.
It was like, yeah, I'm going to be really slow forever.
And it's never going to speed up.
So NaviDrum doesn't do that.
It's just really, really fast.
You can search through it, create playlists,
all the things you normally do.
And because it's built on subsonic,
you can basically use it to stream
to other third-party clients as well.
And yes, I did just say 13 terabytes of music.
That's just the true story.
All right.
So Nate, you said you have one more?
Yeah, one more.
So most of you know that DaVinci Resolve
is my editor of choice, my video editor of choice.
But I'm actually going to use Kdenlove as one.
What's happening here?
And here's the reason why.
What's going on here?
Here's the reason why.
It is a Linux application.
It's a false application.
And it literally works on all three operating systems
that you want to use.
And it is available.
And it's free for DaVinci Resolve,
even though it is better.
If you want the full features,
you have to actually pay for it.
And that's the only thing that knocks it down to me.
So if you're looking for quick video edits
to be able to just do something to get started,
Kdenlove is really where you should start at.
I feel like I don't even-
Unless you've got money.
It's like, I feel like I don't even know
what's going on anymore.
I've completely lost the plot.
That's obviously a shocker, Nate.
Do you actually have Kdenlive installed?
I still have one on every Linux system,
just in case as a backup.
Yeah, I do too,
cause I use it to edit the patron end screen.
I've never transferred that over to Resolve
simply because, you know,
I might have to go to my Mac to actually use it.
All right.
I think that that's all of our underrated tools
that we wanted to share, boys.
Yeah. Okay.
All right.
So for those of you in the chat,
I know you've been kind of giving us yours as you go along.
So thank you very much for that.
If you have any more, leave them there.
If you're watching the edited version
that will come out on Saturday
and you have underrated Linux tools
that you'd like to share,
leave them in the comments below.
We'd love to hear about them.
You never know, we might find something
that we've never used before and enjoy it too.
So sharing is caring as they say.
So as if we haven't given you guys enough
in the way of recommendations and applications,
we now have the Nuggies to go to.
These are the Nuggies of the Week.
And this is the section
where we can basically choose things
that we've discovered or have to recommend
or we've created or whatever.
Basically, it can be whatever you want
and we share them with you guys.
So Drew, your Nuggie of the Week.
So Matt mentioned Cloudflare Tunnels
as one of the things that he talked about today.
I wanted to also mention Tailscale
and make that my Nuggie of the Week
because it's not like, you know, it's not new.
It's not underrated.
It's appropriately rated
and very, very good at what it does.
Cloudflare Tunnels would be like,
okay, I want the internet to reach my service.
Okay, Tailscale on the other hand
is I want to reach my machine.
And so in order for you to get an idea
of how that would work,
I mean, I'm talking to the 85 people in the chat here
that already know all this stuff.
But, you know, if you want to host your own Forge Yo
and you want it to be like get.thelinuxcast.org,
you would use a Cloudflare Tunnel to do that
so that it would be a public facing application.
Whereas the three of us use a SFTP server.
It's not open to the public.
It's just for us.
And that is why we use Tailscale appropriately
for the SFTP server.
Only we can use it.
So it is something that I think
if you haven't used or have found the need for it,
give it a shot.
Private Mesh Networking.
Well, also they're very generous
with their free tier or whatever.
You can use it on a hundred machines for free
without ever having to pay for it.
And they're also very supporting of like open source.
So yeah, good stuff.
Nate, your nugget of the week.
So I'm going to get away from the Linux stuff
and actually go into a little bit of a Mac type thing
because I have been having, as I said earlier,
having a live in hell with OBS.
And basically what I've tried to do is
I've got that Z Fold 4
that has the messed up inside screen.
And I decided I wanted to make it
the actual top-down camera.
So I have proper, you know,
good looking video for the top-down camera.
Well, that led into me trying to get NDI working
and I've tried it on three different operating systems.
And that led to the Windows machine
actually having AMD drivers issues.
The Linux machine refusing to open OBS
because of the plugin was corrupted
and the Mac OS just totally forgot everything.
So with that being said,
I have found a program called Camo Studio
and basically it will allow you to take your phone
and do it just by regular USB-C
and it pulls up Camo Video
and then you can just pull it
as a regular web source in OBS.
It is stupid easy and simple.
So if you are trying to do some streaming
and you want that feature and you have an old phone,
I highly recommend it,
especially if you've got a Mac or Windows machine
just lying around or something.
What was that tool that Josh and Steve and Tyler
used to have us use?
It was like a...
DroidCam and that stupid thing never worked.
Yeah.
It would constantly drop out.
It was based on...
I tried it.
It was based on like, I don't know.
It was, it's just, you're right.
It's just never worked.
All right.
I did it again.
No.
Not only did I do it again, I did it twice.
This guy.
So I have an addiction to fountain pens
and I'm trying to spread it to as many people as possible.
That's just sounded so wrong.
But it's not.
It's a little true.
So my actual Nugget of the Week is this.
It is the Magon.
M-A-G-J-O-H-N.
I think that's how you say it.
It's definitely how you spell it.
And this is the P140.
One of the reasons why I like it
is because I have big man hands
and usually these pens are pretty small.
You know, this one here is the TWSBI Diamond 580.
And you know, this is a very good pen.
But this one here is thicker
and I like a much thicker barrel pen
and it's much more comfortable.
It just runs smoothly.
It doesn't cramp in your hand.
It's fantastic.
It's also about 50 bucks.
So it's not cheap, but it's also not like,
you know, it's not, you know, terribly expensive.
It could have been a lot worse.
This one here is Asvine.
I don't know what the name of it is.
It's pretty good.
It's much finer tipped than the Magon is.
So yeah, if you're into fountain pens,
follow me for my upcoming fountain pen YouTube channel.
I'm going to have to start something
in order to finance my addiction.
I need that YouTube money.
All right, that is it for this one, guys.
So thanks everyone who joined us live.
We record this live every Tuesday.
If you're interested in watching us live, we do that.
You can catch us at youtube.com slash linuxcast.
Next week, we have someone joining us.
It's going to be awesome.
I'm not going to drop who that is,
but spoiler alert, they were in the chat tonight.
So it should be fun.
If you can't catch us live, we do edit the podcast.
It's posted on Saturday evenings.
It's edited by Mr. Nate.
Thank you so very much, Nate.
That's posted on all of your podcatchers and YouTube,
wherever you can basically catch the show.
If you do listen on Apple or Spotify,
make sure you leave us a review.
We'd be really appreciative of it.
Leave as many reviews as you possibly can.
Just go there, spam reviews.
We promise your account won't get suspended or anything.
It's going to be fine.
Anyways, that's going to be great.
So make sure you do that.
If you want to get in contact with the boys,
Nate is NatePicksTechWorld on YouTube.
Lately, he's been doing streaming.
So he also does hardware-related stuff on his channel
and all sorts of stuff.
It's amazing.
Go check out his stuff.
Drew is JustaGuyLinux on YouTube.
He does Debian and scripting and window managers
and homelabbing stuff, all sorts of stuff.
So go check out his channel as well.
So very, very good.
I'm, of course, TheLinuxCast.
Like and subscribe if you would, please.
You can contact us via email, email at TheLinuxCast.org.
What else did I forget?
The Lug.
So if you're watching the live, if you're watching live,
we are doing a Lug on Thursday evening, 8, 15 p.m. Eastern time.
If you want to join or you can watch live,
we will stream that as well.
It should be fun.
We are going to finally get back into doing these twice a month.
So if you can't join us on the late one,
there'll be an early one in early April as well.
So make sure you subscribe to TheLinuxCast
so you can keep track of when that happens.
If you're interested in joining a Linux user group,
we have a lot of fun.
So check that out.
So that is...
Check out the shop.
Oh, yeah, yeah.
The shop, shop.TheLinuxCast.org.
All good stuff.
We're actually all wearing hats from the shop.TheLinuxCast.org tonight.
It's very good.
A whole bunch of awesome merch there.
I do need to put up some new stuff though.
I've been thinking.
I have some general ideas for some new merch.
So stay tuned for that.
All right.
We're gonna head out of here before we get to an hour.
So we're done.
We'll see you guys next week.
Cheers.