How Much My 2-Story Container Home Cost to Build

Design Ideas
29 followers
In this video I answer the most asked question throughout the build which is "How much does it cost?" The Pacific Bin is a vacation rental located in Sultan, Washington built from 5 shipping containers.
#containerhome
AI Generated·May contain errors
Here it is, the video that everyone has been waiting for.
And that's how much the Pacific bin costs to build.
The Pacific bin is a 1600 square foot,
three bedroom, one and a half bath,
Airbnb in Salton, Washington.
And in this video,
I'm going to be giving you a full breakdown
of all the construction costs,
all the way from clearing the land,
all the environmental, critical area studies,
everything that went in to making this home become a reality.
This video took me a really long time to put together
from going through every single credit card statement
to every single wire transfer that went out
for the entire build process
to give you guys a to the penny accurate build cost
for the Pacific bin.
So it would really help me out a lot,
just liking this video and subscribing to my channel
if this is content you guys enjoy watching,
because there's definitely gonna be more of it
and the next builds are already in the process.
So I really appreciate it.
Thank you guys so much.
And let's dive into the full cost breakdown.
So the very first step after acquiring the land
was getting a critical area study.
A critical area study pretty much tells you
where you can build on your property.
It tells you where the wetlands are,
where any of the steep slopes are,
which I have a whole other video breaking that down,
the whole permitting process if you want a more deep dive.
But the critical area study was $3,925.
So once I found out roughly
where all the critical areas are on site,
I needed to locate the four corners of my lot
so I'd be able to lay out exactly where the home goes.
And that survey cost me $10,000,
which before I hired the survey company,
I roughly laid out based off of what Google Maps showed me
and using the little blue dot that shows your GPS location.
And it was crazy how accurate it was.
It was accurate to within two feet.
So for the next build,
I'll know I won't have to do that again
and I can just get close enough with Google Maps
and save you $10,000, a little pro tip there.
Now I knew with building the bin,
I wanted it to be a fully permitted structure
so that down the road,
I would be able to pull equity out in it
as it is recognized as a single family home
here in Snohomish County.
In order to do that,
I had to have full structural and architectural plans
and that cost me $10,700
to get engineered plans for the bin.
There was a lot of structural reinforcement
involved with all the cutouts we had,
the way we stacked the bins.
Containers aren't meant to be stacked perpendicular,
like you can see with this bedroom hanging out here.
So we had to do some special engineering.
There's all sorts of structural steel braces
in the walls that had to be engineered.
So both the engineering and the architectural plans,
like the layout of how the home actually looks inside
was $10,700 all in.
So while we were working on the structural
and architectural side of the plans,
I was able to kick off the civil engineer,
which all the civil engineer really does
is come up for adequate drainage for the property.
So whenever it rains,
all that rainwater that hits the roof
doesn't just drain right next to the home.
So it actually goes out to an infiltration trench
where it's able to seep back down into the ground
and hit all the reservoirs and underground rivers.
So that's all that the civil engineering plans were.
And those were $6,180.
Once I had all those documents together,
I was able to submit them to Snohomish County,
which kicked off a really fun $9,924.11 fee
to just review those plans,
stamp them and tell me I'm ready to go build.
So I'm getting a little ahead of myself there.
Before you get issued your building permit,
you also need the health department
to buy off on your septic design,
which meant I needed a septic designer
and that cost me $3,000.
The septic designer tells you where your drain field
for your septic system, where your septic tanks
and where your well has to go
because your well and septic drain field
have to be far enough apart
that your poopy water isn't draining into your well water.
Definitely don't want that.
So once you get all of those steps put together,
you can finally get issued your building permit.
Now that I had my building permit in hand,
I could finally start the construction process,
which meant with the bin being a shipping container home,
I could buy the boxes.
So I bought all five boxes for just shy of $33,000,
which checks out to be about $6,600.
And a little pro tip,
if you're buying shipping containers on the West Coast,
make sure to buy right around Christmas time
because that's when China ships in all sorts of toys
and there's usually a surplus of boxes on the West Coast.
So another little pro tip there.
So it turns out that rock is very expensive.
All of this rock used here on the driveway,
it's a 500 foot long driveway,
and to stabilize the foundation cost me $6,000,
which was way more than I had anticipated,
which also leads into my next cost,
which is rental equipment.
So doing most of this work on weekends
and just taking random days off of work
to rent bobcats and mini excavators
to excavate for the foundation and everything
cost me $7,400.
So now that we had a driveway
to be able to get heavy equipment back here,
we could kick off one of the first big steps
in construction, which was drilling the well.
So the well goes down 260 feet
and it cost us just shy of $22,000.
And that also includes all of the pumping equipment
that's inside the pump house here
to be able to draw water up from that well
and push it into the house,
which leads us to the next cost,
which is the pump house,
which my brother-in-law and I built,
which cost us about $2,400
and pouring the little concrete foundation,
the rock underneath,
framing the whole thing, metal roof,
and insulating the walls
so that when it freezes in the winter,
the stuff inside all the pumps
and everything doesn't freeze.
You see that little box right there?
That box cost me $27,000,
which sounds absolutely absurd to me,
but there's only one power company out here
and they can really charge what they want,
which if you work for a power company
and can explain that sort of ridiculous cost to me,
please drop in the comments below.
I would genuinely love to hear.
That $27,000 pretty much includes the transformer
and then running the lines from the street
all the way down to my transformer
and hooking it up to the meter here on the house.
When doing shipping container construction,
if you have a lot of large windows
or you're stacking the boxes in a unique way,
a lot of structural steel is actually needed
to be able to reinforce the boxes
because containers are natively intended to be stacked
on the four corners.
They're not intended to be stacked perpendicular,
like we have them here at the bin.
So there's actually all sorts
of structural steel reinforcements.
There's four by four angle that makes up the windows.
There's some huge C channel
that are tucked inside these walls
to be able to support the large overhang here.
And there's all sorts of interior
and beams on the rooftop
to be able to support this unique design.
All in all, my structural steel package
cost me just over $20,000.
At this point in the build,
I actually built out my website.
So with the home being a vacation rental
that you can stay at,
which if you do wanna stay at the Pacific bin,
the links down below to the Airbnb
or my direct booking link,
where you save about 5% off of Airbnb.
But I built out my Squarespace website,
which cost me about $300
with the whole emailing campaign
and everything that I'm able to do
to utilize my own direct booking site.
That sounded like it was a sponsored bit.
It's not sponsored.
I just genuinely love Squarespace.
So after that, I ended up building my foundation here.
So I hired a contractor and it cost me $23,000.
So the foundation,
as it was designed in the structural engineering plans
is to have a two foot wide footing
running all the way around the perimeter
for the three boxes that sit on the first floor here
and a four foot knee wall.
So we actually have a four foot,
or actually it's a little bit greater.
It's almost like five foot crawl space underneath the bin
to make it really easy for the electrician
and the plumber to be able to run everything.
And it turned out it was such a good decision
making a large crawl space.
It made everyone's job a lot easier
and it could make servicing things,
if things ever need to be serviced way easier in the future.
So now that I was starting to dive into construction,
starting to cut out windows, weld everything up,
I had to start ordering all the materials
that would take a long time to get here,
which the hot tub was one of them.
And my budget estimate was way off on this.
I think I budgeted $6,000
and it turns out this saltwater
seven person hot springs hot tub cost me $17,000.
This one hurt.
But with the bin being a really high end luxury home,
I knew this was something I couldn't skimp on
and end of the day, I love this tub.
It is like, it smokes any other chlorine tub out there
and I love this thing.
So now we're starting to get to the fun numbers here,
which these numbers made me realize,
oh crap, I am actually doing this.
The window and door package.
So for those of you that don't know,
you wanna make sure to order your window and doors
right off the bat,
because they typically take anywhere
from three to six months.
I think mine took about four and a half months
to get onsite here.
So make sure you order your windows and doors
as soon as you can
and just know that they're gonna cost a lot.
Mine costs $36,000 for all the windows and doors.
Granted, there are tons of windows.
The entire master bedroom is just surrounded
with three sides of windows
that just put you right in the forest,
but just know windows and doors are very expensive
and that was a hard pill to swallow.
While I was working on the home,
welding on all the windows,
getting everything set to be able to start framing
and insulating,
I kicked off the septic install team,
which cost me $24,000.
So that includes this drain field here,
which you can't see, but all this was dug up.
They put a bunch of drain lines, drain rock,
which this is ultimately where all the water
from the three settling tanks is pumped out to
and it drains down through the earth.
A few other things I had to order for the home,
one being the Tesla wall charger
for anyone that has a Tesla.
This cost me $440,
as well as the SpaceX Starlink satellite dish,
which all in all cost me $2,200,
which I know now they're like $500,
but I ended up buying one on eBay for $1,500
because I wasn't sure if my reservation
was gonna come available by the time the bin was launched.
And then my reservation came available
and I ended up spending another $500 to get a second one.
So I've got a second Starlink all ready to go
for the next build.
After all the structural steel reinforcement
of the bin had been completed,
that kicked off the wood framing of the bin.
So pretty much framing out all the walls,
laying all the underlayment
and all of that lumber cost $6,700,
which at the time was so expensive.
Materials were up like two to three times
what they were the year prior.
And I absolutely got my shirt taken from me on that one,
but it is what it is.
We had to get it done.
So once framing had been completed,
we could then kick off the electrician,
which the electrician for the bin was just over $26,000
and my plumber was about $17,000 for the entire home.
So when I was in the heat of construction,
I was almost just taking bits and saying,
yes, let's go.
Let's just get it done.
Cause I knew I had to get this on Airbnb
as soon as possible.
So one of the trades that I felt like
I sort of got taken on was the HVAC.
So I have five of these mini split head units.
There's two on the main floor, three upstairs.
So one in each bedroom.
And all in all, my HVAC cost me $28,000,
which looking into it now, I got kind of ripped off.
If you've been following the Pacific bin on Instagram,
you know that everyone had a heyday with this,
but my deck all in all cost me about $26,000.
And that includes all the concrete for the footings,
all the lumber for all the structural support underneath,
as well as the timber tech decking,
which was almost like $18,000 in itself.
Now this decking will never go bad.
You'll have to power wash it
maybe once every seven or eight years,
but you'll never have to worry about
replacing it like a cedar deck.
And all in all, we have almost
a thousand square feet of deck space here.
So there's so much outdoor area
that really $26,000 seemed pretty fair to me.
So the only gas appliance at the bin
is actually the fireplace here.
And the fireplace all in all was about $6,000.
And that includes them coming out,
installing the fireplace and hooking up all the gas lines.
So with the home being an Airbnb,
we wanted to make sure that the floors
would be as durable as possible.
And it turns out that hickory
is some of the most durable hardwood out there.
So we went with real three quarter inch
tongue and groove hardwood throughout the entire home,
excluding the bathrooms,
which have some matte black hexagon tile
to meet the Scandinavian design theme.
All in all, we were in $17,000 for the hickory wood flooring
and the tile flooring in the powder room,
the main bathroom, and also the steam shower upstairs.
Arguably one of the coolest features about the bin
is that we have two spiral staircases,
one here in the main floor
to get you to the bedrooms upstairs,
and the other one on the exterior
to get you between both of the decks.
We were in about $15,000.
Now I paid full price.
I paid the full $15,000 for both of these.
But after the fact, Iron Shop actually reached out
and they said they would like to sponsor
this full breakdown video,
which their team was absolutely amazing to work with.
I have nothing but praises to say about them,
from the accounting phase
to them helping to walk me through
the process of building this.
With container construction being a little bit different
than traditional construction,
their team really helped to walk me through
exactly what I needed to take into account,
since the floors aren't just a typical nine foot ceiling
like it would be in a normal home.
I love the product.
It is just super durable.
It feels so solid.
And I mean, just look at it.
It looks so stinking good.
So some of the cool features about the bin
is that we tried to incorporate nature as much as possible
by bringing some warm wood tones into the home.
And between our live edge island top here
and the resin poured walnut dining room table,
we're in about $9,000.
Keep in mind that we did do a collaboration for the table.
So it was a bit cheaper.
A normal table like that would be in the $20,000 range.
We went with quartz countertops here at the bin
to almost mimic concrete
for that more industrial modern feel,
which all in it was about $10,000
for both the whole kitchen package here,
the powder room and the main bathroom upstairs.
I feel like this video is getting a little long,
so I'm gonna do some rapid fire
running through some numbers of the not so sexy things.
So for all the paint,
including the exterior and the interior of the bin,
we're in about $3,100.
The closed cell spray foam insulation cost was $19,500.
And you do have to use a closed cell spray foam
if you're doing shipping container construction,
otherwise you're gonna have condensation problems
with your insulation getting moist over time.
So the closed cell actually bonds to the metal
and creates that vapor barrier.
There's a welding inspection, which was $432.
I paid $400 in eye doctor appointments.
There was actually two times throughout the build
that I got a chunk of metal jammed in my eye
and they had to go in.
One time they scraped it out
and the other time they had to take a little drill
and drill it out
because it was starting to rust in my eye.
So that wasn't fun.
Wear your safety glasses.
I even was one of the times
that still managed to get in there.
My metal roof was $17,650
and I wanted to use a metal roof
so I never had to worry about changing it down the road.
It's just, it's a really bulletproof way
to waterproof yourself for years to come.
So you don't have to worry
about changing roofs in the future.
So as for all of the soffits and overhangs at the bin,
I used a product called Lux Architectural Products,
which was about $11,500 installed.
The product was actually about $7,000
and the install made up the rest of that.
And the product is so cool.
It looks just like wood.
I've had so many people being like,
oh, where'd you get that wood?
It looks so cool.
But it turns out it's actually just printed metal.
The drywall was $11,500.
My propane tank that feeds the fireplace was $126.
I just bought it at Lowe's.
The glass door that leads to the steam shower
was about $2,100.
So my blower door inspection, which was $400,
which pretty much explaining
what a blower door inspection is,
is they pressurize your home and see how much it leaks.
So like the little joints in the doors
and there's a certain threshold
you have to hit per building code.
The asphalt entrance to the bin,
which this one kind of frustrated me,
is because all my neighbors have rock driveways out here,
but per building code,
the first 20 feet of your driveway out here
has to be asphalt
so that you're not tracking rocks onto the county roads,
which it makes sense,
but still eating an extra $3,350 was pretty frustrating,
especially right at the end.
For all the furniture in the home,
we ended up right around $14,000.
Keep in mind that if you're doing this yourself,
it's most likely it's gonna be a little bit more than that.
As the Instagram size of the bin grew to be 750,000 people,
a lot of furniture vendors are willing to work with the bin,
give heavily discounted prices.
Lovesac provided a $12,000 couch in the living room for free
just for a few Instagram posts.
So please keep that in mind if you're doing this yourself.
Furnishings will probably be quite a bit more.
The last big expense I have on here is for $31,000
and that's my small tools and equipment.
So that's whenever I needed nails or nail guns,
drills, welders, propane tanks,
pretty much anything that's involved with small tools
that would go into assisting me in the build process.
All in, the total cost of construction was $542,451.92.
Sorry, I added everything up wrong when I was filming,
so back to the video.
Which sounds so crazy to me,
spending that sort of money on a home like this,
but it really does pencil out.
So with the total build costs plus the property,
it checks out to be about $750,000,
which this home could resell right now
for around a million dollars.
So in all the sweat equity that my friend's family
and I poured into this home,
we've generated about $250,000 of equity
if we were to sell it tomorrow.
Please keep in mind that the cost of construction
here in Washington is significantly more
than most other areas of the country.
That's my total all-in cost breakdown video.
That really took me a long time
to go through all these numbers,
so I'd really appreciate it if you guys can like this video
and subscribe to the channel if you want more breakdowns.
I'm gonna be giving all sorts of breakdowns
on how my Airbnb is doing,
and if you wanna stay at the bin,
I'll drop a link below,
and I really appreciate you guys supporting me in that way.
So I'll see you guys in the next video next Saturday.
