How To Polish A Car For Beginners At Home || Remove Swirls and Scratches || Ceramic Coat

Screw Driver
87 followers
#machinery #motorbikes #occupations #career
Quoted source: Stauffer Garage
@StaufferGarage
Polishing A car using an easy polish car method in today's car detailing episode on Stauffer Garage for beginners! If you have any polish car tips, leave them in the description box below! Cleaning a car and detailing a car is one of the most satisfying and rewarding experiences. Thank you all for your support each week and if you are new be sure to Subscribe & Turn On Notifications for New disaster detailing videos!
AI Generated·May contain errors
Today I'm going to share with you the five steps that you need to know
to polish your car's paint and remove all scratches and swirl marks
and apply a ceramic coating. If you're a complete beginner this is something that
you can accomplish too, or if you're a professional. But I'm
going to share with you all my tips and tricks
so you can do this at home as well. So let's jump right into it. Here's the
before of this Yukon Denali. As you can see there are swirl marks
everywhere on this paint. We got a couple deep scratches up here but the swirl
marks and spider webs are insane on this thing and this happens
when people drive their car through a car wash.
Those automatic car washes do this to your paint, completely destroy it.
But you know what, honestly no harm against that. We can get this completely
corrected and removed very very simply. So let me show you
all the products that you need. So in order to polish your paint this is what
you need. You need some sort of polishing compound which
the Meguiar's Ultra Finishing Polish and the Ultra Cut Compound.
This is probably one of your most economical but go-to products that just
work. You have your harder cut compound for the deeper scratches
and then you have your finishing compound which is if you have light
swirl marks you can almost get away with just using this. And when it comes to
polishers, this is a small circular polisher. This
allows you to get into those tight to reach spots that are around your bumper
and it's not those larger panels like your doors or your hoods.
Now this is my Milwaukee 21 millimeter cordless
orbital polisher. This one rotates in an orbit which
allows you to not have to worry about your paint being burnt
but any random orbital polisher like this one which is corded,
this one you can also pick off of Amazon. Any economical random orbital polisher
will work. Now when it comes to polishing pads, this is a softer core
microfiber pad. Microfiber pads is kind of my go-to just because they have come a
long way with making the work a lot quicker.
This one's a thinner stiffer backing plate for the deeper cuts.
The softer ones are more pliable and friendly when it comes to removing
or you can go to the tried and true foam pads
and this one's from Lake County. Comes with three different
pads orange, white, and black. Black being the softest, white being mid-grade, and
orange being the stiffest. When you get to the stiffest grades
that's when you're trying to cut more. The softer ones are for when you're
trying to do your fine finish polishing with like a polish like that. So pads are
not necessarily the end of the world but Lake County or a high-end microfiber
pad always seem to be something that I would
recommend picking up. You also need a stack of clean microfiber towels.
You're going to need some sort of clay bar along with clay lube which can just
be water and soap. So you can slide your clay
bar after you've washed it to remove imperfections on the paint
before you polish. Next thing you're going to need is some sort of, so this is
3D wipe surface prep, just rubbing alcohol from the store.
You're using this after you polish to remove any oils or residues.
The other product that I like to use is this light. It does allow you to have a
wide range of light to see all the scratches and imperfections.
And this is a polishing pad for removing polish
and cleaning the pad in between each door panel or pass.
You just have your pad spinning and you use this to kind of scrape it
and brush off any of the residue. There's tons of different ceramic coatings you
can get. They come in little bottles like this. I always fall back on Cerakote for
their ceramics because they make the best in my opinion in the industry.
But any other off-the-shelf ones work, just sometimes they don't last as long
as a more high-end professional detailing
ceramic coating. But this one is the one that I like to use from Cerakote.
Now when using the clay bar, all you want to do is make sure you have a flat
surface. You spray on some of your clay lubricant.
And what you're going to do is take that clay's flat surface pad
and you're just going to lightly with two fingers just press down a little bit
and let it slide across the surface. And by doing that you're going to feel
high spots. You're going to feel rough points and those rough points are
contaminants that didn't come off in the wash phase.
And you're removing them with the clay bar to
pick them up so your polishing pad doesn't scrape dirt across the surface
of your paint. The clay bar is to take up the big stuff
and not remove any scratches. It's more of just a prep stage
and you want to do it on the entire vehicle which should take you about an
hour to complete. Once you've covered one spot, fold the
clay bar over and press those contaminants into the
clay bar to reveal a flat new surface with no
contaminants. That way you can remove from the next
panel. So I've added this tape line here and this is just for polishing to kind
of show you the difference the before. So before super swirled on both sides
and I'm going to polish this side to show you the difference
in between the two. So this is the side we hit with the ultra cut compound. This
side we did not. You can see here it's not absolutely
perfect but the larger imperfections compared to this side all of these
higher deeper swirl marks were completely cut down and removed.
The ultra fine polish will then go through and take care of those minor
scratches that you see. But the main point of this step, the
first step, is to take care of all of the deep
big scratches that you see on this side that were removed from this side. Now
that we got the entire hood done with the ultra cut compound, so the
ultra cut, the stronger cut, always change your pads. You want to
change your pad at least every four panels. So four
doors is equivalent to one pad and in between
that pad you're going to use that brush to
essentially remove some of this and then blow it out to get any of that powder
from the actual compound removed. But now that we're going to switch to the
ultra finish compound we're going to use a new pad. This is a
softer one but for finishing still microfiber but more of a finishing pad
with a finishing compound. Now that we have the hood completely polished there's
just dust from the polishing compound on the hood it's time to use our rubbing
alcohol to spray on the entire surface, clean it off so it removes any oils or
any residue left over from the polishing phase before
we put on the ceramic coating. When you're applying the ceramic coating
you're obviously putting all those drops onto the pad itself.
You're barely putting any pressure and you're doing half
overlapping passes to ensure that the coating is completely covering the
surface for the area you're working on. Usually
you want to work on like a three by three surface maximum
and once you do it this direction you're going to want to turn around and go back
in the other direction. The whole point for this is you're doing
an even cross hatch to ensure that you're covering the entire surface.
Once you have the coating applied you're going to want to let it sit and flash
for about two to three minutes. It is dependent on the manufacturer so
every time you do this look at the bottle and the instructions
for the product that you're using for the ceramic coating
and then you're going to just buff it off with a microfiber towel and the
whole point is as this flashes you're just leveling
off the coating so there's no high points
so that we have a clean glass ceramic coating on the surface.
When you're buffing off and leveling the ceramic coating with your
microfiber towel you're barely using any pressure and
you're just lightly dragging across the surface.
If you want to see a complete car getting detailed and ceramic coated and
polished click this video right here on screen and
subscribe if you're new and if you like today's video
and i'll see you guys next time
